Plate And Beam Lifting Clamps | Raptor Supplies United Kingdom

Plate And Beam Lifting Clamps

Filter

To load finished products into containers or load vehicles onto trailers, plate and beam lifting clamps are required in the construction & production industries. Beam clamps are suitable...Read more

DAYTON -

Plate Clamp

Dayton plate clamps are ideal for lifting metal plates / sheets and fragile equipment in manufacturing industries, without leaving any mark on the surfaces. These clamps feature a safety mechanism which ensures no clamp slipping, even under drastic loading / unloading conditions and can be used in both horizontal and vertical configurations. They are capable of lifting loads ranging from 660 to 3300 lb but can lift only one object at a time. The heavy-duty jaws of these clamps are made of hardened steel to ensure resistance against abrasion. Choose from a wide range of these plate clamps available in jaw opening widths ranging from 1/4 to 4 inches on Raptor Supplies.

StyleModelJaw CapacityPrice (inc. VAT)
A22NC011/4 to 2"£5,174.84
B22NC021/4 to 4"£2,939.31
RENFROE -

Plate and Beam Lifting Clamps

StyleModelPrice (inc. VAT)Pkg. Qty.
AHDR-06.00-A£3,983.002
BLHC-04.00-A£3,567.832
CLA-01.00-A£1,046.511
CLA-02.00-A£1,396.201
DLPA-03.00-A£2,452.081
AHDR-08.00-A£5,735.152
DLPA-02.00-A£2,069.881
BLHC-03.00-A£1,936.202
DLPA-00.50-A£1,299.711
DLPA-01.00-A£1,403.541
CLA-03.00-A£1,811.631
VESTIL -

CPC Series Vertical Plate Clamps with Chain

StyleModelOverall ThicknessBale OpeningJaw DepthOverall WidthPlate ThicknessThroat DepthWorking Load LimitMax. Compatible Plate ThicknessPrice (inc. VAT)
ACPC-101 1/4"2.25"1.25"1.97"0.6"1.25"0.5 ton.0.6"£340.21
BCPC-202 1/4"3"3"2.5"0.8"3"1 ton.0.8"£458.07
CCPC-802"5.25"3"4.75"1.1875"3"4 ton.1.88"£924.48
DCPC-402"3.75"3"2.75"1"3"2 ton.1"£598.69
VESTIL -

EPC Series Vertical Plate Clamps

StyleModelOverall ThicknessBale OpeningJaw DepthOverall WidthPlate ThicknessThroat DepthWorking Load LimitMax. Compatible Plate ThicknessPrice (inc. VAT)
AEPC-101.73"1 13/16"1.6"1.75"19/32"1.6"0.5 ton.0.6"£253.42
BEPC-402.56"2 3/8"2.9"2.69"1"2.9"2 ton.1"£564.41
CEPC-202.56"2 3/8"2.9"2.38"25/32"2.9"1 ton.0.8"£408.87
DEPC-803.54"2 3/8"3"4"1 3/16"3"3.3 ton.1.88"£845.96
VESTIL -

HPC Series Horizontal Plate Clamps

StyleModelOverall WidthBale OpeningMax. Compatible Plate ThicknessPlate ThicknessWorking Load LimitMax. Jaw OpeningOverall DepthOverall HeightPrice (inc. VAT)
AHPC-202.63"1 3/16"0.8125"0.8125"1 ton.1.1875"6.0625"7.94"£264.89
BHPC-403"1.2"1.25"1.25"2 ton.1.2"7"8.5"£309.21
CHPC-803"1.2"1.38"1.38"4 ton.1.2"7.25"10.25"£407.21
DHPC-1007.25"1.2"1.4375"1.4375"5 ton.1.2"2.5"10.5"£719.98
VESTIL -

LPC Series Positive Locking Plate Clamps

StyleModelOverall ThicknessBale OpeningJaw DepthOverall WidthPlate ThicknessThroat DepthWorking Load LimitMax. Compatible Plate ThicknessPrice (inc. VAT)
ALPC-202.5625"1.75"2.3"3"0.80"2.3"1 ton.0.80"£477.77
BLPC-403.13"2.2"2.95"3.5"1.1875"2.95"2 ton.1.1875"£587.24
CLPC-603.5625"1.9"3.34"4"1.5625"3.34"3 ton.1.5625"£734.55
OZ LIFTING PRODUCTS -

Plate and Beam Lifting Clamps

StyleModelPrice (inc. VAT)
AOZSS1BC£487.85
BOZ2BCA£251.60
COZ1BCA£236.87
DOZ3BCA£363.23
EOZ10BCA£688.23
FOZ5BCA£443.46
GOZSS2BC£583.35
ALL MATERIAL HANDLING -

PCU Series Plate Lifting Clamp

StyleModelCapacityJaw OpeningPrice (inc. VAT)
APCUA0051100 lbs.5/8"£336.00
APCUA0102200 lbs.3/4"£434.18
APCUA0204400 lbs.1"£531.60
APCUA0306600 lbs.1-1/8"£612.17
APCUA05011000 lbs.2"£745.09
TOPAL -

Plate and Beam Lifting Clamps

StyleModelItemPrice (inc. VAT)
ANXR05 0-120Nonmarring Plate Clamp£2,222.58
ANXR05 40-140Nonmarring Plate Clamp£2,253.08
BNX1.5 0-30Nonmarring Plate Clamp£2,154.11
BNX05 0-20Nonmarring Plate Clamp£1,404.48
CNK1 20-40Plate Clamp£1,941.26
CNK3 0-40Plate Clamp£3,735.77
CNK2 0-30Plate Clamp£2,129.94
DKS075 0-15Plate Clamp£509.54
VESTIL -

NMPC Series Non-Marring Plate Clamps

StyleModelCapacityMax. Jaw OpeningMin. Jaw OpeningOverall DepthOverall HeightOverall WidthPrice (inc. VAT)
ANMPC-11-51100 lbs.5 1/2"1 9/16"8"8"5"£5,236.28
BNMPC-11-31100 lbs.3 15/16"0"7"10"12.13"£4,458.89
CNMPC-11-41100 lbs.4 1/4"13/16"6"10"5"£5,044.84
DNMPC-111100 lbs.13/16"0"6"8"8.7"£3,030.52
ENMPC-333300 lbs.1 1/8"0"7"10"5"£4,854.92
VESTIL -

BC Series Beam Clamps

Vestil beam clamps are suitable for distributing load away from flange edges, for reducing I-beam flange stress during overhead lifting operations. They have a mechanical adjustment system for quickly swapping the clamp from one gantry to another and an integrated, bottom mounted bar for hoist attachment. These steel beam clamps feature a painted finish for protection against fluids & abrasive environments. Choose from a broad range of these beam clamps, available in load capacities ranging from 1000 to 10000 lb on Raptor Supplies.

StyleModelMin. Jaw OpeningCapacityColorOverall DepthOverall HeightOverall LengthOverall WidthWorking Load LimitPrice (inc. VAT)
ABC-60"6000 lbs.Orange20.25"7.75"20.25"5.25"3 ton.£230.68
BBC-12 1/2"1000 lbs.Orange16.5"6.25"16.5"3.5"0.5 ton.£106.28
CBC-22 1/2"2000 lbs.Orange16.5"6.25"16.5"3.5"1 ton.£124.23
DBC-42 1/2"4000 lbs.Orange16"6.5"16"4"2 ton.£140.66
EBC-84 1/2"8000 lbs.Blue21.25"7.75"21.25"5.25"4 ton.£281.35
FBC-104 1/2"10000 lbs.Blue21.25"7.75"21.25"5.25"5 ton.£325.61
ALL MATERIAL HANDLING -

PCH Series Plate Lifting Clamp

StyleModelCapacityJaw OpeningPrice (inc. VAT)
APCH0051100 lbs.1-3/8"£121.59
APCH0102200 lbs.2-3/8"£148.45
APCH0204400 lbs.2-3/8"£197.93
APCH0306600 lbs.2-3/8"£258.72
APCH05011000 lbs.2-3/8"£311.04
APPROVED VENDOR -

Beam Clamp

StyleModelLengthMaterialMax. LoadPipe SizeRod SizeTypeWidthPrice (inc. VAT)
A22FP82-Electro Galvanized Steel1200 Lb.-1/4"Channel to Beam-£13.47
B22FP792"Electro Galvanized Malleable Iron810 Lb.8"1/2"MSS SP-58(Type 19)1.7"£5.75
C22FP812.2"Electro Galvanized Malleable Iron400 Lb.4"3/8"MSS SP-58(Type 23)2"£4.98
RENFROE -

Plate Clamp

StyleModelJaw CapacityLocking TypeOperationPrice (inc. VAT)
AFR-02.00-A0 to 1"Lock ClosedVertical Only Lifting£1,501.47
BJPA-02.00-A0 to 1"Load ActivatedVertical Lift with Side Pull£2,446.61
CDWS-01.50-A0 to 1"Lock ClosedHorizontal Lift£3,721.88
DLJ-02.00-A0 to 1"Lock ClosedVertical and 90 Lifting£1,525.50
EHR-00.25-A0 to 1"NonlockingHorizontal Lift£1,206.20
CDWS-03.00-A0 to 1-1/4"Lock ClosedHorizontal Lift£4,466.51
DLJ-03.00-A0 to 1-1/4"Lock ClosedVertical and 90 Lifting£1,672.32
FSCPA-01.50-A0 to 1-1/4"Locking ScrewVertical Lift with Side Pull£1,667.55
AFR-03.00-A0 to 1-1/4"Lock ClosedVertical Only Lifting£1,496.12
CDWS-00.25-A0 to 1/2"Lock ClosedHorizontal Lift£2,130.86
EHR-00.75-A0 to 2"NonlockingHorizontal Lift£1,864.62
FSCPA-03.00-A0 to 2"Locking ScrewVertical Lift with Side Pull£2,127.02
EHR-00.50-A0 to 2"NonlockingHorizontal Lift£1,309.13
EHR-01.50-A0 to 2"NonlockingHorizontal Lift£1,914.92
DLJ-00.50-A0 to 3/4"Lock ClosedVertical and 90 Lifting£751.83
AFR-01.00-A0 to 3/4"Lock ClosedVertical Only Lifting£984.95
DLJ-01.00-A0 to 3/4"Lock ClosedVertical and 90 Lifting£1,052.97
FSCPA-00.50-A0 to 3/4"Locking ScrewVertical Lift with Side Pull£1,382.60
BJPA-01.00-A0 to 3/4"Load ActivatedVertical Lift with Side Pull£1,899.30
CDWS-00.50-A0 to 3/4"Lock ClosedHorizontal Lift£2,451.53
AFR-00.50-A0 to 3/4"Lock ClosedVertical Only Lifting£728.72
BJPA-00.50-A0 to 5/8"Load ActivatedVertical Lift with Side Pull£2,346.18
CALDWELL -

Beam Flange Clamp

StyleModelJaw CapacityPrice (inc. VAT)
ABFC-23 to 7-1/2"£543.72
ABFC-13 to 7-1/2"£543.32
ABFC-36 to 12"£673.40
ABFC-56 to 12"£788.13
ABFC-106 to 13-1/4"£1,138.47
RENFROE -

Beam Clamp

StyleModelJaw CapacityPrice (inc. VAT)
ABC-03.00-A3 to 7-1/2"£1,235.21
ABC-01.50-A3 to 7-1/2"£1,215.38
ABC-05.00-A6 to 10"£1,934.88
CALDWELL -

Beam Web Clamp

StyleModelJaw CapacityPrice (inc. VAT)
ABWC-56" to 12"£2,843.90
ABWC-106" to 12"£3,312.50
ABWC-10W9" to 15-3/4"£4,089.72
CALDWELL -

Sheet Lifter

StyleModelCapacityHeadroomPrice (inc. VAT)
A60-5-7210,000 lb.29"£26,273.82
RFQ
A60-5-6010,000 lb.29"£25,188.45
RFQ
A60-10-7220,000 lb.30"£29,898.50
RFQ
A60-3-726000 lb.28"£24,778.88
RFQ
A60-3-606000 lb.28"£23,283.96
RFQ
DAYTON -

Beam Clamps, Vertical Lift

Dayton beam clamps provide a permanent or temporary mount to flat or tapered I-beams. These ASME standard beam clamps decrease I-beam stress by applying load inside the flange edge . These beam clamps come with a suspension bar and are available in 1, 2, 3 and 5 ton jaw capacity variants.

StyleModelJaw CapacityPrice (inc. VAT)
A3KR111 ton£156.15
A3KR122 ton£201.27
B3KR133 ton£230.13
B4ZW255 ton£308.90
TRACTEL -

Plate Clamp

Tractel plate clamps are designed to lift and transport plates, steel frames, profiles and fabricated assemblies, with no additional requirement of special tools. These plate clamps feature a permanently attached chain sling, with a large oval suspension ring, for handling heavy and abrasive loads up to 6600 lb and an automatic locking design, with a stainless steel spring mechanism, for added security. Choose from a wide range of these impact and wear resistant plate clamps, available in fully flexible clamping capacities ranging from 3/4 to 3-1/2 inches on Raptor Supplies.

StyleModelJaw CapacityPrice (inc. VAT)
ANK1 40-602-5/16"£2,067.99
ANK2 30-602-5/16"£2,768.48
ANK3 40-803"£3,896.81
ANK2 60-903.5"£2,963.55
ANK5 50-1003.875"£6,692.22
ANK1 0-203/4"£1,220.49
BKS1 0-203/4"£709.46
BKS2 0-2515/16"£774.20
TRACTEL -

Beam Clamp

StyleModelJaw CapacityPrice (inc. VAT)
ACC070199"£181.58
ALT 1B9.5"£170.28
ACC0702913.25"£257.09
ALT 10B13.75"£508.13
12

Plate And Beam Lifting Clamps

Plate and beam lifting clamps are used for moving, transferring, lifting and suspending heavy items. These lifting gears can be used for both vertical & horizontal lifting, without leaving marks on the attached material. Raptor Supplies offers a wide variety of beam and plate clamps, non-marring plate clamps, web and beam flange clamps, locking turning clamps and sheet lifters, from Vestil, Caldwell, Renfroe, Tractel and Dayton. These electro-galvanised, malleable iron / steel plate & beam clamps are available in load capacities ranging from 6000 to 20000 lb.
Vestil beam clamps minimise I-beam flange stress by distributing loads away from the flange edges during lifting. These solid steel plate lifting clamps are designed for exceptional strength and come with a bar located at the bottom to easily connect to a hoist. They can be interchanged from one gantry to another via their mechanical adjustment mechanism.
Renfroe plate clamps are vertical lifting clamps ideal for relatively light duty operations. They come with a Lock Closed feature which allows attaching the clamp to the plate, and a safety mechanism which ensures that the clamp does not slip when lifting force is applied. They are 300% overload factory tested for added protection and feature a compact design ideal for tight spaces.

Uses

These sheet metal lifting clamps and beam clamps offer a wide combination of features, making them useful for heavy duty applications in the mining, transportation, construction and steel industries.

Features

Caldwell Sheet Metal Lifting Clamps:

  • Caldwell sheet metal lifters have top lifting shackles and two load shackles having a maximum lifting capacity of 20000 lb.
  • Beam web clamps from Caldwell are designed for side load applications and have jaw capacities ranging from 6 to 15-3/4 inches.
  • The portable and lightweight beam flange clamps come with lock nuts to prevent inadvertent loosening of the units, and have built in suspension pins to ensure low headroom for easy handling of loads.

Vestil Plate Lifting Clamps:

  • Vestil beam clamps have a mechanical adjustment system for quickly swapping the clamp from one gantry to another, and an integrated, bottom mounted bar for hoist attachment. These steel beam clamps feature painted finish for protection against fluids & abrasive environments.
  • The vertical plate clamps are integrated with jaws to lift sheet metal or steel plates and provide a strong grip.
  • They feature a drop-forged steel case for optimum strength, and automatic serrated hardened steel cams & pads for locking the plate in place.
  • The brand's CPC Series plate clamps feature a lifting shackle, teeth within the jaws, a chain, a spring and pins / links to grab the plate with utmost strength, thereby eliminating the need to drill or hitch.
  • Non-marring marble lifting clamps have polyurethane coated jaws to prevent scratching and automatic clamping mechanism for minimising operation time. These plate clamps feature an oval suspension ring for securely hanging onto machinery.

Renfroe Beam and Plate Clamps:

  • These clamps are equipped with a safety mechanism for ensuring that the clamp does not slip when load is being lowered and lifting force is applied.

Dayton Plate and Beam Clamps:

  • Dayton plate clamps have a safety mechanism which ensures no clamp slipping, even under drastic loading / unloading conditions. They can be used in both horizontal and vertical configurations.
  • They are capable of lifting loads ranging from 660 to 3300 lb, but can lift only one object at a time.
  • These forged horizontal or vertical lifting clamps have heavy-duty jaws made of hardened steel to ensure resistance against abrasion.

Working Mechanism

These lifting clamps for plates or beams feature handgrips and lifting gears that enable them to manage, lift & turn heavy loads horizontally or vertically, in multiple directions, with ease and safety. They have jaw capacities up to 13.75 inches for a perfect grip.

Standards and Approvals

  • Caldwell lifting solutions are designed in compliance with ASME certifications and BTH standards for ensuring safety.
  • Renfroe clamps are 300% overload factory tested.
  • Vestil's lifting product catalogue features ASME certifications to guarantee safe and efficient use.

Frequently Asked Questions

Are there any payment options other than cards?

Raptor Supplies offers you to pay securely via PayPal as well.

What if I have any query regarding the product or its delivery?

You can easily get your queries resolved by contacting us through -
Email: sales@raptorsupplies.com
Call: +44 203 287 5224
WhatsApp: +44 7786 311597

How many plates can be lifted via a plate grab?

A plate lifting clamp should only be used to carry or lift a single plate at a time. However, the only exception to this plate lifting rule is that you need to distribute the weight, by lifting a stack of plates horizontally, using two or four clamps.

We are here to help!

Looking for a part not listed here?