Sign In

EATON Danfoss SPC2-10 Series Check Valves

Eaton Danfoss SPC2-10 Series check valves are designed to allow fluid to flow in one direction only, preventing reverse flow and protecting sensitive hydraulic components. They are ideal for refuse haulers, harvesters and industrial applications.

Filter
StyleModelPrice
A
02-112759
£68.52
RFQ
A
565952
£68.52
RFQ

Working Mechanism

  • These check valve has an inlet and an outlet port with a spring-loaded poppet located between the ports.
  • When fluid flows in the forward direction, it pushes the poppet away from the inlet port, allowing the fluid to pass through the valve and out of the outlet port.
  • When the flow stops, the spring behind the poppet pushes it back to its original position, sealing the inlet port and preventing fluid from flowing back.

Frequently Asked Questions

What is check valve cracking pressure?

It is the minimum upstream pressure required to open a check valve.

How to select the right check valve?

When selecting a check valve, consider factors such as flow rate, pressure rating, temperature, fluid type and the size of the piping system.

What is the maximum working pressure of Eaton Danfoss SPC2-10 Series check valves?

210 bar.

What is the recommended filtration level of these SPC2-10 Series check valves?

They comply with the ISO filtration cleanliness code of 18/16/13 and prevent contaminants from entering the valve.

We are here to help!

Looking for a part not listed here?