TEXAS PNEUMATIC TOOLS Valve Accessories

Texas Pneumatic Tools main valves are used to control the flow rate and direction of compressed air from the incoming supply hose, by controlling the opening and closing time of various fluid lines. R-110208 main valves are used with CP-121 demolition tools. Selected models are ideal for automatic opening and closing of values according to predefined parameters.

Texas Pneumatic Tools throttle valve push pins are used to turn the spool of throttle valves when a current is passed through solenoid coils. The push pin turns the spool until the solenoid force is balanced by the spring return force. These throttle valves are used to fill the performance gap between conventional solenoid operated directional valves and servo valves / feedback-type proportional valves.

Valve covers from Texas Pneumatic Tools cover the valves of the engine, protect machinery from harsh conditions and prevent oil leaks. They are sealed with a cork or rubber seal to keep oil from leaking out.

Texas Pneumatic Tools push pins are used with proportional throttle valves to fill the performance gap between conventional solenoid operated directional valves and servo valves / feedback-type proportional valves. They combine direction and flow control capabilities in one package. These push pins are used to turn the spool of throttle valves when a current is passed through solenoid coils. The push pins turn the spool until the solenoid force is balanced by the return spring force.

Texas Pneumatic Tools valve chests regulate the flow of steam or air into the main engine cylinders or through the pneumatic tools. Raptor Supplies also offers front & rear valve chests to optimise valve chest assemblies for diverse operations.

Texas Pneumatic Tools valve seats act as a surface inside the body of a valve to restrict and allow flow through the valve. These valve seats feature an ergonomic design to create an airtight environment that facilitates proper functioning of a valve. These valve seats maintain the proper seal of a mounted valve. They reduce wear by resisting pressure and excessive heat.

Texas Pneumatic Tools lower valve blocks are used to completely stop the flow of liquids or gases through a pipe. They usually restrict flow but can also be used to change the direction of flow. These valves can either be manually operated or opened with a motorised assist (in case of large valves). These valve block assemblies and rear valve blocks are available on Raptor Supplies.

Texas Pneumatic Tools replacement valve handles are attached to throttle valves in rock drill machines. These handles help rotate the valves in both clockwise & counter-clockwise directions to open / close the valve and regulate the fluid (air, steam or gas) supply and pressure build-up.

Texas Pneumatic Tools throttle balls regulate the amount, pressure and temperature of media passing through a valve. They shut off the flow when the unit is rotated 90 degrees to block the flow passage.

Texas Pneumatic Tools valve guides are replacements for clay diggers used for light to medium soil / clay digging operations. Selected models feature one piece design for minimising wear over repeated usage, thereby reducing the downtime.

Texas Pneumatic Tools valve lids are designed to cover air valves and prevent unauthorised access to valve boxes. They ensure low opening pressure and fast closure, in case of backpressure. The durable iron construction can withstand high-pressure applications.

Texas Pneumatic Tools pneumatic valve assemblies include all peripheral devices required to run the valve mechanism for controlling and directing the flow of compressed air. These valve assemblies include lower & upper valve case lids and bushings.