HARTELL LTA-1 Sink Drain Pump System, 115V, 2.2A, 11 ft. Maximum Head, Polypropylene

Hartell LTA-1 sink drain pump system is a self-contained unit that connects directly to laundry tray tubs. It is used to drain water from wet bar sinks, kitchenettes, utility and laundry tray sinks. This pump includes a pressure-activated switch that turns on the pump when water enters the tub.

Features:

• Hartell LTA-1 sink drain pump system allows sink installation to drain without breaking concrete.
• It does not require traps or inlet piping and mounts directly to the sink tailpiece.
• This pump system has ABS plastic housing for impact, corrosion and chemical resistance.
• It features an electric motor with propylene impellers to produce lift of up to 11 ft.

Compatible Accessories:

• PTFE Thread Sealing Tapes: This pump system requires 1-inch wide tapes to create a waterproof seal at the connection points.

Standards and Approvals:

• cUL
• UL

Frequently Asked Questions:

Q. What is the maximum temperature this pump can withstand?

A. 140 degrees F.

Q. How to install this pump?

A.

• Place the fibre gasket on drain threads and the O-ring on the drain.
• Lift the pump and engage inlet threads with sink drain threads.
• Rotate the pump until the tray adapter flange contacts the gasket.
• Once the contact is made, rotate the pump until it is firmly secured to the drain.
• Install the discharge piping and plug the pump into a grounding-type receptacle.

Q. What is the maximum flow rate this pump can produce?

A.

• 28 GPM at 5 ft
• 10 GPM at 10 ft