Source Any Part Request Now

Multiple Purchase Options Request for Quote

NET30 Terms Apply for a Trade Account

DESTACO Pneumatic Toggle Clamps, 847 Series

Filter
Clamp Bar Opening: 94 Deg.
StyleModelHolding CapacityClamp Arm StyleCylinder BoreClamp Arm LengthPort SizePrice
A
847-S
1000 Lbs.Solid Bar1.97"4.87"1/4 NPT£1,053.23
B
847-U
1000 Lbs.U-Bar1.97"4.87"1/4 NPT£1,052.74

Pneumatic Toggle Clamps, 847 Series

Destaco 847 Series pneumatic toggle clamp consists of a built-in flow control that eliminates the need for an external source to control the flow. This 847 Series toggle clamp can handle a maximum pressure of 145 psig and is available in different bar styles, opening angles and holding capacities.

Uses

  • Destaco 847 Series pneumatic toggle clamps are ideal for assembling, checking & welding fixtures in the consumer goods, aerospace, automotive and food & packaging industries.

Features

  • Destaco 847 Series pneumatic toggle clamps are integrated with a built-in flow restriction mechanism that eliminates the need for external flow controls.
  • These pneumatic toggle clamps are equipped with an ergonomic handle grip that offers operator comfort.
  • They come completely assembled and ready to operate.
  • Selected models are supplied with flanged washers (247109) for a secure connection against vibrations.
  • Destaco 847 Series pneumatic toggle clamps are sensor ready to accommodate T-slot (8EA-109-1) or round (810169) sensors.
  • These models are switch ready for 4 mm or 6.5 x 5 mm sensors.
  • These pneumatic toggle clamps have magnetic piston rings that allow precise position sensing.
  • They feature a large opening angle that ensures easy component removal.

Compatible Accessories

  • Destaco 247109: This flanged washer is used with Destaco 847 Series pneumatic toggle clamps for maintaining sufficient load to tighten gaskets and bolts of a flange during clamping. This flanged washer is made of steel to provide structural rigidity and for resisting corrosion on exposed surfaces.

Standards and Approvals

  • These Destaco 847 Series pneumatic toggle clamps are constructed in accordance with international standards like ISO 14001:2015 & ISO 9001:2015 for ensuring environmental health & safety and quality performance of the clamps.

Installation

  • These Destaco 847 Series pneumatic toggle clamps come with through mounting holes on the base that help the unit to be easily installed to surfaces.

Frequently Asked Questions

How are horizontal pneumatic toggle clamps used?

Horizontal toggle clamps use an over-center locking action to hold a workpiece or fixture in the locked position.

What is the benefit of using a toggle clamp over other types of clamps?

The main advantage of a toggle clamp is that it is quick-acting. These clamps can generate high holding force from the limited amount of force you put into the clamp.

What is the difference between a horizontal and vertical hold down toggle clamp?

A toggle clamp is very flexible. The only difference between a horizontal and vertical hold down toggle clamp is the handle and bar. Both move in different directions. A horizontal clamp has the handle positioned horizontally (parallel with the base) when the clamp is locked, whereas a vertical clamp has the handle positioned vertically (perpendicular to the base) when clamped.

How much pressure is a toggle clamp capable of?

Destaco horizontal toggle clamps apply downward clamping force by increasing the applied load via toggle mechanisms. You can see the clamping force on the packaging itself, which is specifically measured in Newton. Use the information with the size of the toggle clamp to work out the degree of pressure that the tool will have to exert on a piece of wood. The larger the wood, the greater the pressure required. So, we would suggest, whether a clamp is not strong or large to apply enough pressure, it is a must to use a variety of tools. This gives a boost in the pressure.

We are here to help!

Looking for a part not listed here?