Helical Thread Insert Tools - Page 6 | Raptor Supplies United Kingdom
sales@raptorsupplies.co.uk WhatsApp 0203 287 5224

Helical Thread Insert Tools

Filter

Raptor Supplies offers a complete line of thread insert tools from Chrislynn, Helicoil, Recoil and ...Read more

MARSON -

Rivet Nut Tool

Rivet Nut Tool
ModelItemPrice (inc. VAT)
39200AE4CYF£138.55
GRAINGER -

Head Set 6-32 2.5 Inch FLEX-5P/S

Head Set 6-32 2.5 Inch FLEX-5P/S
ModelItemPrice (inc. VAT)
FL5-HS-1032AH3HMU£171.39
APPROVED VENDOR -

Power Driver 1/4" Hex

Power Driver 1/4
ModelItemPrice (inc. VAT)
4ZE55AE2RJY£31.19
APPROVED VENDOR -

Insert Install Tool Size 8-32

Insert Install Tool Size 8-32
ModelItemPrice (inc. VAT)
5XA39AE7DQU£58.19
APPROVED VENDOR -

Power Driver 3/8" Hex

Power Driver 3/8
ModelItemPrice (inc. VAT)
4ZE59AE2RKA£28.01
GRAINGER -

Hand Tool 55mm M4 Flex-5p/s

Hand Tool 55mm M4 Flex-5p/s
ModelItemPrice (inc. VAT)
FL5-HS-M4AG2TYP£207.58
GRAINGER -

M Head Set 2.50 Inch 3/8 - 16 M4/m5

M Head Set 2.50 Inch 3/8 - 16 M4/m5
ModelItemPrice (inc. VAT)
MHS-3716AG2UBE£54.11
MARSON -

Heavy Duty Thread Setting Tool

Heavy Duty Thread Setting Tool
ModelItemPrice (inc. VAT)
325-RNAD6VWW£574.57
HELICOIL -

Tanged Mandrel, 10-32 Thread Size

Tanged Mandrel, 10-32 Thread Size
ModelItemPrice (inc. VAT)
10089-3CH3XUN£188.17
GRAINGER -

Hand Tool 17.0 Inch M4

Hand Tool 17.0 Inch M4
ModelItemPrice (inc. VAT)
M4 INCH HAND TOOLAG2UAT£847.61
CHRISLYNN -

Spring Loaded Tang Break Off Tool

Spring Loaded Tang Break Off Tool
ModelItemPrice (inc. VAT)
TBA-2.5AAG9BYJ£78.78
MARSON -

Mandrel/Nosepiece Set, Metric Steel

Mandrel/Nosepiece Set, Metric Steel
ModelItemPrice (inc. VAT)
34613AA9CUZ£126.09
APPROVED VENDOR -

Power Driver 3/8" Hex

Power Driver 3/8
ModelItemPrice (inc. VAT)
4ZE56AE2RJZ£33.15
GRAINGER -

Hand Tool 40mm M3 Flex-5p/s

Hand Tool 40mm M3 Flex-5p/s
ModelItemPrice (inc. VAT)
FL5-HS-M3AG2TYN£208.33
GRAINGER -

Hand Tool 55mm M4 Rnht

Hand Tool 55mm M4 Rnht
ModelItemPrice (inc. VAT)
RNHT-M4AG2UBZ£112.77
HELICOIL -

Stud-Lock Thread Insert Tool, 3/8-24 Thread Size

Stud-Lock Thread Insert Tool, 3/8-24 Thread Size
ModelItemPrice (inc. VAT)
5552-6CH3XUU£1,953.93
See Details
HELICOIL -

Cordless Electronic Installation Tool Kit

Cordless Electronic Installation Tool Kit
ModelItemPrice (inc. VAT)
7200CH3XUV£1,576.56
See Details
GRAINGER -

Hand Tool 7.60 Inch M5

Hand Tool 7.60 Inch M5
ModelItemPrice (inc. VAT)
M5 INCH HAND TOOLAG2UAV-
RFQ
1...56

Helical Thread Insert Tools

Raptor Supplies offers a complete line of thread insert tools from Chrislynn, Helicoil, Recoil and Grainger. We also offer a wide range of insert installation tools, STI plug taps, tang breaking tools and bushings for installing threaded inserts into a pre-drilled hole. Steel power drivers in different hex shank sizes are also available for installing self-locking or knife thread inserts.

Frequently Asked Questions

How to install helical inserts?

  • Drill a hole using the suggested drill bit size.
  • Tap the hole, then screw the insert into the installation tool. The prong must be properly engaged in the driving contour of the tool.
  • Using the installation tool, thread the insert into the hole. Install the insert a quarter to half turn below the hole's surface.
  • If your insert has a prong, remove it with a punch or break-off tool. Remove the prong to allow your screw to fully enter the insert.

Why break the tang on a Helicoil?

If the tang is not properly removed, the hole might get compromised and the male fastener will not be able to pass through. Browse through our catalogue to find the right tang break-off tool for your needs.

What is the use of a mandrel?

A mandrel is a piece of metal that is used to support a partially machined workpiece while it is being finished, or as a core around which parts can be bent / forged / moulded.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More