| Item | Centrifugal Pedestal Pump Head |
| Casing Adapter | Cast Iron |
| Check Valve | EPDM |
| Connection | 2" x 2" |
| Engine RPM | 3600 |
| Engine/Motor Type | Electric |
| GPH | 11400 |
| GPM of Water @ 10 Ft. of Head | 150 |
| GPM of Water @ 20 Ft. of Head | 147 |
| GPM of Water @ 30 Ft. of Head | 130 |
| GPM of Water @ 40 Ft. of Head | 115 |
| GPM of Water @ 50 Ft. of Head | 90 |
| Height | 13" |
| Impeller | Cast Iron |
| Impeller Material | Cast Iron |
| Impeller Type | Open |
| Inlet | 2" NPT |
| Length | 13.5" |
| Material | Cast Iron |
| Max. Flow | 190 |
| Max. Head | 50 ft. |
| Max. Pressure | 45 psi |
| Max. Suction Lift (Ft.) | 15 |
| Mechanical Seal | EPDM/Carbon Ceramic |
| Outlet | 2" NPT |
| Roll Bar Frame | None |
| Seal Material | Carbon Ceramic |
| Self-Priming | Yes |
| Sensor Type | None |
| Size | 2" |
| Temp. Range | 32 Degrees to150 Degrees |
| Type | Engine Driven |
| Volute/Wear Plate | Cast Iron |
| Width | 8.5" |
| NPT Port | 2 In. |
