Sign In

DAYTON Draft Booster Motors

Filter
Bearings: Ball , Body Dia.: 3.3" , Duty: Continuous Air Over , Enclosure: Open Air-Over , Frame: Non-Standard , Insulation Class: B , Max. Ambient Temp.: 40 Degrees C , Motor Enclosure Design: Open Air-Over , Motor Thermal Protection: Auto , NEMA/IEC Frame: Nonstandard , Phase: 1 , Service Factor: 1.0 , Thermal Protection: Auto
StyleModelRotationFull Load AmpsHPRPM RangeShaft Dia.Shaft LengthVoltageHzPrice
A
1D093
CCW1.3/0.651/301801-30001/4"3.75"115/23060£182.45
B
1D094
CCW2.2/1.11/151801-30001/4"3.75"115/23060£188.07
B
1D092
CW2.2/1.11/151801-30001/4"3.75"115/23060£198.27
A
3M895
CW1.71/253001-36005/16"1 5/16"11560£190.39
B
1D091
CW1.1/1.11/151801-30001/4"3.75"208-23060£203.93
C
1D089
CW/CCW0.61/91801-30001/4"3.75"23050/60£292.30

Draft Booster Motors

Dayton draft booster motors are used to power draft inducer fans inside a gas furnace and replace damaged draft booster motors in gas furnace heating systems. They feature an open air-over enclosure for cooling heated parts of the motor and are integrated with ball bearings for low rotational friction. These motors deliver speeds up to 3200 rpm and are available in 1/30, 1/25, 1/15 & 1/9 hp variants.

We are here to help!

Looking for a part not listed here?