DYNABRADE 64208 Downdraft Sanding Table, 33" W x 41" L, 1 Hp, 230 V

Dynabrade 64208 downdraft sanding table is suitable for sanding woods or non-combustible materials while keeping the environment clean by eliminating contaminants and airborne dust.

Working Mechanism:

• Plug this Dynabrade downdraft table into a properly grounded outlet with the required electrical supply.
• Lock the casters in place.
• Place & fix the workpiece on the unit's tabletop (maximum 250 lb).
• Turn the table on and begin the operation.
• The table automatically starts vacuuming the dust & contaminants generated in the operation. Turn off the table after the operation.

Features:

• Dynabrade 64208 downdraft sanding table features a tabletop surface coated with Rhino Linings to prevent slippage.
• It comes with two dust-tight electrical outlets and a 746W motor for high-power operation.
• This downdraft table is equipped with two handy storage compartments and 127 mm diameter casters for easy storing and manoeuvrability of the table.
• It further features dual filtration with one pre-filter blanket and standard paper air filter or UL-rated Class I non-flammable air filter for eliminating contaminations.

Compatible Accessories:

• Dynabrade 64696, 64697 and 64698 Labels: These labels are ideal for signifying the frequent electric warning, spark warning and information for the sanding table for a safe environment.

Standards and Approvals:

• UL

Frequently Asked Questions:

Q. How can Dynabrade 64208 downdraft table be set up?

A.

• To ensure that the air dam works effectively, remove the cardboard strips from the underside of the table.
• Put two rigid casters and two swivel casters into position.
• To steady the table, place it in the work area and lock the swivel casters.
• Place the provided filters and pre-filter.
• Before inserting a cord into a grounded power supply, make sure the top is closed & the power is off.

Q. What is the maximum noise level produced by this standing table?

A. 72 dB.

Q. How to maintain this sanding table?

A.

• Always clean pleated filters and pre-filter regularly.
• Use a brush or dry cloth to clean the top surface.
• Avoid alcohol for cleaning the top surfaces.
• It is mandatory to clean filters every 30-60 days according to the use.
• To ensure proper sitting, regularly vacuum the filter support rails.

Q. What is the filter rating of Dynabrade 64208 sanding table?

A. 1 micron.