Sign In

CH HANSON Pivot Square

C.H. Hanson 03060 pivot squares are used in carpentry and woodworking applications to mark / measure angles, make precise cuts and check the squareness of corners.

Filter
Finish: Matte , Number of Pieces: 1 , Use With: Framing
StyleModelBody SizeGraduationsItemMaterialPrice
A
03065
9.5"1/16"Resin Pivot SquareGlass, Nylon£29.99
B
03060
11 x 8"1/8"Pivot SquareAluminum£132.37

Pivot Square

CH Hanson pivot squares are designed to pivot to easily measure or mark angles. These squares feature a locking mechanism that sets the square at a specific angle for accurately marking repetitive cut lines in either degree or roof pitches. They are equipped with 3 UV resistant vials to determine roof pitches & angles, indicate grades, facilitate miter cuts and allow for leveling & plumbing cuts. These pivot squares come with an expert guide for roof construction and framing. They are available in 1/16 and 1/8 inch graduation variants.

Features

  • These squares feature a locking mechanism to set the square at a specific angle for marking repetitive cut lines in degree or roof pitches.
  • They come with 3 UV resistant vials to determine roof pitches & angles, facilitate mitre cuts, indicate grades and allow levelling & plumbing cuts.
  • These pivot squares are equipped with a technical guide for roof construction and framing.

Frequently Asked Questions

How do I use a C.H. Hanson pivot square?

To use a C.H. Hanson pivot square, simply align the edge of the square with the edge of the material you are measuring or marking, and use the built-in protractor to set the angle you need. The square can then be used to mark or measure at that angle.

How do you maintain a C. H. Hanson pivot square?

  • Clean and store it in a dry place when not in use.
  • The locking mechanism should be checked periodically and lubricated if necessary.
  • Check the accuracy of the square periodically and replace it if needed.

We are here to help!

Looking for a part not listed here?