ACORN ENGINEERING Tempering Valves

How do I install these Acorn tempering valves?

• Begin by shutting off the water supply to the installation area.
• Choose a suitable spot, often near the water heater, for installing this tempering valve.
• Cut the pipes cleanly and straight at the chosen installation points.
• Connect the valve to hot and cold water supply pipes using appropriate fittings as per the manufacturer's instructions.
• If applicable, set the adjustable set point to the desired water temperature.
• Ensure stability by securing the valve in place using recommended brackets or methods.
• Turn the water supply back on and carefully inspect for leaks around the valve and connections.
• Consider insulating pipes connected to the valve for improved temperature maintenance and energy efficiency.
• Turn on faucets or showers connected to the valve and check if the water temperature meets the desired range.
• Fine-tune the valve as needed to achieve the optimal water temperature.

What are the factors to consider while choosing tempering valves?

Major factors include application requirements, temperature range, flow rate, adjustability, compliance with standards, material durability, installation requirements, thermal expansion compensation and maintenance needs.

What safety precautions should I consider while using these tempering valves?

• Conduct routine inspections to check for leaks, corrosion or signs of wear and tear.
• Regularly monitor the output water temperature to ensure it stays within the desired and safe range.
• Adhere to the manufacturer's recommended maintenance schedule to keep the valves in optimal condition.
• Exercise caution when adjusting the set point to avoid sudden changes in water temperature that may cause discomfort or scalding.
• Seek professional assistance if unsure about the installation process to ensure correct and safe setup.
• Confirm that the tempering valves comply with industry safety standards and regulations.
• Install protective devices, such as temperature-limiting devices, to add an extra layer of safety.
• Ensure users are aware of how to operate and adjust the valves safely, especially in commercial or public settings.
• Have clear emergency procedures in place in case of unexpected issues with the tempering valves.
• Ensure the valves are securely installed to prevent accidental dislodging or damage.
• Understand how thermal expansion compensation works and take it into account when dealing with fluctuating water pressures.
• Clearly label the tempering valves & provide instructions for use in easily accessible locations.