Sign In

DAYTON Hazardous Location Centrifugal Pumps

Filter
Bearing Type: Ball , Duty: Continuous , Hazardous Location Class: 1 C,D / 2 E,F,G , Height: 9 1/16" , Housing Material: 316 Stainless Steel , Hz: 60 , Impeller Material: Stainless Steel , Impeller Type: Closed , Length: 15.125" , Max. Case Pressure: 150 PSI , Max. Dia. Solids: 1/8" , Max. Fluid Viscosity: 264 CP , Max. Liquid Temp.: 250 F , Max. Specific Gravity: 1 , Motor Enclosure: TEFC , Motor RPM: 3450 , Motor Type: Explosion Proof , Phase: 3 , Port Rotation: 90 Degrees Increments , Screw Material: Stainless Steel , Seal Application: Long life When not Run Dry or Pumping Abrasives , Seal Material: Viton Elastomer/Carbon Ceramic , Seal Type: Mechanical , Service Factor: 1.15 , Shaft Material: Stainless Steel , Suction Lift: N/A , Temp. Code: T3C , Type: Hazardous Location Pump , Voltage: 208-230/460 , Volute Material: Stainless Steel , Wetted Materials: Carbon/Ceramic, Viton, Stainless Steel , Width: 13"
StyleModelGPM of Water @ 40 Ft. of HeadAmpsBest Efficiency GPM @ HeadGPM of Water @ 50 Ft. of HeadGPM of Water @ 60 Ft. of HeadGPM of Water @ 70 Ft. of HeadHPInletPrice
A
5WXU8
614.09-3.72/1.8642 @ 50 Ft.422131.51-1/2 NPT£4,173.78
A
5WXU9
775.06-4.60/2.3049 @ 50 Ft.4918222 NPT£4,529.91

Hazardous Location Centrifugal Pumps

Dayton centrifugal pumps are designed to transfer and circulate liquids in chemical processing, cooling and pressure boosting applications. These continuous duty pumps are made from durable 316 stainless steel and have carbon, ceramic and Viton components to withstand the corrosive nature of liquids. They are powered by a TEFC, 3 phase motor in a 145TC for rotating shaft and producing a maximum flow rate of 49 GPM @ 50 feet. They are equipped with ball bearings for smooth operation and seals for preventing leakage. Choose between 1-1/2 and 2 HP power output variants on Raptor Supplies.

We are here to help!

Looking for a part not listed here?