Sign In

LITTLE GIANT PUMPS 2-MD-SC Series Semi-Corrosive Chemical Transfer Pumps

Filter
Bearing Type: Thrust , Capacity: 8.5 gpm , Cord Length: 6 ft. , Cord Type: 3-conductor SJP , Design: Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level , Discharge: 1/2" MNPT , Full Load Amps: 1.43 , Gasket Material: Buna-N , GPM At 1 Feet: 8.5 , GPM At 3 Feet: 7.8 , GPM At 6 Feet: 6.8 , GPM At 9 Feet: 5.5 , Height: 5" , HP: 1/25 , Impeller Material: Glass Filled Polypropylene , Inlet: 1/2" FNPT , Length: 8.9" , Liquid Temperature: 150 Deg. F , Max. Specific Gravity: 1.1 , Max. Viscosity: 100 SSU , Motor Enclosure: OPFC , Mounting: Horizontal , Outlet: 1/2 MPT , Type: Magnetic Drive , Width: 4"
StyleModelVoltageAmpsHzWattsPrice
A
580523
115V6.460109W£375.39
RFQ
A
580503
115V1.4360109W£375.39
RFQ
A
580513
230V0.6450/60100W£373.52

2-MD-SC Series Semi-Corrosive Chemical Transfer Pumps

Little Giant Pumps 2-MD-SC Series semi-corrosive chemical transfer pumps are specifically designed for handling semi-corrosive chemicals, including acids, alkalis, solvents, brine, plating solutions, sterile solutions and fluids. They have glass-filled polypropylene impellers to withstand the abrasive effects of particles and solids suspended in the pumped fluid, resulting in long service life. These chemical transfer pumps can be operated at water temperatures up to 150 degrees F. They have seal-less magnetic drive for use in-line, non-submersible applications. These chemical tranfer pumps have nitrile O-rings for preventing leakage. They are equipped with a ceramic thrust washer and shaft for handling thrust loads. These chemical tranfer pumps are available in 115 and 230V variants.

We are here to help!

Looking for a part not listed here?