EATON QC2060 Quicklag Type Qc Industrial Thermal-Magnetic Circuit Breaker, Industrial Circuit Breaker

Eaton QC2060 circuit breaker is an Eaton Quicklag Type QC industrial thermal-magnetic circuit breaker. It prevents electrical damage to connected devices due to excess current or short circuits. It is used to protect heating, air conditioning and refrigeration (HVACRs) equipment.

Working Mechanism:

• Eaton QC2060 circuit breaker normally passes current through its current-carrying contacts.
• When it detects any fault or issue, the contacts move away from each other and trip the unit thermally or magnetically.
• After troubleshooting the issue, reset the breaker to restart the operation.

Features:

• Eaton QC2060 circuit breaker accommodates 14 to 10 AWG line & 14 to 4 AWG load wires made of aluminium or copper.
• This complete breaker features non-interchangeable thermal & magnetic contacts for long-time and instantaneous protection.
• Its cable-in / cable-out mounting style with line & load side lug terminals allows easy installation on panels or switchboards.

Compatible Accessories:

• Load Centres, Panels & Switchboards: This Eaton QC2060 breaker can easily fit onto panelboards & switchboards for smooth operation & easy control.

Standards and Approvals:

• CSA
• UL

Frequently Asked Questions:

Q. What are the different performance ratings of this Eaton QC2060 circuit breaker?

A. Eaton QC2060 breaker has a current rating of 60A, a voltage rating of 120 / 240V and an interrupt rating of 10kA.

Q. What is the number of poles available in this circuit breaker?

A. This Eaton QC2060 breaker has 2 poles for protecting 2 electrical circuits.

Q. What are the points to inspect before operating this Eaton QC2060 circuit breaker?

A.

• Remove dust, dirt, grease or moisture from the unit.
• Check that the mechanical linkages are free for tripping or switching the unit On / Off.
• Inspect the unit of any cracks, chipping or discolouration. Tighten the terminals & connectors. Check the mounting hardware.
• Remove any safety hazards near the installed area.