sales@raptorsupplies.co.uk WhatsApp 0203 287 5224
Sign In

VESTIL FMDL Series Fork Mounted Drum Lifters

Vestil FMDL Series fork mounted drum lifters are specialised material handling equipment that handle and transport drums. They are useful in manufacturing plants and warehouses. These drum lifters streamline the handling of heavy & hazardous materials and improve workplace safety.

Filter
VESTIL FMDL-850A
VESTIL FMDL-1500B
VESTIL FMDL-2000C
Color: Yellow , Head Space: 6"
StyleModelOperation TypeDrum MaterialDrum TypeDrum SizeLoad CapacityDrum ActionNumber of DrumsPrice
A
FMDL-850		Manual, Mechanically AutomatedPlastic , SteelOpen30 gal. , 55 gal.750 lbs.Lift , Transport1£1,564.43
B
FMDL-1500		Manual, Mechanically AutomatedFiber , Plastic , SteelOpen30 gal. , 55 gal.1500 lbs.Lift , Transport1£4,547.16
C
FMDL-2000		Manual, Mechanically AutomatedFiber , Plastic , SteelOpen30 gal. , 55 gal.2000 lbs.Lift1£5,481.42

Working Mechanism

  • Before using the drum lifter with a rotator forklift, adjust the positions of your lift truck's forks or tines to match the spacing between the fork pockets. Ensure that the fork position aligns with the drum lifter.
  • Place the drum lifter onto the forks of the rotator forklift. Slowly drive the truck forward until the forks contact the ends of the fork pockets.
  • For models with cam locks, make sure the lifter is fully and evenly supported by the floor, keeping the cam lock open for the forks to enter the fork pockets.
  • Connect the drum lifter to the rotator forklift by attaching the safety chain to the fork carriage. Wrap the chain around the fork carriage and fasten the snap hook to the chain without any slack.
  • If the lifter includes a bracket on the free end of the safety chain, attach it to the top of the carriage securely. Ensure that the chain cannot disconnect from the carriage.
  • To engage a 55-gallon drum, adjust the drum engager to the top hole in the supporting mast.
  • For smaller drums, lower the carriage as much as possible, then remove the adjustment pin.
  • Adjust the engager mounting link so that the lower jaws are slightly below the rim of the drum (ideally near its base).
  • Raise the forks a few inches off the ground / floor and tilt the mast forward.
  • Slowly approach the selected drum until the lower jaw of the drum engager contacts the side of the drum beneath the lip.
  • Raise the forks until the upper jaw engages the top of the drum lip. Continue lifting the forks until the drum is a few inches above the floor / ground.
  • Straighten the mast and transport the drum to your desired unloading location. Adjust the fork height as needed depending on the conditions along the travel path.
  • To release the drum, lower the forks until the drum is just a few inches above the floor. Tilt the fork truck mast forward.
  • Gradually lower the forks until the jaws disengage from the drum's lip and the drum is fully supported by the floor / ground.

Features

  • Vestil FMDL Series fork mounted drum lifters use a heavy-duty single automatic clamping mechanism to handle steel, plastic and fibre-chimed drums effortlessly.
  • They can handle up to 2000 lb drums.
  • These drum lifters come in a bright yellow colour for easy identification in a crowded workspace.
  • They are made of steel for structural rigidity during high-volume applications.

Frequently Asked Questions

How to keep these drum lifters in optimum conditions?

  • On a monthly basis, inspect bolts, nuts, washers, pins and cotter pins to ensure they remain secure.
  • Examine all welds to ensure they are intact and free from defects.
  • Ensure that the structure is clean, square, rigid and free from rust and corrosion. Remove any dirt and debris.

What precautions should be taken when using Vestil fork-mounted drum lifters?

  • Never exceed the maximum rated load capacity specified on the product label or in the provided table.
  • Never stand or allow others to stand beneath any part of the lifter or beneath a suspended drum.
  • Avoid using the lifter to transport drums over rough, uneven or damaged terrain.

How do I attach a drum lifter to a forklift?

To attach a drum lifter to a forklift, align the lifter with the forklift's forks and drive the forklift forward until the forks engage with the lifter's pockets.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More