DAYTON AC Motors

Includes NEMA Premium rated Dayton motors ideal for applications in conveyors, pumps, fans and compressors. Available in steel and cast-iron frames and different voltage specifications and rpm ratings

Dayton general purpose open drip-proof motors are ideal for non-hazardous applications with pumps, machine tools & ventilation equipment. These motors are equipped with ball bearings for low rotational friction and feature frames made of steel / rolled steel / cast iron for structural rigidity & corrosion resistance. They allow face / cradle / base mounting for easy installation and deliver speeds up to 3555 rpm. These motors are capable of being operated at a maximum ambient temperature of 40 degrees C and are available in 1 & 3 phase configurations.

Dayton 1/3 Hp, general purpose motors operate with high torque and greater efficiency, ideal for non-hazardous applications, such as machine tools, fans, compressors, conveyors, pumps and material handling tools. Unlike single-phase models, these units do not require start / run capacitors or centrifugal switches that may fail or wear, causing issues like motor shutdown, overheating and vibrations. They have rolled steel construction for durability and ball bearings for smooth and continuous operation. These units further come with open drip-proof enclosures with ventilated openings, allowing inflow of cooling air directly over motor windings, thereby keeping internal components safe from overheating. Choose from a wide range of these three-phase motors, available in 1.15 and 1.35 service factor options.

Dayton belt drive motors are ideal for turning a pulley or belt for powering HVAC equipment such as air coolers, roof ventilators, belt-drive fans & air circulators. These motors are equipped with ball / sleeve bearings for less motor friction and reduced noise at low speeds. They feature an open drip-proof enclosure to prevent motor overheating and offer face / cradle / stud mounting for easy installation. With a maximum nominal efficiency of 74%, these motors are available in shaft lengths of 1.875, 2.25 and 2.437 inches.

Dayton general purpose AC motors are ideal for use in pumps, conveyors, fans and blowers. These 3 phase motors are capable of producing a power output of 1.5HP and a maximum speed of 3510 RPM. They feature rolled steel construction in NEMA 56 frame and are equipped with a keyed shaft designed to be rotated in both clockwise and counterclockwise directions. The NEMA 56H denotes that the motor has 3 & 5 inch mounting holes, while NEMA 56C denotes the motor is face-mounted. They have ball bearings for smooth operation and Class F insulation to tolerate high temperatures during the operation. Choose from a wide range of 3 phase motors, available in 8.75 and 9 inch shaft lengths on Raptor Supplies.

Dayton general purpose totally enclosed fan cooled motors are designed for pumps, fans, conveyor belts, compressors & machine tools. These continuous duty motors feature a foot-mounted steel frame for reduced vibrations, anad high-performance ball bearings capable of withstanding heavy loads. Class B and F insulation provide safety from electrical hazards.

Dayton 3-phase general purpose AC motors are used in water heaters, pumps, conveyors and off-road motorised equipment. These continuous duty motors feature NEMA 56 rolled steel frames for structural rigidity & corrosion resistance and are equipped with ball bearings for low rotational friction. They deliver speeds up to 3470 RPM and allow shaft rotation in both clockwise & counterclockwise directions. These motors conform to CE, CSA and UL standards and are NEMA Premium rated, providing excellent energy-saving efficiency. Choose from a wide range of these Dayton 3-phase motors, available in 77 and 83.5 percent nominal efficiencies on Raptor Supplies.

Dayton general purpose motors are used with compressors, fans, conveyors, pumps, material handling and machine tools. These units feature open drip-proof (ODP) enclosures that have ventilated openings to allow inflow directly over the motor windings to dissipate heat due to continuous operation. They include shaft slingers for sealing shaft bearings against dust and other contaminants while retaining lubrication. These motors have steel construction with 3-phase motor design to operate with higher torque and greater efficiency as compared to single-phase models having the same power outputs (hp), speeds (rpm) and frame sizes. Choose from a wide range of these general-purpose AC motors, available in horizontal & all angle mounting positions.

Dayton split-phase general purpose motors are designed to power blowers, fans and small conveyors. These motors have both main and auxiliary windings to provide both clockwise and counterclockwise rotations. The motors are enclosed in a steel constructed NEMA rated frame for protection and easy replacement. The keyed shaft makes rotation easier and decreases the chances of an error. Choose from a wide range of these TEFC motors, available in 1/8, 1/4, 1/3 and 1/2 HP power ratings on Raptor Supplies.

Dayton 3-phase general purpose AC motors are ideal for use in pumps, ventilation equipment, machine tools and other industrial equipment to eliminate the need for capacitor start motors. These 3-phase motors feature three windings for creating a naturally rotating magnetic field to rotate the shaft and NEMA-rated construction in rolled steel frame for durability. They have Class B insulation rating for safe use and are equipped with ball bearings for smooth operation. The motor can produce a max output of 1.5 HP and max speed of 3600 RPM. Choose from a wide range of 3-phase motors, available in 50 na d 50H frame variants on Raptor Supplies.

Dayton three-phase general purpose motors are ideal for high torque applications, such as compressors, fans, conveyors, pumps, material handling and machine tools. These units feature rolled steel frames for durability and structural rigidity and have ball bearings for a smooth and continuous operation. They have open drip-proof or totally enclosed fan cooled enclosures for keeping the internal components safe from overheating and moisture. Choose from an extensive range of these class F insulated motors, available in power outputs ranging between 1 and 3 hp.

Dayton capacitor start general purpose motors are designed to power commercial, industrial, centrifugal and hydraulic pumps, fans, blowers and conveyor equipment. These single phase 50 / 60HZ motors can produce a maximum output of 2HP and delivery speed of 3450 RPM. They feature NEMA rated frame with rolled steel construction and open dripproof enclosure for durability. The shaft can rotate in both clockwise and counterclockwise directions for better work feasibility. CSA-certified and UL-recognised for reliable operation. Choose from a wide range of these general purpose motors, available in power ratings of 1/4, 1/3, 1/2, 3/4, 1, 1.5 and 2 HP on Raptor Supplies.

Dayton 3 phase general purpose AC motors are designed to power fans, pumps, ventilation equipment and machine tools with higher torque and greater efficiency than the single-phase models of same specifications. These motors feature NEMA 56 frame containing 3 windings to create a rotating magnetic field and provide continuous shaft rotation in both clockwise and counterclockwise direction. They are Class F insulation rated for protection against high temperatures. They are horizontally, faced mounted and are CE, CSA and UL compliant for safe operation. Choose from a wide range of these general purpose motors, available in 1160, 1720, 1765 and 3520 RPM ratings on Raptor Supplies.