Sign In

EATON G Series Molded Case Switches, JG Frame

Eaton G Series molded case switches are used in industrial and commercial applications to provide safe and reliable connection / disconnection of electrical power from a circuit during overload and short circuit protection.

Filter
StyleModelPrice
A
JGK3250KSG
£5,447.60
RFQ
A
JGK3250KSGF01
£6,537.86
RFQ

Features

  • Eaton G Series molded case switches feature stainless steel terminals for corrosion resistance and durability.
  • They have an operating current and voltage rating of 250A and 600VAC, respectively.
  • These molded case switches are equipped with line & load with metric mounting hardware for securing the unit and mitigating the risk of loosening or falling.

Frequently Asked Questions

What is the installation process for Eaton G Series molded case switches?

  • Begin by turning off the power to the circuit. Then, remove the switch cover and mount it on either a DIN rail or a panel.
  • Proceed to connect the incoming and outgoing wires to the switch using the proper terminals.
  • Once done, replace the cover and turn on the power to the circuit.

What pole configuration do Eaton G Series molded case switches offer?

3 pole configuration.

How do I know if my Eaton G Series molded case switches needs to be replaced?

These molded case switches may require replacement if frequent tripping, visible damage, a burning odour or failure to reset after being tripped are noticed. Moreover, if the switch is outdated or no longer meets the latest electrical codes & standards, it may also need to be replaced.

We are here to help!

Looking for a part not listed here?