Push Nuts and Retainers | Raptor Supplies United Kingdom
sales@raptorsupplies.co.uk WhatsApp 0203 287 5224

Push Nuts And Retainers

Filter
APPROVED VENDOR -

Cap Nut Steel Plastic

APPROVED VENDOR 4CUJ2A
StyleModelHeightStud SizePrice (inc. VAT)
A4CUJ20.44"5/16"£18.90
A4CUJ10.44"1/4"£19.68
A4CUJ40.44"7/16"£8.13
A4CUJ30.46"3/8"£19.01
A4CUJ50.645"1/2"£9.33
A4CUJ60.645"5/8"£9.67
DIXON -

True ID Flange Retainers

DIXON FRRE-T12A
DIXON FRR-T08B
StyleModelPrice (inc. VAT)
AFRRE-T12£374.26
RFQ
AFRRE-T16£551.68
RFQ
AFRRE-T20£996.36
RFQ
AFRRE-T24£671.42
RFQ
BFRR-T08£111.87
RFQ
BFRR-T12£133.76
RFQ
BFRR-T16£168.46
RFQ
BFRR-T20£363.66
RFQ
BFRR-T24£329.92
RFQ
BFRR-T32£586.03
RFQ
TEXAS PNEUMATIC TOOLS -

Quick Change Retainers

Texas Pneumatic Tools quick-change retainers provide a solid chuck to securely grip bits into the barrel of an air-powered hammer while allowing tool-free bit changes. These units feature a spring-loaded collar that slides back to release the bits. They thread onto the hammer barrel for quick installation.

TEXAS PNEUMATIC TOOLS 1192-SUL2A
TEXAS PNEUMATIC TOOLS 1291-APT2B
TEXAS PNEUMATIC TOOLS 4188C
TEXAS PNEUMATIC TOOLS 1291-ROT2D
TEXAS PNEUMATIC TOOLS 1291-JET2E
TEXAS PNEUMATIC TOOLS 1291-IRC2F
TEXAS PNEUMATIC TOOLS 1291-CPT3G
TEXAS PNEUMATIC TOOLS 1192-IRC2H
TEXAS PNEUMATIC TOOLS 1192-1.942I
TEXAS PNEUMATIC TOOLS 9119J
TEXAS PNEUMATIC TOOLS 1291-SUL2K
TEXAS PNEUMATIC TOOLS 1291-CLE2L
TEXAS PNEUMATIC TOOLS 1291-1.970M
TEXAS PNEUMATIC TOOLS 1291-1.755N
TEXAS PNEUMATIC TOOLS 1291-1.942O
TEXAS PNEUMATIC TOOLS 1291-1.692P
TEXAS PNEUMATIC TOOLS 1291-TPT2Q
TEXAS PNEUMATIC TOOLS 1291-MPT2R
TEXAS PNEUMATIC TOOLS 1291-CLE4S
StyleModelPrice (inc. VAT)
A1192-SUL2£91.78
RFQ
B1291-APT2£128.67
RFQ
C4188£128.67
RFQ
D1291-ROT2£128.67
RFQ
E1291-JET2£128.67
RFQ
F1291-IRC2£128.67
RFQ
B1291-CPT4£128.67
RFQ
G1291-CPT3£128.67
RFQ
B1291-ATS1£128.67
RFQ
H1192-IRC2£91.78
RFQ
I1192-1.942£91.78
RFQ
J9119£88.10
RFQ
K1291-SUL2£128.67
RFQ
L1291-CLE2£128.67
RFQ
M1291-1.970£128.67
RFQ
N1291-1.755£128.67
RFQ
O1291-1.942£128.67
RFQ
P1291-1.692£128.67
RFQ
A1192-CPT4£91.78
RFQ
K68780341£128.67
RFQ
Q1291-TPT2£128.67
RFQ
R1291-MPT2£128.67
RFQ
R1291-GD2£128.67
RFQ
S1291-CLE4£128.67
RFQ
A1192-IRC4£91.78
RFQ
See more
VULCAN HART -

Retainers

VULCAN HART 00-412691-000G1A
VULCAN HART 00-944144B
VULCAN HART 00-958551-00002C
VULCAN HART 00-353484-00001D
VULCAN HART 00-854564-00001E
StyleModelHeightLengthWidthPrice (inc. VAT)
A00-412691-000G1---£247.41
RFQ
B00-944144---£2.41
RFQ
A750029---£20.92
RFQ
A706007---£30.48
RFQ
C00-958551-00002---£2.37
RFQ
A750029-2---£48.60
RFQ
A753077-A---£242.63
RFQ
A00-857976-00003---£314.98
RFQ
A00-414369-00001---£40.90
RFQ
A00-492784---£194.94
RFQ
A00-493545---£117.65
RFQ
A00-881625---£76.49
RFQ
D00-353484-000010.55"2.45"4.9"£74.77
RFQ
E00-854564-000011.55"3.8mm3.9"£165.30
RFQ
APPROVED VENDOR -

Cap Nut Washer Steel 3/8 Inch, 50PK

Cap Nut Washer Steel 3/8 Inch, 50PK
ModelItemPrice (inc. VAT)
228873004AD6ZMV£23.21
DISCO -

Nut, Thread Cutting, 20mm Width, 8mm Height, 100Pk

Nut, Thread Cutting, 20mm Width, 8mm Height, 100Pk
ModelItemPrice (inc. VAT)
1622PKAD3PBE£34.98
GRAINGER -

Push On Cap Nut, Sae 1050-1065 Steel, External Type, 50PK

Push On Cap Nut, Sae 1050-1065 Steel, External Type, 50PK
ModelItemPrice (inc. VAT)
230982004CG9WBT£11.73
APPROVED VENDOR -

Cap Nut Washer Steel 5/8 Inch, 25PK

Cap Nut Washer Steel 5/8 Inch, 25PK
ModelItemPrice (inc. VAT)
PW625019-598AD6ZMY£22.17
APPROVED VENDOR -

Cap Nut Washer Steel 1/4 Inch, 100PK

Cap Nut Washer Steel 1/4 Inch, 100PK
ModelItemPrice (inc. VAT)
228911004AD6ZMT£23.90
DISCO -

Nut, Thread Cutting, 18mm Width, 7mm Height, 50Pk

Nut, Thread Cutting, 18mm Width, 7mm Height, 50Pk
ModelItemPrice (inc. VAT)
1042PKAD3PBD£12.55
DISCO -

Nut, Plastic, 16mm Width, 10mm Height, 50Pk

Nut, Plastic, 16mm Width, 10mm Height, 50Pk
ModelItemPrice (inc. VAT)
1228PKAD3PAT£9.74
DISCO -

Nut, Thread Cutting, 15mm Width, 6mm Height, 50Pk

Nut, Thread Cutting, 15mm Width, 6mm Height, 50Pk
ModelItemPrice (inc. VAT)
1041PKAD3PBC£12.80
DISCO -

Nut, Nylon, 9mm Width, 8mm Height, 50Pk

Nut, Nylon, 9mm Width, 8mm Height, 50Pk
ModelItemPrice (inc. VAT)
1577PKAD3PAF£12.23
APPROVED VENDOR -

Cap Nut Steel Plastic 3/16 Inch, 25PK

Cap Nut Steel Plastic 3/16 Inch, 25PK
ModelItemPrice (inc. VAT)
4CUH9AD6ZPL£17.85
VULCAN HART -

Rear Retainer Rod

Rear Retainer Rod
ModelItemPrice (inc. VAT)
716922AU4VXG£108.17
See Details
VULCAN HART -

Tank Retainer Bracket

Tank Retainer Bracket
ModelItemPrice (inc. VAT)
701644AU3ZRF£2.99
See Details
VULCAN HART -

Retainer Rack Guide Shelf

Retainer Rack Guide Shelf
ModelItemPrice (inc. VAT)
00-959653-00001AP6FFK£17.73
See Details
VULCAN HART -

Pan Retainer Channel

Pan Retainer Channel
ModelItemPrice (inc. VAT)
750052-AAU6EAB£451.59
See Details
PS DOORS -

Pushnut, 7/16 Inch Dia., 7/8 Inch Size, Powder Coated Yellow

Pushnut, 7/16 Inch Dia., 7/8 Inch Size, Powder Coated Yellow
ModelItemPrice (inc. VAT)
513576CE8UUP-
RFQ
PS DOORS -

Chain Retainer

Chain Retainer
ModelItemPrice (inc. VAT)
513003CE8UYG-
RFQ

Push Nuts And Retainers

Push nuts and retainers protect against loosening or slipping and provide an aesthetic look to the protruding / exposed ends of threaded nuts, fasteners or bolts. These washers feature plastic / steel construction with 6 point contacts which align with the shaft circumference, ensuring maximum holding power and resistance against excessive vibration, increased torque, heat or corrosion. Texas Pneumatic Tools quick change retainers secure flat chisels and other attachments compatible with pneumatic hammers and are ideal for cutting metals, concrete or similar materials. These units can easily remove or exchange tools by pulling or releasing the sleeve. These products are available in black phosphate and zinc finish variants on Raptor Supplies.

Frequently Asked Questions

What are some points to remember while installing push nuts and retainers?

  • The threaded fastener should have appropriate diameter tolerance. Shafts having tight shaft diameter tolerance are supplied with the required holding force by the push nut.
  • The rod should have adequate hardness (without exceeding a fixed value) to allow the locking teeth to dig in.
  • The shaft cutoffs should be rounded or chamfered for quick installation of the push retainer.

What are the differences between push-on retainers and washers?

  • Washers are ideal for distributing the load from a fastener whereas push-on retainers are suitable for preventing fasteners from loosening or slipping in assemblies.
  • Generally, washers are shaped flat. Push-on retainers are not necessarily flat and may have teeth or grooves on one of their sides to resist the motion of a fastener.

We are here to help!

Looking for a part not listed here?

Chat with us now

Explore More