Sign In

DAYTON 301 Series DC Gearmotors, TENV, 90VDC

Filter
Bearings: Needle Roller and Thrust Balls on Case, Ball on Motor , Brushes: Externally Replaceable , Enclosure: TENV , Full Load Amps: 0.62 , Gear Case: Die Cast Aluminum , Gear Material: Hardened Steel , Gear Type: Helical and Spur , Housing Material: Die Cast Aluminum , Input HP: 1/20 , Length Less Shaft: 8.625" , Lubrication: Permanent Heavy Fluid Gear Oil , Max. Ambient Temp.: 40 Degrees C , Motor Type: DC , Mounting: All Position , Overall Length: 10.125" , Overhung Load: 150 lb. , Replacement Brushes: 6YHY3 , Reversible Shaft Output: No , Rotation: Reversible , Seals: Spring Loaded Lip Type on Input and Output Shaft , Shaft Orientation: Parallel , Thermal Protection: None , Voltage: 90 VDC
StyleModelGear RatioMax. TorqueNameplate RPMRPM RangePrice
A
4Z131
17:127 in.-lb.109100 to 150£531.42
A
4Z132
35:155 in.-lb.5151 to 75£579.73
A
4Z133
53:182 in.-lb.3431 to 50£556.54
A
4Z134
101:1150 in.-lb.1816 to 30£589.76

301 Series DC Gearmotors, TENV, 90VDC

Dayton 301 Series DC gearmotors provide desired ratio and torque to run equipment using gear mechanism. These 90VDC rated gearmotors are ideal for running wheelchairs, hospital beds, table lifts and power seats. They consist of a motor, steel gears and bearings having die-cast aluminium TENV housing. The permanent magnet parallel shaft features ball bearings for smooth operation. They are permanently lubricated with fluid gear oil to prevent friction and damage to components. Spring-loaded lip sealing prevents ingress of contaminants. Choose from a wide range of these 301 Series gearmotors, available in speed ratings of 18, 34, 51 and 109 RPM on Raptor Supplies.

We are here to help!

Looking for a part not listed here?