Sign In

ALLPAX GASKET CUTTER SYSTEMS Arch Punches

Allpax arch punches are ideal for punching out bolt holes having sizes ranging from 3/16 to 2 inches. They can punch out precision-sized round holes in gaskets ...Read More

Filter
Material: Forged Steel , Number of Pieces: 1
StyleModelDiameterNo Of PiecesCoating FinishHeightLengthPrice
A
AX1821
1 1/2"--2.6"6.7"£82.87
B
AX1817
1 1/4"--1.8"5.7"£57.36
C
AX1824
1 1/8"--2.5"6.3"£131.29
D
AX1815
1 1/8"--1.9"5.7"£52.56
E
AX1814
1 1/16"--1.6"6.4"£63.58
F
AX1823
1 3/4"--2.6"6.6"£101.44
G
AX1819
1 3/8"--2.5"6.6"£71.48
H
AX1816
1 3/16"--1.9"5.7"£57.36
I
AX1822
1 5/8"--2.5"6.6"£92.76
J
AX1818
1 5/16"--1.8"5.5"£64.98
K
AX1820
1 7/17"--2.1"5.8"£81.52
L
AX1813
1"--1.7"6.6"£43.99
M
AX1805
1/2"--0.9"4.9"£29.48
N
AX1801
1/4"--0.6"4.8"£26.88
O
AX1825
2"--3.3"7.4"£178.68
P
AX1809
3/4"--1.8"6.6"£35.53
N
AX1803
3/8"--0.6"4.8"£27.67
N
AX1800
3/16"--0.6"4.8"£26.88
Q
AX1807
5/8"--1.7"6.6"£34.31
N
AX1802
5/16"--0.7"4.85"£27.67
R
AX1811
7/8"--1.7"6.5"£41.50
S
AX1804
7/16"--0.6"4.8"£28.74
T
AX1806
9/16"--0.9"4.8"£39.33
U
AX1808
11/16"--1.7"6.6"£35.53
V
AX1810
13/16"--1.7"6.6"£41.50
W
AX1812
15/16"--1.4"4.9"£43.99

Features

  • Arch punches from Allpax have drop-forged steel construction with a black oxide finish for preventing bending / breaking under harsh usage, ensuring long-term operability.
  • Their arch design safely transfers the impact force from a hammer on the punch handle to its cutting head.
  • They have finely honed cutting edge that cuts out gasket material cleanly.
  • Cutting head of the punching tool is equipped with an inside taper for quick & efficient clearing of punchings.
  • Arch punches have their size stamped on them to avoid accidental choosing of a wrong-sized punch tool.

Frequently Asked Questions

How to operate Alpax arch punches?

  • Secure the prepared gasket on a flat, hard surface.
  • Mark the location of bolt holes on the gasket using a pencil or marker with appropriate spacing.
  • Measure the size of the bolt hole and choose an appropriately sized arch punch.
  • Place the cutting edge of the arch punch over the marked bolt hole on the gasket & strike the other end with a hammer.
  • Remove the punched out material from the arch punch and repeat the process till all the bolt holes are punched out.

We are here to help!

Looking for a part not listed here?