Knockout Hole Punches | Raptor Supplies United Kingdom

Knockout Hole Punches

Filter

Knockout hole punches are designed to punch a hole through mild steel, sheet metal, aluminium, fibreglass and plastic surfaces. Raptor Supplies offers a wide range of these knockout hole...Read more

GREENLEE -

Knockout Punchs

StyleModelHole SizeItemPrice (inc. VAT)
A745H-2-1/2-Knockout Punch Set£924.20
B745H-3-Knockout Punch Set£988.22
CK2PM-0305-Knockout Punch£88.07
DK2P-1-1/4-B-Knockout Punch£100.86
E745H-4-Knockout Punch Set£1,490.67
FK2P-3/4-Knockout Punch£77.01
G745H-3-1/2-Knockout Punch Set£1,360.43
HK2P-2-B-Knockout Punch£155.27
IK2P-1-B-Knockout Punch£75.39
J351781"Knockout Punch£148.56
J067271/2"Knockout Punch£138.51
GREENLEE -

Punchs

StyleModelFunctionHole SizePrice (inc. VAT)
A7212SP-3/4PFor Punching Holes in Mild Steel, Aluminum, Fiberglass or Plastic3/4"£83.24
B7212SP-2PFor Punching Holes in Mild Steel, Aluminum, Fiberglass or Plastic2"£231.59
C7212SP-1PFor Punching Holes in Mild Steel, Aluminum, Fiberglass or Plastic1"£97.83
D724Manually Punches Hole and Rolls Edges Over-£297.23
MILWAUKEE -

Knockout Punch Exact Line

StyleModelHole SizePrice (inc. VAT)
A49-16-26651-3/8"£93.96
B49-16-26631-7/64"£74.70
C49-16-26671-47/64"£117.96
D49-16-26691-63/64"£140.97
E49-16-26712-15/32"£184.32
F49-16-26732-31/32"£212.55
G49-16-26753.593£366.81
H49-16-26774-1/8"£456.32
I49-16-26794-41/64"£572.21
J49-16-26617/8"£58.73
K49-16-2661S7/8"£58.26
MILWAUKEE -

Knockout Draw Stud Exact Line

StyleModelPrice (inc. VAT)
A49-16-2622£66.66
B49-16-2681£67.76
C49-16-2621£69.05
D49-16-2680£68.42
E49-16-2682£68.06
MILWAUKEE -

Knockout Die Exact Line

StyleModelHole SizePrice (inc. VAT)
A49-16-26641-3/8"£53.42
B49-16-26621-7/64"£43.49
C49-16-26661-47/64"£74.04
D49-16-26681-63/64"£92.88
E49-16-26702-15/32"£125.33
F49-16-26722-31/32"£161.76
G49-16-26743.593£236.13
H49-16-26764-1/8"£388.65
I49-16-26784-41/64"£447.39
J49-16-2660S7/8"£38.18
K49-16-26607/8"£40.05
GREENLEE -

Punches, D Shaped

Greenlee D-shaped punches are used with manual wrenches or hydraulic drivers for installation of switches or instruments. They feature centring marks for hole alignment and are available in hole sizes of 0.625 x 0.594, 0.75 x 0.703, and 0.769 x 0.642 inches.

StyleModelHole SizeTypePrice (inc. VAT)
A610800.625 x 0.594"D-Shaped£704.78
A610830.750 x 0.703"D-Shaped£721.44
A610860.769 x 0.642"Double D-Shaped£686.19
KLEIN TOOLS -

Knockout Dies

StyleModelPrice (inc. VAT)
A53820£29.67
B53868£83.61
C53828£34.14
A53820£25.47
D53838£36.37
E53850£40.91
D53838£29.55
GREENLEE -

Round Knockout Punchs

StyleModelHole SizePrice (inc. VAT)
A730BB-3/43/4"£157.16
B745H-1/27/8"£466.17
COUNCIL TOOL -

Back-Out Punchs

StyleModelHole SizePrice (inc. VAT)
ABO1001"£108.60
BBO5001/2"£95.28
CBO7503/4"£99.77
CBO6255/8"£98.12
CBO8757/8"£103.61
ECLIPSE -

Knockout Punch and Die Kits

StyleModelHole SizePrice (inc. VAT)
A902-490-£61.23
B902-485-£24.47
B902-487-£32.64
A902-488-£40.80
C902-4861-7/64£28.59
D902-4891-61/64£51.00
GREENLEE -

Knockout Punches

Greenlee knockout punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These knockouts are suitable for use with hydraulic & battery powered drivers and feature carbon alloy steel construction for minimising wear over repeated usage. They are nickel plated for high abrasion resistance and selected models feature No-Thread punch design for eliminating chances of cross threading. Choose from a wide range of these knockout punches, available in 7/8, 1-7/32, 2-7/8, 3-1/2, 4-1/2 & 4 inch hole sizes.

StyleModelHole SizeItemUse WithPrice (inc. VAT)
A737BB-Kit-£528.56
B745H-2-Knockout Punch-£1,041.14
C231-Knockout Punch-£1,626.63
D730BB-1-1/2-Knockout Punch-£227.39
E7212SP-1-7/32P1-7/32"Knockout PunchMfr. No. 7212SP-1-7/32D, 7212SP11, LS50L or Hydraulic Ram£99.68
F7212SP-2-1/2P2-7/8"Knockout PunchMfr. No. 7212SP-2-1/2D, 7212SP11, LS50L or Hydraulic Ram£258.44
G7212SP-3P3-1/2"Knockout PunchMfr. No. 7212SP-3D, 7212SP11, LS50L or Hydraulic Ram£378.23
H7212SP-1/2P7/8"Knockout PunchMfr. No. 7212SP-1/2D, 7212SP14, LS50L or Hydraulic Ram£66.66
GREENLEE -

Square Knockout Punchs

StyleModelHole SizeTypeUse WithPrice (inc. VAT)
A600161"Square Hole PunchManual Wrench or Hydraulic Driver£860.46
B600191-13/16"Hydraulic Drives OnlyHydraulic Drives Only£2,376.87
A600011/2"Square Hole PunchManual Wrench or Hydraulic Driver£648.00
A610073/4"Square Hole PunchManual Wrench or Hydraulic Driver£682.01
GREENLEE -

Knockout Dies

Greenlee knockout dies are used with punches for punching conduit size holes in fibreglass, aluminium, mild steel and plastic workpieces. These dies are suitable for use with hydraulic & battery powered drivers and feature simple, one piece design that enables quick setup & disassembly. Choose from a wide range of these knockout dies, available in 7/8, 1-7/32, 2-7/8, 3-1/2 & 4 inch hole sizes.

StyleModelHole SizeUse WithPrice (inc. VAT)
A7212SP-1-7/32D1-7/32"Mfr. No. 7212SP-1-7/32P, 7212SP11, LS50L or Hydraulic Ram£67.10
B7212SP-2-1/2D2-7/8"Mfr. No. 7212SP-2-1/2P, 7212SP11, LS50L or Hydraulic Ram£190.59
C7212SP-3D3-1/2"Mfr. No. 7212SP-3P, 7212SP11, LS50L or Hydraulic Ram£267.33
D7212SP-4D4"Mfr. No. 7212SP-4P, 7212SP11, LS50L or Hydraulic Ram£547.13
E7212SP-1/2D7/8"Mfr. No. 7212SP-1/2P, 7212SP14, LS50L or Hydraulic Ram£35.37
KLEIN TOOLS -

Knockout Punch

StyleModelItemPrice (inc. VAT)
A53819Knockout Punch£56.64
B53857Knockout Punch£103.85
C53867Knockout Punch£130.79
D53837Knockout Punch£70.11
E53849Knockout Punch£81.35
F53858Knockout Punch£67.85
G53827Knockout Punch£62.24
H53728SENKnockout Punch Set£94.85
I53727SENKnockout Punch Set£123.62
J53732SENKnockout Punch Set£629.54
SOUTHWIRE COMPANY -

Knockout Punch

StyleModelDepthHeightWidthPrice (inc. VAT)
A582978408.5"3.125"9.75"-
RFQ
B582979409"1.75"3.62"£7.20
C582980409"1.75"3.62"£7.20
GREENLEE -

Speed Punches, 10 Gauge

Greenlee 10 gauge speed punches are ideal for punching holes in aluminium, fibreglass, mild steel or plastic workpieces. These punches feature a no-thread punch design to prevent cross-threading and an innovative SPEED LOCK mechanism for securing punches in place. They allow up to 3 times faster setup & disassembly, and are available in hole sizes of 1-1/2 & 1-1/4 inches.

StyleModelHole SizePrice (inc. VAT)
A7212SP-1-1/2P1-1/2"£174.33
B7212SP-1-1/4P1-1/4"£140.22
GREENLEE -

Draw Studs, 3/4 Inch, 10 Gauge

Greenlee draw studs are ideal for punching holes in mild steel, aluminium, fibreglass or plastic workpieces. These 3/4 inch, 10 gauge studs feature a no-thread punch design to eliminate cross-threading and an innovative SPEED LOCK mechanism to quickly secure punches in place. They allow up to 3 times faster setup & disassembly, and are made of carbon steel having black oxide finish for corrosion resistance.

StyleModelPrice (inc. VAT)
A7212SP11£126.24
A7212SP12£131.45
GREENLEE -

Drawstud 10 Gauge Center Bolt

StyleModelTypePrice (inc. VAT)
A7212SP14Knockout Punch£106.08
B7212SP13Long£93.77
StyleModelHole SizeNumber of PinsPrice (inc. VAT)
A2290.787 x 0.982 x 0.469"9£1,677.68
ARS2321.655 x 1.853 x 0.469"25£1,707.74
GREENLEE -

D Punch Unit, 0.5 x 0.469 Inch Size

ModelItemPrice (inc. VAT)
60077AD8DHE£665.36
KLEIN TOOLS -

Knockout Draw Stud, 3/8 x 2-5/8 Inch Size

ModelItemPrice (inc. VAT)
53871CE4WBU£57.77
12

Knockout Hole Punches

Knockout hole punches are designed to punch a hole through mild steel, sheet metal, aluminium, fibreglass and plastic surfaces. Raptor Supplies brings to you an extensive variety of these knockout hole punches from brands like Allpax, Greenlee, Council Tool, Milwaukee, Roper Whitney, Westward, Malco and Jackson. These knockout hole punches come with centring marks to ensure hole alignment and a unique punch profile to split slugs for easy slug removal. They can be used manually, or with battery-powered, hydraulic, ratchet or manual drivers. We also offer black-out punches with a handle for driving out stubborn bolts, rivets and pins. These punches are further heat treated after machining to offer an increased depth of hardness. Choose from a wide range of these knockout hole punches available in 0 to 9 pin variants on Raptor Supplies.

Frequently Asked Questions

How to maintain knockout hole punches?

To maintain knockout hole punches, you should keep them clean and dry when not in use and periodically lubricate the moving parts to ensure smooth operation.

What factors should be considered while choosing a knockout hole punch?

When choosing a knockout hole punch, consider factors such as the size & shape of the holes you need to create and the thickness of the material you will be cutting.

We are here to help!

Looking for a part not listed here?