Onboard Raptor as a vendor
Email Phone
main product photo
In stock
Sku
AJ7YTZ
Be the first to review this product
Add to Wish List Add to Compare
1 HP Turbine Pumps
DAYTON
Dayton turbine pumps are engineered to manage liquids with entrained air, generating pressures without vapour locking. These pumps are suitable for use in commercial and industrial boiler feed, pressure service, water treatment and reverse osmosis filtration applications. Choose from a range of these turbine pumps, available in 1 and 3 phase variants on Raptor Saupplies.
More Information
Model No4JPE2
Harmonization Code8413702005
ItemTurbine pump
Seal ApplicationLong life When not Run Dry or Pumping Abrasives
Seal MaterialBuna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring
Seal TypeMechanical Seal
Service Factor1.4
Shaft Material304 Stainless Steel
TypeCentrifugal
Voltage115/230
Volute MaterialBronze
Wetted MaterialsBronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel
Gpm @ 10 Psi11.5
Phase1
Gpm @ 100 Psi7
Gpm @ 30 Psi10.6
Gpm @ 50 Psi9.4
Gpm @ 60 Psi8.9
Gpm @ 75 Psi8.3
Gpm @ 80 Psi8
Screw MaterialSS
Nema/iec Frame56J
Hz60
Bearing TypeBall
Best Efficiency Gpm @ Head9.4 @ 50 Ft.
Best Efficiency Range Gpm @ Head25 - 65 @ 10.9 - 8.7 Ft.
ConstructionBronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.
Drain PlugEasily Accessible at Bottom
DutyContinuous
Gpm7.5
Gpm @ 20 Psi11.1
Gpm @ 40 Psi10
Height8.1"
Housing MaterialBronze
Hp1
Impeller MaterialBronze
Amps14.4/7.2
Impeller TypeOpen
Inlet Pressure132 PSI
Max. Case Pressure200 PSI
Max. Fluid Viscosity100 SSU
Max. Liquid Temp.-20 to 230 Degrees F
Max. Pressure120 psi
Max. Specific Gravity1
Motor EnclosureODP
Motor Rpm3450
Motor TypeCapacitor-Start, Induction Run
Frame56J