Sign In

CHERNE Monitor Well Locking Plugs

Cherne Monitor Well Locking plugs offer a high-quality, petro-chemical resistant design to seal monitor wells.

Filter
Type: Mechanical
StyleModelNominal SizeRangeMax. Back PressureLengthMaterialPrice
A
271648
1" To 1.25"1" To 1.38"6.5 psi/15 ft.2.5"Plastic£28.17
A
271675
2"1.9" To 2.31"6.5 psi/15 ft.2.5"Plastic£32.28
A
271669
3"2.8" To 3.1"6.5 psi/15 ft.2.6"Plastic£34.97
A
271683
4"3.8" To 4.38"6.5 psi/15 ft.3"Plastic£38.40
A
271691
6"5.77" To 6.08"6.5 psi/15 ft.3.98"Plastic£82.90
A
271735
8"7.76" To 8.03"6.5 psi/15 ft.3.98"Plastic£186.81

Features

  • Cherne Monitor Well locking plugs are sized to seal schedule 40 piping.
  • They feature chemical / petroleum-resistant Estaloc plastic bottom and top plates.
  • They have a yellow chromate-coated locking latch that accepts Cherne's solid brass padlock or No. 2 Master padlock.
  • They feature a petroleum-resistant nitrile O-ring and stainless steel carriage bolt.

Standards and Approvals

  • EPA

Frequently Asked Questions

Where do we use a locking plug?

Locking plugs and connectors are mainly used by construction workers, contractors, welders and more.

What is the maximum back pressure of these Cherne Monitor Well Locking plugs?

These Monitor Well Locking plugs can withstand a maximum back pressure of 6.5 PSI (0.45 bar).

What are the nominal sizes available for these locking plugs?

These plugs are available in nominal sizes ranging from 1 to 8 inches.

We are here to help!

Looking for a part not listed here?