Sign In

EATON XR Series 80-Position Snap-In Jumpers

Eaton XR Series 80-position snap-in jumpers are electrical connectors consisting of 80 metal pins or sockets that can be inserted into a PCB (printed circuit board) to connect different components. ...Read More

Filter
StyleModelPrice
A
XRAFBST500GY
£65.08
RFQ
B
XRAFBST500BU
£65.08
RFQ
C
XRAFBST500RD
£65.08
RFQ

Working Mechanism

  • When the jumper is inserted into the PCB, the pins or sockets make contact with the pads or through holes.
  • The metal pins / sockets provide a low-resistance path for the electrical current to flow through.
  • The housing provides a secure and stable connection, preventing the jumper from moving or disconnecting.

Frequently Asked Questions

What is the standard pitch for 80-position snap-in jumpers?

The standard pitch for 80-position snap-in jumpers is typically 2.54 mm (0.1 inches).

Can I use 80-position snap-in jumpers for both power and signal connections?

Yes, these jumpers can be used for both power and signal connections.

How do I remove an 80-position snap-in jumper from a PCB?

To remove an 80-position snap-in jumper from a PCB, simply release the snap-in mechanism by pulling it out of the PCB. Pull the jumper by hand or use tweezers to grip the housing.

Can I use 80-position snap-in jumpers for high-frequency signal applications?

Yes, Eaton jumpers can be used for high-frequency signal applications.

We are here to help!

Looking for a part not listed here?