Used in combination with air curtain cabinets to provide a wall of continuously flowing air that prevents the escape of hot or cold air and also reduces humidity. Available in motor speeds up to 3450 rpm
Designed for use with open-refrigerated display cabinets to protect motor / blower assemblies. Come pre-wired with a molded cord / plug assembly for easy installation
Dayton air curtains are designed for creating a thermal barrier by projecting a high-flow air stream on doorways of hospitals, schools, post offices and retail stores and also for walk-in coolers & pass-through food service windows. These air curtains feature steel housing and totally enclosed motors for resistance against dust, airborne contaminants and harsh outside environment. These single phase motors offer air throw spanning up to 8 feet. Dayton air curtains have compact construction for easy mounting on places with tight tolerances. A broad range of these Dayton air curtains is available in 25 to 60 inch wide variants on Raptor Supplies, an authorised Dayton distributor.
Used in laboratory or restaurant exhaust systems as well as in industrial ventilation systems. Feature heavy-duty construction for enhanced service life. Integrated with non overloading, dynamically balanced wheels providing full Class 1 clockwise rotation. Available in 1 to 20 hp variants
Include inlet / outlet guards and drain blower housing for replacing worn bearings and drive shafts. Zinc plated / polyester urethane / gray baked on polyester epoxy powder coated finish for tear & rust resistance. Offered in outside diameters ranging from 4 to 39 inches
Suitable for various indoor, clean air applications in industrial or commercial buildings having confined spaces. Feature collars for simplification of duct connections and provide speeds ranging from 384 to 1396 rpm. Available in single & three phase configurations
Designed for use in ventilation, exhausting, heating, cooling, drying and humidifying applications. Integrated with ball bearings for less motor friction and to resist lubricant leakage. Deliver speeds up to 860 rpm and are offered in 1 to 25 hp variants
AMCA approved blowers ideal for air conditioning and heating systems requiring low to medium pressures. Feature housing made of galvanised steel to resist corrosion and are capable of withstanding ambient temperatures up to 104 degrees F. Available in 0.75 & 1 inch shaft diameters
Forward-curve, belt-drive blowers featuring dynamically balanced wheels and prelubricated sealed ball bearings with rubber isolators for durability and continuous use. Extensively used in air conditioning and fan coil units, evaporative condensers and cooling towers
Designed to deliver the greatest air volume in relation to the size and speed of the blower; widely used in high-flow industrial applications
Integrated with ball bearings to handle commercial or industrial air moving applications. Deliver speeds ranging from 390 to 1450 rpm. Feature housing made of galvanised steel for resistance against corrosion and are available in 1 to 7.5 hp variants
Include outlet guards, flexible air ducts, fan blade pitch gauges and hub puller fan & wheels. Feature cast iron / steel / thermal plastic / polished stamped aluminium construction for high compression strength and knock & scratch resistance. Offered in 6.5 and 8 inch widths
Used in new & replacement installations for air conditioning, heating and ventilation systems for stabilising HVAC blowers. Compatible with forward-curved, direct-drive and double-inlet blowers
Ideal for applications including air conditioning, heating, ventilation and dehumidification in commercial and industrial applications. Feature steel construction with corrosive resistant finish for longer life and deliver high air volume with reduced vibrations for various air-moving applications
Feature galvanised steel housing to withstand ambient temperatures up to 104 degrees F and are reinforced to provide trouble-free service and optimal performance. Integrated with resilient pads for minimising vibrations while running, offered in 15.25 & 17.5 inch housing heights
Unassembled blowers designed for heating, air conditioning and ventilating applications. Feature sleeve bearings for excellent shock resistance and are integrated with resilient pads for vibration damping. Provide full load current ratings between 4 and 12.3A
Feature welded steel construction for structural rigidity and to resist oxidation on exposed surfaces. Grey epoxy coated housing for resistance from acids and harmful chemicals. Capable of withstanding ambient temperatures up to 104 degrees F
Used in conjunction with heat shields between motors and housing to help blowers to handle air inlet temperatures up to 500 degrees F. Feature aluminium construction for easy transportation and allow rotation of housing up to 8 discharge positions in every cycle
Ideal for cooling greenhouses and ventilation of small buildings, electrical enclosures and wood & corn stoves. Feature sleeve / ball bearing motors integrated with cast-aluminium end shields for more heat dissipation. Can be mounted in any position and operate with minimal vibration or noise
Well-suited for pressurised plenum and air handling applications. Feature steel / galvanised frame for structural rigidity while also resisting corrosion. Deliver a maximum speed of 3450 rpm and produce power up to 14.956 BHP. Integrated with ball bearings for less rotational friction
Used in furnaces, ovens, air curtains, wash systems and dust collectors for dry air circulation. Equipped with self-aligned ball bearings to prevent lubricant leakage and allow mounting in horizontal or vertical positions. Can be operated at a maximum temperature of 500 degrees F
Heavy-duty Dayton blowers are designed to generate high-flow air stream for quickly drying wet carpets, hard surface floors, upholstery, walls & ceilings, ventilation of work areas, smoke evacuation, mould remediation, storm damage clean-up and cooling applications in commercial settlements. These blowers feature a compact design with lightweight housing for portability and rugged construction for durability. Dayton portable blowers come equipped with 3 fan speed settings (Low / Med / High) and 3 operating positions. 5UMP Series blowers feature collapsible handle & rear wheels for additional job-site transportability and built-in outlets for connecting multiple units. 20VD Series blowers feature stainless steel construction for resistance against abrasive materials and telescopic transport handle for convenience. Choose from a broad range of these portable blowers, available in polyethylene and rubber casters on Raptor Supplies, an authorised Dayton distributor.
Designed for chemical processing, drying or cooling applications and used in furnace blowers, gas boosters & exhausters and pneumatic conveyors. Feature a self-cleaning wheel, making the blower suitable for small exhaust systems having grit or dust in the air. Offered in 1 to 50 hp variants
Well-suited for blowing high volume & high pressure air in chemical, clothing, aviation and automotive industries. Integrated with flat blades arranged radially to deliver air efficiently and offer long service life. Offered in blower speeds ranging between 1725 and 3475 rpm
UL/cUL listed duct blowers designed for horticultural, industrial and electronic ventilation such as health centres, offices and hotels. Feature steel housing with gray polyester finish to resist corrosion and self-aligned pillow block bearings for low drag & excellent smoothness
AMCA air, UL/cUL 762 compliant steel Dayton blowers with a grey polyester urethane finish and a spark-resistant aluminium wheel. Suitable for dry cleaning plants, petroleum dispensing areas, coal preparation facilities and other potentially explosive environments
Designed to clean indoor air and extensively used in commercial / industrial complexes with limited space. Feature a re-greasable / sealed pillow block bearing supplied with a bearing cover for longevity
Exhaust fans and light-traps suitable for use in barns or poultry houses. Feature galvanised steel intake and discharge guards to help withstand humid and corrosive environments
Equipped with galvanised steel blades for handling higher volumes of air at low static pressures. Deliver speeds ranging from 341 to 1352 rpm while producing powers up to 3.6 BHP. Feature TEAO / TEFC / TENV / ODP motor enclosures for cooling & protection of motor from dust or rain
Feature adjustable pulleys and variable pitches for ventilation in warehouses and factories. Equipped with sealed & regreasable, cast-pillow block bearings for minimising the friction and noise. Deliver flow rates ranging from 4105 to 69692 cfm and are offered in 5 & 6 blade options
Well-suited for light to medium duty ventilation in warehouses, factories, foundries and laundries. Deliver a maximum speed of 877 rpm and can be mounted either in horizontal or vertical positions. Capable of withstanding ambient temperatures up to 104 degrees F
Designed to keep bathrooms, offices, electrical cabinets, and server & storage rooms cool and well ventilated. Offer amperage ratings ranging from 0.34 to 10.5A. Feature galvanised steel frames for structural rigidity and provide maximum inlet temperature of 104 degrees F
Vertical-mount exhaust fans feature fibreglass frames for durability and are ideal for use in corrosive environments. Integrated with sealed ball bearings for low rotational friction and to prevent lubricant leakage. Offered in permanent split capacitor and shaded pole motor variants
Used in refrigeration & mining ventilation applications for expelling stale air and pulling fresh & clean air. Deliver flow rates up to 12363 cfm and offer both horizontal and vertical wall mounting options. Equipped with totally enclosed and air over motors having class B insulation
Provide noiseless ventilation in offices, schools, storage facilities and light manufacturing assembly areas. Integrated with ball / sleeve bearings for low rotational friction and to prevent lubricant leakage. Provide motor speeds up to 1750 rpm and are offered in 1/30 to 3/4 hp variants
Include heavy duty wall collars, intake guards, wall housing and weatherhood. Feature 16 / 18 / 20 gauge galvanised steel construction for durability & corrosion resistance. Wall collars designed for use with exhausts & supply propeller fans and feature internal flanges for mounting shutters
Designed for use with exhaust fans and feature steel frames with galvanised finish to reduce oxidation on exposed surfaces. Equipped with mounting bolts and a slotted motor base for accommodating 48 or 56 frame motors. Frames comprise deep venturi and 1 inch wide flanges
Protect equipment & employees working near belt-drive propellers and direct-drive fans. Feature an OSHA-compliant screen enclosing the motor drive side of fans completely. Constructed with galvanised steel for corrosion resistance and are offered in 16, 18 & 20 gauges
Used to remove smoke, fumes and heat from industries. Feature totally enclosed fan-cooled motor with steel frames to keep the motor windings clean, dry & cool. Deliver a maximum speed of 3450 rpm and include 90 degrees sheet metal exhaust elbows & 8 feet power cords
Equipped with ball / sleeve bearings to prevent lubricant leakage and provide smooth rotation with minimum friction. Feature stamped aluminium blades for corrosion resistance and are integrated with TEAO motors for cooling of windings. Can withstand ambient temperatures up to 104 degrees F
Ideal for ventilation of spaces having flammable or explosive dust, vapours and gases. Feature spark-resistant aluminium propellers and galvanised frames for protection against corrosion. Allow mounting in both vertical and horizontal directions and are offered in 1/6, 1/4, 1/3, 3/4 & 1/2 hp variants
Engineered for window or wall installations and are ideal for single room ventilation applications. Feature TEFC / TENV / TEAO / ODP motor enclosures for cooling & protection of motor from rain or dust. Offer both horizontal and vertical mounting options and are available in 1 & 3 phases
Ideal for low-pressure cooling and exhausting applications. Feature galvanised frames to withstand ambient temperatures up to 104 degrees F while also resisting corrosion. Operate on 60 Hz frequency and are integrated with ball bearings for low rotational friction. Available in 3 & 5 blade variants
Used in offices, factories, stores, shops, greenhouses and farm buildings for stale air removal. Feature stamped aluminium blades for low rotational inertia and feature satin chrome finish for increased hardness & corrosion resistance. Provide battery life up to 60000 cycles
Dayton upblast ventilators are designed to provide a stable stream of clean air for reduction in overall air conditioner strain, cooling attics, laboratories, preventing moisture & heat build-up and for exhaust ventilation from foundries, warehouses and manufacturing facilities. These exhaust vents feature heavy-gauge galvanised steel housing for resistance against harsh weather & industrial environment and come equipped with reinforced edges & bolted seams for additional strength. Dayton upblast ventilators feature die-formed galvanised steel drive frames that offer a rigid platform for drives, motors, bearings and shafts. The fabricated steel propellers of these vents have steeply pitched blades to ensure minimum noise levels, integral butterfly dampers prevent unwanted backdrafts and magnetic latches minimise damper flutter when these ventilators are not in use. Built-in lifting lugs and removable windbands allow easy installation and inspection, respectively.
Supplied with galvanised steel downblast exhaust fans that can also become supply fans. Suitable for providing steady exhaust of air under low / moderate static pressure environments
Roof-mounted ventilators designed to exhaust odours and foul air from industrial and commercial complexes. Generally used for short or average resistance duct work. Available in belt-type and drive-type variants
Dayton upblast ventilators are centrifugal belt-drive ventilators to exhaust fumes, grease-laden vapours, foul air and odours out of working spaces, schools and warehouses. These upblast ventilators have an aluminum windband welded to the base to give them a virtually leakproof design. Dayton's upblast ventilators feature internal steel support braces and a fully rolled windband to improve the rigidity of the ventilators for transport & installation. Their motors, drive frames and wheels are isolated from the mounting base by neoprene studs for reducing the overall noise. The motor compartment is isolated from polluted air and is cooled from the outside air pulled inside by the spinning of the wheel. Dayton's direct driven upblast ventilators are equipped with electronically commutated motor (ECM) technology, a variable speed motor and a potentiometer dial pre-mounted on the motor to control the speed of the ventilator, allow up to 80 per cent useable turndown and remove the need for speed control. A wide range of these Dayton upblast ventilators is available on Raptor Supplies, an authorised Dayton distributor.
Belt drive Dayton upblast ventilators are suitable for whisking away fumes, foul air, grease-laden vapours, odours and potentially hazardous particles from schools, kitchen hoods and various commercial facilities. These centrifugal ventilators feature motor compartments that are isolated from contaminated air and are cooled by fresh air pulled from the outside. Hazardous location upblast ventilators feature spun aluminium housing with rolled wind band for increased stability, backward-inclined centrifugal wheels to minimise interference with airflow and spark-resistant aluminium rub rings to eliminate contact between fan shaft & housing. Severe duty upblast ventilators feature centrifugal wheels with special polyester powder non-stick coating for easier grease removal. The Dayton upblast ventilators without drive package feature a drive frame, blower wheel and motor that are completely base plate isolated using independent neoprene studs for metal-to-metal contact elimination and reduced overall noise. They also feature base welded aluminium windbands for leak proof seal between the mounting surface and the ventilator. Choose from a broad range of these Dayton centrifugal roof vents, available in roof and wall mounting variants on Raptor Supplies, an authorised Dayton distributor.
Dayton electric baseboard heaters are used for warming hallways, offices and small rooms. These baseboard heaters have rugged steel construction with multiple knockouts on each end for durability and built-in cable clamps for mechanical support and include wiring pigtails & installation mounting guides. Dayton hydronic electric baseboard heaters feature a liquid-filled element which provides temperature swing minimisation and continuous heat delivery even after being turned off. Raptor Supplies is an authorised distributor of Dayton electric baseboard heaters.
Electric ceiling heaters from Dayton are designed for use as central heating systems in concealed spaces without taking up wall or floor space. These heavy-duty heaters feature built-in T-bar suspension clips for mounting (enables easy installation) the panels to suspended ceilings. They have a built-in auto reset thermal cutout to allow automatic shut-off and prevent overheating hazards. Selected models feature adjustable direction airflow to customise airflow according to a heating purpose. Dayton electric heaters come in recessed and surface mounting designs to ensure efficient operation and easy mounting on the ceiling. They are equipped with an automatic fan delay switch to push the remaining cool air out of the duct system after the compressor is shut off. Raptor Supplies offers a wide variety of these electric ceiling heaters from Dayton in heating capacities up to 17100 BtuH at 277 VAC.
Dayton electric heaters are cETLus certified for use as auxiliary or intermittent heat sources and are installed in concealed & plenum spaces and areas not readily accessible. These heaters feature an energy-efficient fan coil design and a single- / three-phase, semi-enclosed motor to deliver airflow up to 1000 cfm at 480 VAC. They have a built-in auto reset thermal cutout to allow automatic shut off & prevent overheating and an automatic fan delay switch to push the remaining cool air out of the duct system after the compressor is shut off. Dayton electric fan coil heaters come with a single-point panel for easy access to all serviceable parts. Choose from a host of electric heaters from Dayton, available in heating capacities up to 51195 BtuH on Raptor Supplies.
Dayton electric utility heaters are used as an auxiliary heat source for garages, warehouses, stores, factories, basements, workshops and service stations. These heaters feature an automatic fan delay function which prevents exposure to residual heat for higher comfort level and come with ceiling mounting brackets offering vertical / horizontal flow mounting positions. They also have a built-in thermostat with a thermal cutout to allow automatic shut off and protect against overheating. We also offer Dayton freeze protection heaters (with NEMA 12 control box construction to keep out dust & moisture) designed specifically for water closets, crawl spaces and concealed areas. Choose from a wide variety of these electric utility heaters from Dayton, available in a maximum heating capacity of 17065 BtuH on Raptor Supplies.
Dayton electric heaters are used to provide the maximum heat (without using much energy) to waiting rooms, lobbies and other large spaces requiring additional heat. These heaters can easily be mounted to a wall or on a surface to save space and provide reliable heat output. Some models are equipped with a built-in thermostat to maintain a consistent temperature. For added safety, the heaters feature a built-in power disconnect switch and a red alarm light that will illuminate if the heater has turned off due to overheating and prevent damage due to excessive heat. A huge selection of these Dayton electric heaters is available on Raptor Supplies, an authorised distributor of the brand.
Portable electric heaters from Dayton are primarily designed for temporary heating of buildings under construction, alteration or repair and keeping offices and rooms warm & comfortable in cold weather. Also called space heaters, they circulate the air in the room to gradually and continuously heat the space. These heating units can be conveniently positioned where they're required to supplement heat from a central heating system. Operating as a supplement to the central heating system, these efficient & quiet-running heaters feature front & rear screens and a high limit temperature switch on selected models for added safety. A wide range of Dayton electric heaters including portable baseboard heaters, heated rubber mats, fan-forced space heaters, electric oscillating pedestal heaters & portable salamander heaters is offered by Raptor Supplies, the brand's authorised distributor.
Door louvers allow fresh air to move freely between rooms, offices or closets while maintaining privacy and security. Feature strong metal construction along with inverted V-style blades at 45 degree angle which allows maximum air to pass through. Available in clear anodized and grey paint finish
Three-phase air cannons used for air-moving applications in factories, foundries and steel mills. Feature 3 / 4 tilting fan blades capable of delivering air flows up to 16100 cfm
Installation accessories, such as ceiling mount brackets, rocker switches, floor pedestals, misting hub kits and wall brackets, designed for use with air circulators
Close-mesh steel wire guards available for propeller diameters ranging from 16 to 36 inches. Feature a rear-section design with 4 mounting slots to accommodate motor thru-bolts
Stationary and mobile air circulators capable of delivering air flows up to 21000 cfm. Feature steel / aluminium blades with a powder-coated finish to resist corrosion and offered in wall and pedestal mounting options
Dayton axial fans are commonly used for cooling in compact spaces including cabinets, electronic instruments, copy machines and computers. For wear reduction & damage protection, these fans monitor temperature by discharging hot air and allowing cool air inside the enclosure. Dayton axial fans are generally placed near heat generating power sources & motors, allow both horizontal & vertical mounting and are equipped with ball bearings for reducing rotational friction & protecting the enclosure from dust particles. Raptor Supplies is an authorised Dayton distributor hosting a huge selection of these axial fans with auto & impedance thermal protection and speeds ranging from 1400 to 3200 rpm.