KRUEGER H-1.5-72 Therma Level Gauge, 1.5" NPT, 72" Depth, Galvanized Steel

Krueger H-1.5-72 Therma level gauge is suitable for above-the-ground storage tanks. This easy-to-install AT-A-GLANCE level gauge is designed for measuring all types of liquid levels.

Features:

• Krueger H-1.5-72 AT-A-GLANCE Therma level gauge comes with a 2-piece bushing structure to point the swing arm away from corners, walls & other tank impediments.
• Its simple mechanical design ensures longevity, minimum maintenance, rapid installation and affordable repairs.
• The stainless steel constructed wetted / bushing provides exceptional compatibility with aggressive chemicals.
• On one side, the gauge is calibrated in eighths of a tank and on the other, in quarters of a tank.
• The estimated liquid level in the tank is depicted at the top of the red indicator, making it simple to read.
• It features a Duro nitrile gasket, a stainless steel rivet & float and aluminium assembly nut construction for prolonged use and durability.
• This unit can withstand temperatures ranging from -20 to 200 degrees Fahrenheit and pressure up to 70 psi.

Compatible Accessories:

• Krueger Drum Alarms: These Dalarm (direct mount) and Ralarm (remote mount) units are designed to provide visual & audible indication of tank levels. They feature a magnetic switch that triggers a 110 dB alarm and are powered by a 9V lithium battery. These models can be easily reset, even in Alarm mode.
• Krueger LED At-A-Glance Accessories: They provide remote reading capability to the mechanical gauge.
• Krueger Guard Gauges: These covers protect the exposed plastic components on top of the gauge.
• Krueger Glass Calibration: It offers defence against heat, gases & deterioration, and also aids in passing fire inspections.

Frequently Asked Questions:

Q. How do you calibrate a level gauge?

A.

• Open the level gauge housing.
• Find the screw and spin it using an Allen key.
• Depending on the offset you want, slowly rotate either clockwise or counter-clockwise.

Q. How to install a level gauge?

A.

• Unscrew the lid of the barrel.
• Extend the level arm of the flow gauge.
• Slide the gauge tube inside the barrel and attach the float to the other end of the tube.
• Ensure that the tube is plumb / vertical and firmly hand-tighten the cap nut.
• Drill a hole in each of the security housing locations.
• Insert the security screws and tighten.

Q. How does a water level indicator work?

A. Water level indicators use sensor probes to show the amount of water in a storage barrel. These probes relay data back to the control panel to set off an alert.