Sign In

EATON Breaker Rejection Bracket Kits

Eaton breaker rejection bracket kits are used with Magnum insulated-case power circuit breakers to prevent the insertion of a draw-out circuit breaker into an incompatible cassette.

Filter
StyleModelPrice
A
2A11893G92
£274.88
RFQ
B
2A11893G01
£274.88
RFQ

Features

  • Eaton 2A11893G92 features a narrow frame suitable for use in compact areas or panelboards with limited area.
  • This brand's 2A11893G01 comes with a universal frame that can fit various circuit breakers.

Standards and Approvals

  • UL

Frequently Asked Questions

How to install Eaton breaker rejection bracket kits?

  • Figure out the location and number of washers, hex bolts and stop nuts to be used.
  • Place bolts & lock washers in the correct rejection bracket holes and attach stop nuts from the other side.
  • Attach the rejection bracket that has been put together to the breaker's bottom.
  • Remove the one M6 x 40 mm bolt that is visible and use it to attach the rejection bracket to the rear housing with a helical washer (discard flat washer if so equipped).
  • To attach the opposite side of the bracket to the front housing, use the two included M6 x 20 mm hex bolts and M6 helical washers.

We are here to help!

Looking for a part not listed here?