Gas Unit Heaters | Raptor Supplies United Kingdom

Gas Unit Heaters

Filter

Dayton gas unit heaters can be suspended from walls or ceilings for intermittent or continuous heating in areas, such as factories, stock rooms, warehouses, service stations and garages....Read more

DAYTON -

Gas Unit Heaters

StyleModelAir FlowBtuH OutputDepthFull Load AmpsHeightWidthPrice (inc. VAT)
A55FG682400 cfm124,50043-1/2"6.933-3/4"25-1/4"£2,531.78
A55FG713450 cfm207,50043-1/2"833-3/4"37-1/4"£3,420.36
B55FG745800 cfm332,00044-3/4"13.834"55-1/4"£5,031.35
DAYTON -

Gas Low-Profile Unit Heaters

Dayton gas low-profile unit heaters provide continuous heating in large areas such as warehouses, factories, stock rooms, garages & service stations. These heaters are more compact than standard-profile heaters, and are also suitable for confined spaces or areas with little headroom. They can be suspended from ceilings or walls to heat environments with limited floor space, and deliver flow rates up to 1300 cfm. These heaters offer a maximum heating capacity of 97200 BtuH.

StyleModelAir FlowBtuH OutputDepthFull Load AmpsHeightPrice (inc. VAT)
A2RYU7370 cfm24,30025.875"3.012.38"£1,972.59
A2RYU8550 cfm36,45025.875"3.012.38"£2,043.02
A2RYU9740 cfm48,80026.187"3.715.875"£2,170.88
A2RYV1920 cfm60,75026.187"4.115.875"£2,247.59
A2RYV21100 cfm72,90026.375"5.722.625"£2,533.64
B2RYV31300 cfm85,05026.375"6.422.625"£2,497.17
B2RYV41475 cfm97,20026.375"6.422.625"£2,562.42
NEXUS -

Gas Wall and Ceiling Unit Heaters

StyleModelPrice (inc. VAT)
A11HU100A1NS1110A£5,975.93
B11HU200A1NS1110A£7,415.91
B11HU400A1NS1110A£12,403.13
A11HU050A1NS1110A£4,667.84
A11HU150A1NS1110A£6,481.31
B11HU300A1NS1110A£9,990.63
DAYTON -

Natural Gas Unit Heaters

StyleModelAir FlowDrive TypeMotor TypeOverall DepthOverall HeightOverall WidthPrice (inc. VAT)
A55FG661600 cfmDirectSP43-1/2"33-3/4"25-1/4"£2,314.25
RFQ
A55FG672200 cfmDirectPSC43-1/2"33-3/4"25-1/4"£2,446.22
RFQ
B55FG924724 cfmBeltCap. Start56-1/8"34"55-1/4"£7,293.83
RFQ

Gas Unit Heaters

Gas unit heaters are suspended from walls or ceilings to provide occasional or continuous heating in warehouses, factories, garages and stock rooms. Dayton gas unit heaters do not occupy floor space and feature a heat exchanger and a fan to provide hot air in the area. These heaters are field convertible to feature both open and separated combustion configurations. Open combustion configuration heaters suck air in from the surrounding area to provide heated air whereas separated combustion configuration heaters take in air from outside the area for heating in case of dirty and corrosive room conditions. Raptor Supplies offers a wide array of gas unit heaters, available in low profile gas unit heater variant offering a compact size and standard profile gas unit heaters, providing greater heat output.

Frequently Asked Questions

What is a propeller fan used for?

Dayton gas heaters are equipped with propeller fans that offer a rotating mechanism with the help of specially angled blades to generate thrust and higher airflow with little increase in pressure.

Is a gas heater better than an electric heater?

Gas heaters generally produce greater heat in less time as compared to electric furnaces, making them ideal for colder climates. The gas heaters are powered by a fuel, such as natural gas, LPG (liquified petroleum gas), propane or butane for circulating uniform heat throughout the facility.

Is a wall heater a unit heater?

Yes, wall heaters are heating units installed directly to a wall in studio apartments, compact living spaces and small offices. These units generate a good amount of heat, thus keeping the small space warm & comfortable and need no floor space.

We are here to help!

Looking for a part not listed here?