TEXAS PNEUMATIC TOOLS TX-JF24 Jet Fan Air Driven, 24 Inch, 1 Inch NPT Air Inlet

Texas Pneumatic Tools TX-JF24 air-driven jet fan is ideal for general ventilation of tanks, process vessels & other confined areas that require the removal of hazardous fumes or contaminated air generated during welding, sandblasting or other operations. This air-driven Texas Pneumatic fan uses compressed air through a 1-inch NPT inlet to power it. It produces a maximum airflow of 16136 cfm and is suitable for use as a blower or exhauster as well.

Features:

• Texas Pneumatic Tools TX-JF24 air-driven jet fan has a rotating hollow shaft without torque & blade design that drives the fan using the compressed air jets on the fan blades' trailing edge. This design also allows more air movement at lower fan blade speeds.
• It has four precisely-balanced blades that generate adequate static pressure to withstand the ventilated system's resistance.
• All the blades feature airfoil cross sections for increased airflow & higher induction ratios while two of the four blades feature jet outlets for compressed air.
• The fan's housing has 6 guide vanes for neutralising the blades' air spin & redirecting the airflow into an axial direction to eliminate turbulence and a smooth inlet bell for greater CFM & lower noise levels.
• The unit has a rugged cast aluminium housing & fan blades that are heat treated to T6 aircraft aluminium specifications.
• It also has bearings with hi-tech synthetic lubricants and air seals that can handle high pressures for long operating life.
• Users can also choose Texas Pneumatic TX-JF20 jet fan for delivering a maximum airflow of 10420 cfm.

Compatible Accessories:

• Jet Fan Repair Kit: This kit contains the original replacement parts used in this fan to replace or repair any faulty part.
• Safety Lock Cable: This safety lock cable is attached to the fan's air inlet connector for preventing injury due to accidental disconnection & whipping of an erratic hose under pressure.
• Swing Gate: This gate provides increased safety in confined spaces.
• Fan Screens: Texas Pneumatic TX-JF2004 & TX-JF2404 fan screens prevent loose debris from being pulled into the fan.
• Texas Pneumatic Moisture Separating Systems: Texas Pneumatic TXMSS-400 & TX-MSS-800 systems are used for a regulated supply of dry air to the fan.

Standards and Approvals:

• AMCA Standard 210

Frequently Asked Questions:

Q. How to do maintenance on this Texas Pneumatic Tools TX-JF24 jet fan?

A. This Texas Pneumatic fan has rugged construction and minimal maintenance requirements. It can be easily disassembled & reassembled for quick maintenance. Users just have to bleed any compressed air left and disconnect the compressed air line to the fan before following the procedures.

Q. What are the fan blade speeds in this Texas Pneumatic Tools TX-JF24 jet fan?

A. This Texas Pneumatic fan can rotate at speeds ranging from 1565 to 3138 rpm at air pressures ranging from 40 to 100 psi.

Q. What is the maximum air pressure that this Texas Pneumatic fan can handle?

A. This Texas Pneumatic Tools TX-JF24 jet fan can operate at a maximum pressure of 150 psi.