Utility/Dewatering Pumps

Filter

Utility / dewatering pumps are used to remove or level the water table from mines, basements and backyards by the method of centrifugation. These pumps feature an impeller which creates a...Read more

DAYTON -

Plug In Utility Pumps, Stainless Steel Base
Dayton plug-in utility pumps are used for draining excess rainwater from window wells & stairwells, and removing standing water from yards & flooded basements. These pumps feature a stainless steel base for structural rigidity and 3-conductor SJTOW cords that are resistant to oil & water. They are integrated with dual ball bearings for less rotational friction while running at a maximum speed of 3450 rpm. These dewatering pumps are capable of withstanding liquid temperatures up to 104 degrees F.

Style	Model	GPM of Water @ 5 Ft. of Head	Amps	Diameter	Height	HP	Length	Maximum Head	Width	Price (inc. VAT)
A	11C685	21	3.2	5.625"	10.625"	1/4	10.625"	20 ft.	5.62"	£287.37
B	11C686	76	7.5	6.5"	15"	1/3	15"	32 ft.	6.5"	£296.48
B	11C687	83	11.4	6.5"	16 15/16"	1/2	16 15/16"	35 ft.	6.5"	£336.57

ALLEGRO SAFETY -

Style	Model	Price (inc. VAT)
A	9404-02	£826.32
B	9404-04	£700.64

Plug In Utility / Dewatering Pumps
Dayton plug-in utility / dewatering pumps are used to transfer moderate amounts of water in areas where electrical outlets are not present. They feature stainless steel / polypropylene construction to resist chemicals & moisture. These pumps drain standing water down to 3/8 inches depth, for dewatering window wells, basements, ponds, stock tanks & rooftops. They are equipped with double ball bearings to bear radial & axial loads in both directions, and are available in cord lengths of 10 & 20 feet.

Style	Model	GPM of Water @ 25 Ft. of Head	Amps	Base Material	GPM of Water @ 30 Ft. of Head	GPM of Water @ 5 Ft. of Head	Height	Housing	Housing Material	Price (inc. VAT)
A	3YU54	-	1.5 AC	Polypropylene	-	16.7	10.5"	Polypropylene	Polypropylene	£134.81
A	3YU55	-	2.6 AC	Polypropylene	-	32.9	10.5"	Polypropylene	Polypropylene	£181.02
B	1XHV4	27	4.7 AC	304 SS	13	74	16 5/16"	Stainless Steel	Stainless Steel	£793.33
B	1XHV5	53	11.3 AC	304 SS	45	90	18.125"	Stainless Steel	Stainless Steel	£1,329.26

TSURUMI -

Automatic Submersible Dewatering Pump

Style	Model	GPM of Water @ 30 Ft. of Head	Amps	Cord Length	GPM of Water @ 5 Ft. of Head	Height	HP	Length	Maximum Head	Price (inc. VAT)
A	LB-480A	23	6.1	32ft.	62	11.25"	2/3	11.25"	39.5 ft.	£928.02
B	LB-800A	53	9.6	50ft.	82	13.437"	1	13.437"	59 ft.	£1,443.42

TSURUMI -

Construction Site/Residential Dewatering Pump

Style	Model	GPM of Water @ 20 Ft. of Head	Amps	Base Material	GPM of Water @ 25 Ft. of Head	GPM of Water @ 30 Ft. of Head	GPM of Water @ 40 Ft. of Head	GPM of Water @ 5 Ft. of Head	Height	Price (inc. VAT)
A	HS2.4S-62	35	5.4 AC	PVC	28	20	-	53	12 15/16"	£531.74
B	HSZ2.4S-62	35	5.4 AC	PVC	28	20	-	53	15.125"	£628.77
C	HSD2.55S-62	40	7.5	Steel	33	25	8	58	15.375"	£1,171.64
D	LSR2.4S-60	44	6.1	Rubber	34	24	-	62	11.375"	£826.93
E	LB-480	44	6.1	Steel	36	23	-	62	11.25"	£697.69
F	HS3.75S-62	55	9.6	PVC	51	46	35	60	15.25"	£1,034.08
G	HSZ3.75S-61	55	9.6	PVC	51	46	35	60	17.5"	£1,075.51
H	NK2-22	114	13	Steel	110	104	92	130	24.5"	£3,770.11
I	NK2-22L	180	13	Steel	170	152	120	211	26.5"	£4,567.22

LITTLE GIANT PUMPS -

Submersible Sump Pumps, Ball Bearings, 20 Feet Cord Length
Little Giant submersible sump pumps are designed for removing standing / accumulated water from a sump basin in the basement or crawl space and transfer water to the sewer line. These units come with stainless steel housing for handling corrosive fluids and semi-open impeller design for handling liquids with solid particles. They are completely submerged underwater and start operating the motor automatically when the sump pit water rises to an emergency level and stops the pump when the water has drained down to normal level. Choose from a wide range of these submersible sump pumps, available in 12 and 14 inch heights.

Style	Model	GPM of Water @ 30 Ft. of Head	Amps	Cord Size	GPM of Water @ 5 Ft. of Head	Handle	Height	HP	Impeller Material	Price (inc. VAT)
A	620240	22	5 AC	16/3	58	Thermoplastic	12"	1/2	Rubber	£825.04
B	620241	54	10 AC	14/3	80	Stainless Steel	14"	1	Ductile Iron	£1,038.44

TSURUMI -

Style	Model	GPM of Water @ 30 Ft. of Head	Amps	Cord Size	GPM of Water @ 40 Ft. of Head	GPM of Water @ 5 Ft. of Head	Height	HP	Impeller Material	Price (inc. VAT)
A	LB-800	53	9.6	14/3	37	82	13.437"	1	Urethane Rubber	£1,098.70
B	LB-1500	84	26.2	12/3	70	111	23 5/16"	2	High Chrome	£3,307.75

Style	Model	Price (inc. VAT)
A	555110	£247.69	RFQ
B	555111	£317.35	RFQ
A	555113	£259.87	RFQ
B	555203	£230.91	RFQ
A	555112	£237.37	RFQ
C	555602	£220.59	RFQ

Style	Model	Motor Type	Body Material	GPM of Water @ 10 Ft. of Head	RPM	Shaft Material	Type	Voltage	GPM of Water @ 5 Ft. of Head	Price (inc. VAT)
A	4LA43	-	-	-	-	-	-	-	-	£1,831.81	RFQ
A	4LA45	-	-	-	-	-	-	-	-	£1,312.65	RFQ
B	5UXL8	DC	Nickel-Plated Brass	3.32	5000	Stainless Steel	Compact Flexible Impeller	12 VDC	3.72	£144.25
B	5UXN0	DC	Stainless Steel	3.32	5000	Stainless Steel	Compact Flexible Impeller	12 VDC	3.72	£215.20
C	2VAN7	PSC	-	22	3450	Buna N	Sensor Utility	115	30	£211.69

Style	Model	Item	Amps	Cord Length	Length	Maximum Head	Shaft Material	Switch Type	Width	Price (inc. VAT)
A	505350	Pump	5	18ft.	7 45/64"	-	-	Piggyback	4 19/64"	£257.71
B	505300	Pump	-	10ft.	-	-	-	-	-	£231.23
C	505400	Submersible Utility Pump	5 AC	10ft.	6.125"	26.3 ft.	Stainless Steel	Float	4 5/16"	£218.00
D	505176	Utility Pump	5 AC	18ft.	6 1/16"	26 ft.	Viton	Manual	4 5/16"	£168.80

Style	Model	Price (inc. VAT)
A	505712	£264.49	RFQ
B	505715	£379.56	RFQ
C	505723	£262.48	RFQ
A	505714	£313.59	RFQ

Style	Model	Housing Material	Amps	GPM of Water @ 10 Ft. of Head	Impeller Material	Max. Liquid Temp.	Motor Type	RPM	Shaft Material	Price (inc. VAT)
A	314-0002	Cast iron	8.0	22.5	Thermoplastic	120 F	AC	6000	Carbon Ceramic	£619.59
B	46-0005	Plastic	6 AC	47	Plastic	104 Degrees F	PSC	3450	Stainless Steel	£534.96

Style	Model	Price (inc. VAT)
A	556501	£292.82	RFQ
B	556001	£96.75	RFQ

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Style	Model	Price (inc. VAT)
A	9404-11	£324.33	RFQ
A	9404-21	£225.46	RFQ
A	9404-48	£209.70	RFQ

ALLEGRO SAFETY -

Hex Bolts
Allegro hex bolts are suitable for fastening components in sludge dewatering pumps used for wastewater transfer & dewatering applications. Their 304 stainless steel construction prevents highly abrasive environments from damaging / wearing the fastener. Selected models having washers are also available.

Style	Model	Item	Price (inc. VAT)
A	9404-42	Hex Bolt	£3.80	RFQ
A	9404-40	Hex Bolt	£17.75	RFQ
A	9404-27	Hex Bolt with Washer	£11.41	RFQ

PACKARD -

Submersible Dewatering Pump 15 Feet Cord Length

Model	Item	Price (inc. VAT)
SD300	AH9VAP	£982.37

DAYTON -

Sensor Utility Pump 1/4HP 120V 50 FeetCord

Model	Item	Price (inc. VAT)
40GT80	AH9LET	£240.11

ALLEGRO SAFETY -

Plain Washer

Model	Item	Price (inc. VAT)
9405-20	AG8FGK	£3.98	See Details

ALLEGRO SAFETY -

Mechanical Sleeve

Model	Item	Price (inc. VAT)
9405-41	AG8FGP	£334.84	See Details

ALLEGRO SAFETY -

Pump Casting

Model	Item	Price (inc. VAT)
9405-23	AG8FGN	£70.63	See Details

ALLEGRO SAFETY -

Suction Cover

Model	Item	Price (inc. VAT)
9405-22	AG8FGM	£201.55	See Details

12 3 4

Utility/Dewatering Pumps

Dewatering pumps are used to remove or draw groundwater from mines, basement and backyard, as well as reduce flooding by the method of centrifugation and level the water table. Raptor Supplies offers a wide range of these utility / dewatering pumps from brands like Allegro, Dayton, Little Giant Pumps, Tsurumi and Rule. These pumps feature an impeller which creates a vortex to suck the air out of the hose and, as a result, forces the water to rise to the pump with the help of atmospheric pressure. These horizontally installed pumps use electric motors with a maximum 3 HP power rating and come with a mechanical seal to prevent water ingress. These pumps are available in cord lengths ranging from 8 to 50 inches on Raptor Supplies.

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Utility/Dewatering Pumps

Dewatering Pumps

Automatic Submersible Dewatering Pump

Construction Site/Residential Dewatering Pump

Submersible Dewatering Pump

Pony Pumps

Utility Pumps

Dewatering/Utility Pumps

Utility Pumps

Utility Pumps

Utility Pump

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Submersible Dewatering Pump 15 Feet Cord Length

Sensor Utility Pump 1/4HP 120V 50 FeetCord

Plain Washer

Mechanical Sleeve

Pump Casting

Suction Cover

Utility/Dewatering Pumps

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Utility/Dewatering Pumps

Impellers Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.

Submersible Dewatering Pump 15 Feet Cord Length

Sensor Utility Pump 1/4HP 120V 50 FeetCord

Plain Washer

Mechanical Sleeve

Pump Casting

Suction Cover

Utility/Dewatering Pumps

Frequently Asked Questions

What maintenance is required for dewatering pumps?

Do these sludge submersible dewatering pumps offer motor protection?

In what cord lengths are these dewatering pumps available on Raptor Supplies?

What is the maximum liquid temperature permissible in dewatering pumps?

We are here to help!

Looking for a part not listed here?

Explore More

Impellers
Allegro impellers are replacements for worn out impellers in sludge, low water & dewatering pumps, used for underground mining & waste fluid removal / transfer applications. They have one piece design for minimising wear over prolonged & repeated usage.