Pneumatic Control Accessories

Texas Pneumatic Tools retainer buffers reduce damage in the buffer tube, under spring tension. These units feature 17-4 stainless steel bar stock, heat treated to H900 hardness for reliable performance in harsh working conditions.

Texas Pneumatic Tools plunger springs are designed to close valve openings and prevent backflow. They counter the force applied by solenoid coils when current is passed through them. The valve opens if the coil force is greater than the spring recoil and closes when the solenoid force reduces. These springs are ideal for deciding the flow rate of compressed air passing through valves.

Texas Pneumatic Tools pistons are used to replace damaged or old pistons to maintain the efficiency of compressed-air tools. These pistons are powered by compressed air and can handle high-speed cycles for powering air tools and their attachment heads.

Texas Pneumatic Tools jumbo back out punches are used for driving fasteners such as dowels & nails, making a hole, or forming an impression or indentation on the tip on workpieces. These punches are suitable for structural steel work and have a long piston stroke to deliver a powerful blow for concrete removal and bridge demolition.

Texas Pneumatic Tools oil felts are used as oil or grease seals for retaining lubrication and preventing dirt or dust from entering the bearing. These oil felts are made of NBR to offer excellent tensile strength, improved finish & enhanced waterproofing. They feature wicking and oil absorption properties for fine filtring & resilience.

Texas Pneumatic Tools jumbo upper sleeves are suitable replacements for damaged sleeves in rivet buster tools used for demolition applications. They feature one piece design for impact strength and selected models feature steel construction for high abrasion resistance in corrosive environments.

Texas Pneumatic Tools rivet buster lower sleeves protect percussion tools from the adverse effects of vibrations. Selected models are available in a split design for use with standard or jumbo chisels with sizes beyond 24 inches that are, otherwise, unable to snap in through the big-front retainer opening.

Texas Pneumatic Tools exhaust or muffler deflectors are shields installed at exit ports of the pipes to direct engine exhaust fumes towards particular directions. They include single-piece housing with outlet walls for outlet apertures, flanges to define inlet apertures and intermediate walls to interconnect both.

Texas Pneumatic Tools rivet busters are compressed air powered pneumatic tools, used to cut & drive metal rivets by breaking the concrete surface. They are ideal for road & bridge repair work, railroad car repair, metal tank demolition and mixing tank cleaning. Rivet buster pistons are made of steel and are used to drive & produce oscillating motion of the hammer. Rivet busters have positive retention of the piston to prevent injuries and a built-in barrel bridge for safety.

Texas Pneumatic Tools back-out punches drive out rivets, bolts & pins in electric and plumbing applications. They are suitable for operations where precise & smooth holes are needed and feature heat treated heads for high tensile strength. These punches are ideal for 5/8, 3/4, 7/8 or 1 inch rivet diameters, available in overall sizes of 5/8 and 9 inches.
Raptor Supplies also offers Texas Pneumatic Tools Jumbo Back Out Punches, ideal for 3/4, 7/8, 1/2 and 1 inch rivets.

Texas Pneumatic Tools sand rammers are designed to compress and compact soil for uniformity. The brand's packing assemblies provide sealing in sand rammers to prevent dust and dirt from entering inside. Choose from a wide range of front, middle and rear packings on Raptor Supplies.

Texas Pneumatic tools replacement parts, rivet buster sleeves are suitable for use with oversized diameter bores and tapered bores in pneumatic 1500 Series and 2000 Series chisel tools.