sales@raptorsupplies.co.uk WhatsApp 0203 287 5224
Sign In

CHERNE Clean-Seal Plugs

Cherne Clean-Seal plugs are installed on a PVC, ABS or cast iron tee for removing the backsplash of test water during stack testing of the drain, waste and vent (DWV) plumbing systems, keeping the ...Read More

Filter
CHERNE 271508A
Type: Pneumatic
StyleModelNominal SizeMax. Back PressureRequired Inflation PressureDeflated DiameterDeflated LengthPrice
A
271508		1.5"13 psi/30 ft.30 psi1.5"4.75"£56.46
A
271705		2"13 psi/30 ft.35 psi2.38"5.81"£47.86
A
271713		3"13 psi/30 ft.35 psi3.5"7.38"£58.78
A
271721		4"13 psi/30 ft.35 psi4.5"8.5"£75.51

Working Mechanism

  • Insert the plug into the pipe or application area by threading it into a standard test tee at a distance at least equal to the pipe diameter to prevent protruding of the plug.
  • Connect one end of the inflation hose to the plug inflation fitting (such as Schrader valve) and the other end to the line pressure, pump or another supply pressure device.
  • If another fitting is available, connect a pressure read-back hose to the fitting. The other end of the second hose should be connected to a calibrated gauge.
  • Block / brace the plug properly before inflating the plug. Inflate the plug to its rated inflation pressure through the inflation hose.
  • Stabilise the plug for a short moment before testing the pipe or application. After finishing the test or application, release all the back pressure & plug pressure until the plug is completely deflated.
  • Remove the blocking / bracing system before removing the plug from the pipe. Store the plug securely according to the storage instructions.

Features

  • Cherne Clean-Seal plugs can handle a maximum head pressure of 30 feet (9.1 metre) & maximum back pressure of 13 psi (0.9 bar).
  • Their natural rubber body with high-impact ABS threads provide a leak-tight seal & enhanced durability.
  • They can operate at temperatures ranging from 0 to 125 degrees F.
  • These plugs are inflated using air / gas pressurised at 30 psi (2.1 bar) or 35 psi (2.4 bar).
  • They are NPT-sized with nominal sizes ranging from 1.5 to 4 inches.

Compatible Accessories

  • Cherne Inflation - Read Back Hoses: These pressure read-back hoses work with these plugs for supplying a pressurised gas supply. They are equipped with gauges for precise inflation or deflation.

Standards and Approvals

  • ISO 9001
  • OSHA

Frequently Asked Questions

How to determine the size of the plug required?

Users should determine the pipe's internal diameter (ID) and then choose a plug according to the ID for the application.

What are the points to remember before installing these plugs?

  • Select a plug having the proper size according to the pipe size & design.
  • Always measure the maximum back pressure that the plug must withstand. Choose the plug accordingly.
  • Verify that the inside diameter of the pipe is within the plug's minimum and maximum sealing size range.
  • Calibrated gauges & appropriate hoses should be used to inflate or deflate the plugs.
  • Clean the pipe of any debris or foreign substance to reduce damage to the plug. Clean the plug with a mild soap & water without using any cleaning agent.
  • Check the plug for any crack, corrosion, cut, leaks or loose fittings by inflating the plug with 1 PSIG pressure after every use.
  • A backup system may be chosen to prevent injury in case of a plug failure.
  • A properly designed blocking or bracing device must be used to restrain any plug movement due to forces behind the plug.

How to store these Cherne Clean-Seal plugs?

These plugs must be stored in a dry place below 110 degrees F and away from sunlight & ozone or ultra-violet light sources.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More