MAKITA PW5001C Wet Stone Polisher, 7.9 A, 2000-4000 rpm

Makita PW5001C electronic wet stone polisher is ideal for professional stone polishing applications on granite, marble & other stones. It uses a 4-inch pad and water hose connections to provide precision stone finishes. This Makita PW5001C features a 7.9A, 900W motor with variable speed control to offer optimum speed settings ranging from 2000 to 4000 rpm. Its electronic speed control mechanism ensures smooth start-ups and maintains a fixed speed under load.

Working Mechanism:

• Connect the water hose to the tool and ensure that water comes out after the lever is opened.
• Turn the tool On at desired speed setting and apply the abrasive disc with slight pressure to the workpiece.
• Excessive pressure may damage the abrasive disc & cause poor performance.

Features:

• Makita PW5001C electronic wet stone polisher has a lightweight design with durable housing for protecting the die-cast aluminium gear housing.
• Its side handle & high power-to-weight ratio ensures decreased user fatigue.
• This polisher is equipped with a common-sized fitting to accept popular water hose connections.
• Its spindle top features 3 holes for uniform water distribution to the pad while preventing clogging.
• It comes with covers, a rubber pad and a wrench for safe storage, installation & operation.

Compatible Accessories:

• Replacement Parts: Raptor Supplies can offer replacement parts like gear housing, switch knob & water hose coupling to replace the old & damaged parts of this polisher.

Frequently Asked Questions:

Q. What are some safety features offered in this Makita PW5001C wet stone polisher?

A. Makita PW5001C wet stone polisher comes with an overload switch and a ground fault circuit interrupter (GFCI) plug for protecting the unit from armature failure and short circuits.

Q. What are some safety instructions to be followed during the operation of Makita PW5001C wet stone polisher?

A.

• The tool should be held by the insulated gripping surfaces to prevent electric shocks.
• Users should always wear safety glasses, rubber gloves & boots.
• The backing pad should be checked carefully for cracks, damages or deformity before operation.
• Water must not enter the tool's motor.
• Users should not touch the moving parts during operation.

Q. What are the unique switch action features in this Makita PW5001C wet stone polisher?

A. Makita PW5001C wet stone polisher can be started by sliding the slide switch towards On position. During continuous operation, users can lock the slide switch by pressing the front of the slide switch. The tool can be stopped by pressing the slide switch's rear to release the switch lock and then sliding the switch toward the Off position.