sales@raptorsupplies.co.uk WhatsApp 0203 287 5224
Sign In

EATON ECN33 Class Non-Combination Starters

Eaton ECN33 Class non-combination reversing starters are used to control the operation of electric motors. They have an enclosure for each component and a contactor & a thermal overload relay mounted in separate enclosures.

Filter
EATON ECN3311AAAA
StyleModelPrice
A
ECN3311AAA		£3,657.21
RFQ
A
ECN3321CAA		£6,527.74
RFQ
A
ECN3301CBA-C1		£5,242.61
RFQ
A
ECN3301EAA		£3,334.93
RFQ
A
ECN3308AAA		£4,201.69
RFQ
A
ECN3311EEA		£4,866.28
RFQ
A
ECN3321AAA		£6,493.70
RFQ

Features

  • They can be operated on three-phase AC power with a voltage range from 208 to 600V.
  • These starters come with silver-alloy contacts for high current capacity and prolonged service life.
  • They are equipped with auxiliary contacts for remote indication of the starter's status and use in control circuits.

Standards and Approvals

  • ABS
  • cUL
  • UL

Frequently Asked Questions

How to install these reversing starters?

  • Select a suitable enclosure for the contactor and overload relay based on application requirements and environmental factors.
  • Mount the enclosures in a location with appropriate clearances and using proper mounting hardware.
  • Wire the three-phase AC power supply to the line terminals on the contactor enclosure following the manufacturer's instructions for wire sizing and termination.
  • Wire the motor leads to the load terminals on the contactor enclosure following the manufacturer's instructions for wire sizing and termination.
  • Connect the control circuit wires to the auxiliary contacts on the contactor and overload relay enclosures as per the application requirements.
  • Test the starter to ensure proper operation and overload protection and troubleshoot any issues.
  • Label the starter with appropriate markings to identify the function of each terminal and control device.

How to maintain Eaton ECN33 Class starters?

  • Regularly inspect enclosures for damage or wear and repair or replace as needed.
  • Clean the starter regularly to remove dirt, dust, and debris.
  • Inspect contacts for signs of wear or damage and replace them if necessary.
  • Test the overload relay regularly to ensure correct function.
  • Lubricate moving parts as per manufacturer's recommendations.
  • Check wiring connections regularly to ensure they are tight and secure.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More