What is the difference between carriage bolts & hex head lag screws?

Carriage bolts have a flat end, whereas hex head lag bolts feature a pointed tip. The flat end of carriage bolts can accept a washer & nut for secure installation. Lag bolts have wide threads and are screwed directly into wood, without requiring nuts to complete the assembly.

What is the difference between carriage bolts and plow bolts?

Carriage bolts are generally used in smaller equipment like snowplows attached to pick-up trucks, whereas plow bolts are used in larger plow equipment like excavators. Carriage bolts have a flat profile across the bottom of the head, while plow bolts have an angled head for fitting onto countersunk holes.

Why are carriage bolts named so?

Carriage bolts became popular when they started getting used in the manufacturing of carriages & carriage wheels. Thus, they got named 'carriage bolts'.

What does the strength grades / classes mean in carriage bolts?

The grade or class of a fastener indicates its strength & compatibility with the respective nut / threaded rod / screw / bolt / washer. Generally, the higher the grade, the higher the strength of the fastener. SAE specifies grades for Imperial-sized carriage bolts. Carriage bolts having the same SAE strength grade as a nut should be used together. ISO rates Metric-sized carriage bolts. Carriage bolts having the same first digit as a nut are meant to be used together. ASTM grades carriage bolts based on factors like strength, high-pressure & high-temperature application.

How to install a carriage bolt?

Drill a hole of the appropriate bolt size (diameter) into the surface for sliding the bolt. Place the washer & nut on the back side of the bolt (opposite side of the head). Tighten the nut to pull the bolt's square shoulder into the surface. When the underside of the bolt head rests against the surface, the carriage bolt is completely installed.

How to remove a carriage bolt?

Twist the nut loose to the end of the bolt. Do not take the nut out of the bolt as it is required to move the bolt. Hit the nut using a hammer to move the bolt's square shoulder out of the surface. After some time, the nut would get closer to the surface. Repeat the process till the nut no longer grips the bolt or when the bolt can be removed by hand. Users can pry the bolt out of the hole using the nail remover attached to a hammer, if the bolt gets stuck in the hole.

Do carriage bolts need washers?

It is highly recommended to use washers with carriage bolts. Using a washer under the screw head increases the surface area and distributes the load. This decreases damage when pulling the bolt through the material using the nut and prevents the bolt from sticking / digging into the surface.

What are some standards that carriage bolts abide by?

Carriage bolts may adhere to international standards like ASME (American Society of Mechanical Engineers), ASTM (American Society for Testing and Materials), ISO (International Organization for Standardization), SAE International (Society of Automotive Engineers) & DIN (German Institute for Standardization) for meeting performance, safety, dimensional & material requirements.

Carriage Bolts | Raptor Supplies United Kingdom

APPROVED VENDOR -

1/4"-20 Coarse Zinc Plated Grade 2 Steel Square Neck Carriage Bolts

A

B

C

D

Style	Model	Thread Style	Head Dia.	Square Height	Thread Length	Head Style	Neck Width	Tensile Strength	Price (inc. VAT)	Pkg. Qty.
A	B08305.025.0050	Fully Threaded	9/16"	9/64"	1/2"	Round Spacer	1/4"	74000 psi	£90.33	1
A	U08305.025.0100	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£7.68	100
B	U08305.025.0300	Fully Threaded	9/16"	9/64"	3/4"	Round Spacer	1/4"	74000 psi	£6.57	50
A	U08305.025.0150	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£7.09	100
A	U08305.025.0175	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£13.66	100
B	U08305.025.0400	Fully Threaded	9/16"	9/64"	3/4"	Round Spacer	1/4"	74000 psi	£7.54	50
A	U08305.025.0062	Fully Threaded	9/16"	9/64"	5/8"	Round Spacer	1/4"	74000 psi	£8.51	100
A	U08305.025.0075	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£4.16	100
A	U08305.025.0125	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£6.87	100
A	U08305.025.0200	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£9.93	100
A	U08305.025.0250	Fully Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£11.39	100
B	U08305.025.0350	Fully Threaded	9/16"	9/64"	3/4"	Round Spacer	1/4"	74000 psi	£9.09	50
C	U08305.025.0500	Partially Threaded	9/16"	9/64"	3/4"	Round Spacer	1/4"	74000 psi	£14.90	50
D	U08305.025.0225	Partially Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£14.78	100
C	U08305.025.0450	Partially Threaded	9/16"	9/64"	3/4"	Round Spacer	1/4"	74000 psi	£15.50	50
D	U08305.025.0275	Partially Threaded	0.563"	1/8"	3/4"	Round Spacer	1/4"	74000 psi	£32.25	100

FABORY -

M10 x 1.5 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

A

B

C

D

E

Style	Model	Thread Style	Thread Length	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M08250.100.0020	Fully Threaded	20 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£54.59	100
B	M08250.100.0025	Fully Threaded	25 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£69.18	100
C	M08250.100.0045	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£57.81	50
D	M08250.100.0150	Partially Threaded	32 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£48.44	25
D	M08250.100.0120	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£44.17	25
D	M08250.100.0100	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£73.69	50
C	M08250.100.0075	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£43.50	50
C	M08250.100.0070	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£54.88	50
C	M08250.100.0060	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£54.35	50
C	M08250.100.0055	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£52.64	50
C	M08250.100.0035	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£42.01	50
C	M08250.100.0040	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£35.97	50
E	M08250.100.0200	Partially Threaded	32 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£72.99	25
D	M08250.100.0130	Partially Threaded	32 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£44.22	25
D	M08250.100.0110	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£47.42	25
D	M08250.100.0080	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£59.14	50
C	M08250.100.0065	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£46.15	50
C	M08250.100.0050	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£48.33	50
C	M08250.100.0030	Partially Threaded	26 mm	Round Spacer	10.58 mm	23.35 mm	6.6 mm	58000 psi	Right Hand	£67.68	100

FOREVERBOLT -

3/8"-16 Coarse NL-19 Grade 18-8 Stainless Steel Square Neck Carriage Bolts
Carriage bolts are suitable for fastening wooden or metallic surfaces with each other in automotive, manufacturing, woodworking and maintenance & repair applications. They usually feature a domed head without a drive and require a nut & washer to pull them into the material.
These coarsely threaded bolts have fewer threads per inch than fine threads for quick installation and excellent resistance to stripping. They feature Grade 18-8 stainless steel construction for strength and NL-19 coating for protection against salt spray and other corrosive elements. These bolts further feature a square neck design to prevent them from rotating during installation, making it easier to tighten the nut.

A

B

Style	Model	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	FBCB3825P25	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£71.99	25
B	FBCB3845P10	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£45.42	10
B	FBCB3855P10	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£57.31	10
B	FBCB385P10	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£52.07	10
A	FBCB3815P25	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£62.38	25
A	FBCB382P25	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£67.71	25
A	FBCB3835P10	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£42.99	10
A	FBCB381P25	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£55.79	25
A	FBCB383P25	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£82.48	25
B	FBCB384P20	Fully Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£78.39	20
B	FBCB386P10	Partially Threaded	Round Spacer	3/8"	25/32"	13/64"	100000 psi	Right Hand	£47.77	10

FABORY -

M12 x 1.75 Metric Coarse Plain Grade A2 Stainless Steel Square Neck Carriage Bolts

A

B

Style	Model	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Thread Length	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M51500.120.0030	Fully Threaded	Round Spacer	12.7 mm	29.35 mm	8.75 mm	30 mm	101500 psi	Right Hand	£33.80	25
B	M51500.120.0040	Partially Threaded	Round Spacer	12.7 mm	29.35 mm	8.75 mm	30 mm	101500 psi	Right Hand	£18.51	10

FABORY -

M6 x 1 Metric Coarse Plain Grade A2 Stainless Steel Square Neck Carriage Bolts
Carriage bolts are suitable for fastening wooden or metallic surfaces with each other in automotive, manufacturing, woodworking and maintenance & repair applications. They usually feature a domed head without a drive and require a nut & washer to pull them into the material.
These coarsely threaded bolts have fewer threads per mm than fine threads for quick installation and excellent resistance to stripping. They feature Grade A2 stainless steel construction for strength and plain finish to avoid oxidation on exposed surfaces. These bolts further feature a square neck design to prevent the bolt from rotating during installation, making it easier to tighten the nut.

A

B

C

D

E

Style	Model	Thread Style	Thread Length	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M51500.060.0016	Fully Threaded	16 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£23.40	100
B	M51500.060.0040	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£34.70	100
B	M51500.060.0050	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£19.57	50
C	M51500.060.0035	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£27.13	100
D	M51500.060.0070	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£29.27	50
E	M51500.060.0100	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£30.95	50
C	M51500.060.0020	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£25.51	100
C	M51500.060.0030	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£29.33	100
E	M51500.060.0080	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£18.41	50
C	M51500.060.0025	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£26.64	100
B	M51500.060.0045	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£35.52	100
D	M51500.060.0060	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	101500 psi	Right Hand	£28.07	50

FABORY -

M16 x 2 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

A

B

Style	Model	Thread Length	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M08250.160.0070	38 mm	Partially Threaded	Round Spacer	16.7 mm	37.2 mm	12.9 mm	58000 psi	Right Hand	£22.30	10
B	M08250.160.0100	38 mm	Partially Threaded	Round Spacer	16.7 mm	37.2 mm	12.9 mm	58000 psi	Right Hand	£38.37	10
A	M08250.160.0060	38 mm	Partially Threaded	Round Spacer	16.7 mm	37.2 mm	12.9 mm	58000 psi	Right Hand	£56.10	25
B	M08250.160.0080	38 mm	Partially Threaded	Round Spacer	16.7 mm	37.2 mm	12.9 mm	58000 psi	Right Hand	£25.00	10
B	M08250.160.0140	44 mm	Partially Threaded	Round Spacer	16.7 mm	37.2 mm	12.9 mm	58000 psi	Right Hand	£64.62	10

FABORY -

M6 x 1 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

A

B

C

D

Style	Model	Thread Style	Thread Length	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M08250.060.0016	Fully Threaded	16 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£24.55	100
B	M08250.060.0070	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£35.72	100
B	M08250.060.0080	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£43.13	100
B	M08250.060.0060	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£30.29	100
C	M08250.060.0040	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£30.51	100
C	M08250.060.0030	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£26.92	100
C	M08250.060.0020	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£26.83	100
B	M08250.060.0090	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£47.77	100
C	M08250.060.0050	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£33.10	100
C	M08250.060.0025	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£21.34	100
C	L08250.060.0030	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£160.09	1
B	M08250.060.0100	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£34.95	100
B	M08250.060.0075	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£34.54	100
B	M08250.060.0055	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£40.20	100
C	M08250.060.0045	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£27.47	100
C	M08250.060.0035	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£29.76	100
D	M08250.060.0110	Partially Threaded	18 mm	Round Spacer	6.48 mm	15.45 mm	4.6 mm	58000 psi	Right Hand	£55.96	100

FABORY -

1/2"-13 Coarse Black Oxide Grade A Steel Square Neck Carriage Bolts
Carriage bolts are suitable for fastening wooden or metallic surfaces in automotive, manufacturing, woodworking and maintenance & repair applications. They usually feature a domed head without a drive and require a nut & washer to pull them into the material.
These coarsely threaded bolts have fewer threads per inch than fine threads for quick installation and excellent resistance to stripping. They feature Grade A steel construction for structural rigidity and black oxide finish for high corrosion resistance & minimum colour reflection. These bolts further feature a square neck design to prevent the bolt from rotating during installation, making it easier to tighten the nut.

A

B

Style	Model	Thread Style	Neck Width	Head Style	Head Dia.	Square Height	Thread Length	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	B08300.050.0500	Fully Threaded	1/4"	Round Spacer	1.094"	9/32"	1 1/4"	74000 psi	Right Hand	£54.14	90
B	B08300.050.0350	Partially Threaded	1/2"	Round Spacer	1.094"	9/32"	1 1/4"	74000 psi	Right Hand	-	125	RFQ

APPROVED VENDOR -

3/8"-16 Coarse Zinc Plated Grade A Steel Square Neck Carriage Bolts

A

B

Style	Model	Thread Style	Head Dia.	Square Height	Thread Length	Head Style	Neck Width	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	U08305.037.0075	Fully Threaded	13/16"	13/64"	3/4"	Round Spacer	3/8"	74000 psi	-	£13.63	100
B	B08305.037.0225	Partially Threaded	0.782"	3/16"	1"	Round Spacer	3/8"	74000 psi	Right Hand	£123.77	300

APPROVED VENDOR -

1/2"-13 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

A

B

C

D

E

Style	Model	Thread Style	Neck Width	Head Dia.	Square Height	Thread Length	Head Style	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	U08320.050.0100	Fully Threaded	3/8"	1 1/16"	13/64"	1"	Round Spacer	120000 psi	-	£23.78	50
B	U08320.050.0400	Fully Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£10.21	10
A	B08320.050.0100	Fully Threaded	3/8"	1.094"	9/32"	1"	Round Spacer	120000 psi	Right Hand	£153.79	250
A	U08320.050.0125	Fully Threaded	1/2"	1 1/16"	17/64"	1 1/4"	Round Spacer	120000 psi	-	£37.83	50
C	U08320.050.0250	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£42.73	25
C	U08320.050.0150	Partially Threaded	1/2"	1 1/16"	17/64"	1 1/4"	Round Spacer	120000 psi	-	£31.21	50
C	U08320.050.0200	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£12.38	25
B	U08320.050.0500	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£12.29	10
B	B08320.050.0500	Partially Threaded	1/2"	1.094"	0.25" to 0.281"	1 1/4"	Round Spacer	-	Right Hand	-	90	RFQ
C	U08320.050.0175	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£14.90	25
D	U08320.050.0600	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£14.29	10
E	U08320.050.0300	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£50.24	25
B	U08320.050.0350	Partially Threaded	1/2"	1 1/32"	17/64"	1 1/4"	Round Spacer	-	-	£19.36	10

APPROVED VENDOR -

3/8"-16 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

A

B

C

D

E

F

Style	Model	Thread Style	Head Dia.	Thread Length	Head Style	Neck Width	Square Height	Tensile Strength	Price (inc. VAT)	Pkg. Qty.
A	B08320.037.0100	Fully Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	120000 psi	£126.47	500
A	U08320.037.0100	Fully Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£22.72	100
A	U08320.037.0075	Fully Threaded	13/16"	3/4"	Round Spacer	3/8"	13/64"	120000 psi	£28.98	100
B	U08320.037.0150	Partially Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£27.91	100
C	U08320.037.0300	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£8.24	25
D	U08320.037.0250	Partially Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£17.90	50
E	U08320.037.0500	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£5.68	10
F	U08320.037.0600	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£7.60	10
C	B08320.037.0400	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	120000 psi	£106.84	200
C	U08320.037.0350	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£22.85	25
B	U08320.037.0125	Partially Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£35.47	100
B	U08320.037.0175	Partially Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£57.39	100
B	U08320.037.0225	Partially Threaded	13/16"	1"	Round Spacer	3/8"	13/64"	120000 psi	£17.97	50
B	U08320.037.0200	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£12.34	50
C	U08320.037.0400	Partially Threaded	25/32"	1"	Round Spacer	3/8"	13/64"	-	£11.79	25

APPROVED VENDOR -

5/16"-18 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

A

B

C

D

E

Style	Model	Thread Style	Head Dia.	Square Height	Thread Length	Head Style	Neck Width	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	U08320.031.0075	Fully Threaded	45/64"	11/64"	3/4"	Round Spacer	5/16"	120000 psi	-	£20.81	100
B	U08320.031.0400	Partially Threaded	11/16"	11/64"	7/8"	Round Spacer	5/16"	-	-	£41.85	50
B	U08320.031.0300	Partially Threaded	11/16"	11/64"	7/8"	Round Spacer	5/16"	-	-	£31.57	50
C	U08320.031.0125	Partially Threaded	45/64"	11/64"	7/8"	Round Spacer	5/16"	120000 psi	-	£28.64	100
D	U08320.031.0500	Partially Threaded	11/16"	11/64"	7/8"	Round Spacer	5/16"	-	-	£53.11	50
B	B08320.031.0400	Partially Threaded	0.719"	0.156" to 0.187"	7/8"	Round Spacer	5/16"	-	Right Hand	-	300	RFQ
C	U08320.031.0100	Partially Threaded	45/64"	11/64"	7/8"	Round Spacer	5/16"	120000 psi	-	£23.09	100
C	U08320.031.0150	Partially Threaded	45/64"	11/64"	7/8"	Round Spacer	5/16"	120000 psi	-	£39.30	100
C	U08320.031.0200	Partially Threaded	45/64"	11/64"	7/8"	Round Spacer	5/16"	120000 psi	-	£21.16	100
E	U08320.031.0250	Partially Threaded	11/16"	11/64"	7/8"	Round Spacer	5/16"	-	-	£26.52	50
C	B08320.031.0125	Partially Threaded	0.719"	3/16"	7/8"	Round Spacer	5/16"	120000 psi	Right Hand	-	700	RFQ

APPROVED VENDOR -

5/8"-11 Coarse Black Oxide Grade 5 Steel Square Neck Carriage Bolts

A

B

C

D

E

F

G

Style	Model	Thread Length	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Fit	Price (inc. VAT)	Pkg. Qty.
A	217135G	1 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£59.52	25
A	217145G	1 29/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£43.98	25
A	217155G	2 5/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£59.61	25
A	217165G	2 13/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£61.89	25
B	217175G	2 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£28.88	10
B	217195G	3 5/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£28.58	10
C	217215G	3 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£14.95	5
C	217235G	4 5/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£16.88	5
C	217255G	4 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£19.33	5
D	217275G	5 5/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£26.33	5
D	217295G	5 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£24.70	5
E	217335G	6 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£43.34	5
F	217375G	7 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£53.87	5
G	217415G	8 21/32"	Fully Threaded	Round Spacer	5/8"	1 7/32"	21/64"	120000 psi	Class 2A	£11.13	1

EARNEST -

3/4"-10 Coarse Black Oxide Grade 8 Steel Square Neck Carriage Bolts

A

B

C

D

E

F

Style	Model	Thread Length	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Fit	Price (inc. VAT)	Pkg. Qty.
A	218158G	2 3/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£75.13	10
B	218168G	2 11/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£66.48	10
C	218178G	2 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£36.12	5
C	218198G	3 3/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£47.07	5
C	218218G	3 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£40.23	5
C	218238G	4 3/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£40.45	5
D	218258G	4 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£43.18	5
E	218278G	5 3/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£47.37	5
E	218298G	5 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£51.59	5
E	218338G	6 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£68.85	5
F	218418G	8 19/32"	Fully Threaded	Round Spacer	3/4"	1 15/32"	25/64"	150000 psi	Class 2A	£18.87	1

EARNEST -

3/8"-16 Coarse Black Oxide Grade 2 Steel Square Neck Carriage Bolts

A

B

C

D

E

F

G

H

I

Style	Model	Thread Style	Thread Length	Tensile Strength	Head Style	Neck Width	Head Dia.	Square Height	Thread Fit	Price (inc. VAT)	Pkg. Qty.
A	U08300.037.0250	Fully Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£11.62	50
B	U08300.037.0100	Fully Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£21.85	100
C	B08300.037.0250	Fully Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£76.59	300
D	U08300.037.0150	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£41.51	100
D	U08300.037.0200	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£17.43	50
E	U08300.037.0300	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£12.94	25
F	U08300.037.0450	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£8.99	10
F	U08300.037.0500	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£9.01	10
G	U08300.037.0600	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£11.36	10
H	U08300.037.0650	Partially Threaded	1 1/4"	60000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£10.28	10
H	U08300.037.0700	Partially Threaded	1 1/4"	60000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£11.83	10
I	U08300.037.0400	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£13.69	25
I	U08300.037.0350	Partially Threaded	1"	74000 psi	Round Spacer	3/8"	25/32"	13/64"	Class 2A	£18.48	25

EARNEST -

5/16"-18 Coarse Black Oxide Grade 8 Steel Square Neck Carriage Bolts

A

B

Style	Model	Thread Length	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Fit	Price (inc. VAT)	Pkg. Qty.
A	215318G	1 9/16"	Fully Threaded	Round Spacer	5/16"	11/16"	11/64"	150000 psi	Class 2A	£110.98	100
B	215238G	9/16"	Fully Threaded	Round Spacer	5/16"	11/16"	11/64"	150000 psi	Class 2A	£70.74	100

APPROVED VENDOR -

3/8"-16 Coarse Zinc Plated Grade 2 Steel Square Neck Carriage Bolts

A

B

C

D

E

F

G

Style	Model	Thread Style	Head Dia.	Square Height	Thread Length	Tensile Strength	Head Style	Neck Width	Price (inc. VAT)	Pkg. Qty.
A	U08305.037.0125	Fully Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£15.06	100
A	U08305.037.0250	Fully Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£13.45	50
A	B08305.037.0125	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£88.82	500
B	U08305.037.0500	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£4.41	10
C	U08305.037.0450	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£4.24	10
C	U08305.037.0350	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£8.15	25
A	U08305.037.0175	Fully Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£28.38	100
B	B08305.037.0500	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£90.07	160
B	U08305.037.0600	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£5.03	10
C	U08305.037.0400	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£9.35	25
C	U08305.037.0300	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£6.53	25
A	U08305.037.0150	Fully Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£17.90	100
A	U08305.037.0100	Fully Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£15.24	100
A	B08305.037.0100	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£93.95	500
A	U08305.037.0200	Fully Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£12.08	50
D	U08305.037.0275	Partially Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£26.74	50
E	U08305.037.0225	Partially Threaded	0.782"	3/16"	1"	74000 psi	Round Spacer	3/8"	£17.56	50
F	U08305.037.0800	Partially Threaded	25/32"	13/64"	1 1/4"	60000 psi	Round Spacer	3/8"	£6.06	10
F	U08305.037.0700	Partially Threaded	25/32"	13/64"	1 1/4"	60000 psi	Round Spacer	3/8"	£7.12	10
F	B08305.037.0800	Partially Threaded	25/32"	13/64"	1 1/4"	60000 psi	Round Spacer	3/8"	£81.49	110
G	U08305.037.0550	Partially Threaded	25/32"	13/64"	1"	74000 psi	Round Spacer	3/8"	£6.91	10

FOREVERBOLT -

1/2"-13 Coarse NL-19 Grade 18-8 Stainless Steel Square Neck Carriage Bolts

A

B

C

Style	Model	Thread Style	Square Height	Head Style	Neck Width	Head Dia.	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	FBCB1235P5	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£37.05	5
B	FBCB1245P5	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£40.20	5
A	FBCB1215P10	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£35.21	10
A	FBCB122P10	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£54.84	10
B	FBCB1255P5	Fully Threaded	17/64"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£49.58	5
A	FBCB1225P10	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£46.44	10
B	FBCB124P5	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£34.90	5
A	FBCB121P10	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£35.21	10
A	FBCB123P5	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£32.83	5
B	FBCB125P5	Fully Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£38.92	5
C	FBCB126P5	Partially Threaded	0.25" to 0.281"	Round Spacer	1/2"	1 1/32"	100000 psi	Right Hand	£50.13	5

FABORY -

M8 x 1.25 Metric Coarse Plain Grade A2 Stainless Steel Square Neck Carriage Bolts

A

B

C

D

E

Style	Model	Thread Style	Thread Length	Head Style	Neck Width	Head Dia.	Square Height	Tensile Strength	Thread Direction	Price (inc. VAT)	Pkg. Qty.
A	M51500.080.0020	Fully Threaded	20 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£19.96	50
A	M51500.080.0016	Fully Threaded	16 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£25.58	50
B	M51500.080.0035	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£29.26	50
C	M51500.080.0060	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£49.44	50
D	M51500.080.0080	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£21.94	25
D	M51500.080.0100	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£19.22	25
D	M51500.080.0110	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£45.21	25
B	M51500.080.0025	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£33.03	50
C	M51500.080.0040	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£35.89	50
E	M51500.080.0070	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£16.44	25
B	M51500.080.0030	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£28.89	50
C	M51500.080.0050	Partially Threaded	22 mm	Round Spacer	8.58 mm	19.35 mm	5.6 mm	101500 psi	Right Hand	£32.57	50

GRAINGER -

5/8"-11 Coarse Hot Dipped Galvanized Grade 2 Steel Square Neck Carriage Bolts

A

B

C

Style	Model	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Thread Length	Tensile Strength	Price (inc. VAT)	Pkg. Qty.
A	U08307.062.0300	Partially Threaded	Round Spacer	5/8"	1 7/32"	21/64"	1 1/2"	74000 psi	£33.17	10
B	U08307.062.0200	Partially Threaded	Round Spacer	5/8"	1 7/32"	21/64"	1 1/2"	74000 psi	£20.08	10
C	U08307.062.0400	Partially Threaded	Round Spacer	5/8"	1 7/32"	21/64"	1 1/2"	74000 psi	£32.16	10
A	U08307.062.0250	Partially Threaded	Round Spacer	5/8"	1 7/32"	21/64"	1 1/2"	74000 psi	£32.23	10
C	U08307.062.0500	Partially Threaded	Round Spacer	5/8"	1 7/32"	21/64"	1 1/2"	74000 psi	£18.86	10

APPROVED VENDOR -

5/16"-18 Coarse Chrome Plated Grade 5 Steel Square Neck Carriage Bolts

A

B

C

Style	Model	Thread Style	Head Style	Neck Width	Head Dia.	Square Height	Thread Length	Tensile Strength	Price (inc. VAT)	Pkg. Qty.
A	MPB753	Fully Threaded	Round Spacer	5/16"	45/64"	11/64"	7/8"	120000 psi	£22.59	5
B	MPB750	Fully Threaded	Round Spacer	5/16"	45/64"	11/64"	7/8"	120000 psi	£15.57	5
C	MPB752	Fully Threaded	Round Spacer	5/16"	45/64"	11/64"	7/8"	120000 psi	£19.89	5
B	MPB663	Fully Threaded	Round Spacer	5/16"	45/64"	11/64"	-	120000 psi	£15.55	5
B	MPB751	Fully Threaded	Round Spacer	5/16"	45/64"	11/64"	7/8"	120000 psi	£15.91	5

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Carriage Bolts

1/4"-20 Coarse Zinc Plated Grade 2 Steel Square Neck Carriage Bolts

M10 x 1.5 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

M12 x 1.75 Metric Coarse Plain Grade A2 Stainless Steel Square Neck Carriage Bolts

M16 x 2 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

M6 x 1 Metric Coarse Zinc Plated Class 4.6 Steel Square Neck Carriage Bolts

3/8"-16 Coarse Zinc Plated Grade A Steel Square Neck Carriage Bolts

1/2"-13 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

3/8"-16 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

5/16"-18 Coarse Zinc Plated Grade 5 Steel Square Neck Carriage Bolts

5/8"-11 Coarse Black Oxide Grade 5 Steel Square Neck Carriage Bolts

3/4"-10 Coarse Black Oxide Grade 8 Steel Square Neck Carriage Bolts

3/8"-16 Coarse Black Oxide Grade 2 Steel Square Neck Carriage Bolts

5/16"-18 Coarse Black Oxide Grade 8 Steel Square Neck Carriage Bolts

3/8"-16 Coarse Zinc Plated Grade 2 Steel Square Neck Carriage Bolts

1/2"-13 Coarse NL-19 Grade 18-8 Stainless Steel Square Neck Carriage Bolts

M8 x 1.25 Metric Coarse Plain Grade A2 Stainless Steel Square Neck Carriage Bolts

5/8"-11 Coarse Hot Dipped Galvanized Grade 2 Steel Square Neck Carriage Bolts

5/16"-18 Coarse Chrome Plated Grade 5 Steel Square Neck Carriage Bolts

Carriage Bolts

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Carriage Bolts

Carriage Bolts

Frequently Asked Questions

What is the difference between carriage bolts & hex head lag screws?

What is the difference between carriage bolts and plow bolts?

Why are carriage bolts named so?

What does the strength grades / classes mean in carriage bolts?

How to install a carriage bolt?

How to remove a carriage bolt?

Do carriage bolts need washers?

What are some standards that carriage bolts abide by?

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More