ANVIL FIG 292 UFS Beam Clamp with Weldless Eye Nut, RH, Cast Iron

Anvil Fig 292 UFS beam clamp is suitable for suspending heavy loads from beams in manufacturing & automotive plants, storage sites and construction facilities. Anvil beam clamps are fixed in place using a screw & bolt arrangement.

Working Mechanism:

• Anvil FIG 292 UFS beam clamp features curved jaws folded inwards for gripping the beam.
• During installation, the clamp's jaws fit over the edges of the lower beam flange.
• The nut is then tightened on the tie rod to lock the clamp in place.
• The loop is used to hang heavy loads using cable / rope.

Features:

• Anvil FIG 292 UFS beam clamp features forged steel construction to prevent bending / breaking under heavy pulsating loads.
• It is zinc-plated and right-hand threaded for high abrasion resistance.
• This FIG 292 UFS beam clamp has a weldless eye nut that enables horizontal pipe movement without binding.
• It is equipped with a tie rod for a tight, non-slip fit against the beam, preventing any chances of slippage.
• This FIG 292 UFS beam clamp has a self-locking nut that features a nylon insert to prevent loosening.

Standards and Approvals:

• ANSI
• MSS
• Federal Specifications

Frequently Asked Questions:

Q. What size of beams are supported by Anvil FIG 292 beam clamp?

A. This beam clamp supports beams having flange widths up to 15 inches and flange thickness of 1.031 inches.

Q. Can beams be lifted with beam clamps?

A. When attached securely, these clamps can lift heavy beams using forklifts.

Q. Can beam clamps be sideloaded?

A. Beam clamps are intended for inline use only. They should not be sideloaded.

Q. Is this Anvil UFS beam clamp available in left hand thread variant?

A. Yes, customers seeking for left-hand thread beam clamp can consider Anvil Fig 292L beam clamp having left-hand threads with the same specifications, available on Raptor Supplies.