DYNABRADE 11203 Contact Arm Assembly GR0027925 GR0027926 GR0027928

Dynabrade 11203 contact arm assembly replaces the damaged, old or worn-out contact arms in the brand's Dynafile II & Electric Dynafile II abrasive belt tools (Dynabrade 40320, 40321 and 40610). It can also be used to extend the tool's reach or reach narrow spaces.

Features:

• Dynabrade 11203 contact arm assembly fits a 1/2 x 18 inch belt for grinding over its contact wheel or platen.
• It comes with a contact arm, wheel, bearings and shaft.
• This Dynabrade 11203 contact arm assembly includes a rubber contact wheel having a 5/8 inch diameter & 3/8 inch width and a 1/2 inch wide soft platen.

Frequently Asked Questions:

Q. How to install this Dynabrade 11203 contact arm assembly in a Dynabrade abrasive belt tool?

A.

• Disconnect the power source.
• Remove the tool's pop-off cover.
• Pull back the tool's tension arm assembly & remove its abrasive belt.
• Remove the adjustment knob.
• Remove the contact arm to be replaced with this Dynabrade 11203 contact arm assembly. Ensure that the tab at the arm's end is facing downward.
• Place the knob & install the abrasive belt & cover.
• Connect the power source again and adjust the belt tracking by left or right turning of the knob while the tool is running.

Q. What are the uses of a Dynabrade abrasive belt tool?

A. Dynabrade Dynafile II (air) or Electric Dynafile II abrasive belt tools are used for grinding, deburring, blending & polishing metal, composites, rubber, plastic, glass, fibreglass and stone surfaces. They have an abrasive belt design with pivoting grinding head technology for quick access to inaccessible areas. Users can grind from their contact wheel or platen pad.

Q. What type of belts can be used with this Dynabrade 11203 contact arm assembly?

A. Dynabrade 11203 contact arm assembly can use abrasive impregnated non-woven nylon, coated abrasive and cloth polishing belts.