VESTIL AHA-2/4-TLC Total Locking Caster, Aluminium, Gantry Crane

Working Mechanism:

• The gantry crane can be raised 8 to 10 inches off the ground using a forklift or hoist before positioning the casters.
• Fasten the casters to the caster mount bracket on the aluminium gantry crane's legs using bolts, nuts & washer.
• Tighten the hardware using a torque wrench.

Compatible Accessories:

• Aluminium Gantry Cranes: This total locking caster set can be installed on aluminium gantry cranes having 2000 & 4000 lb capacities.

Standards and Approvals:

• OSHA

Frequently Asked Questions:

Q. What are points to consider before operating this Vestil AHA-2/4-TLC total locking caster set?

A. Users should check the casters for any cracks, tears or significant wear. Then, they should push the crane unit for a short distance. All attached casters should be tightly fastened & remain in continuous contact with the ground. The casters should roll smoothly on surfaces without wobbling or skidding.

Q. What safety recommendations users should remember while using these casters?

A. Casters attached to gantry cranes only support loads when stationary. They should not be moved during the lifting of loads.