Parts

Texas Pneumatic Tools dowel pins are ideal for joining and keeping machine components aligned. These cylindrical pins are made of hardened steel to provide superior tensile strength and prevent shattering of pins under high stress. They feature a chamfered end for easy insertion into reamed holes. The brand's long pins allow damaged holes to open wider and accommodate new pins; can easily fasten onto softer materials or oblong holes.

Texas Pneumatic Tools spring retainers attach chisel bits to the barrel of a compatible air-powered hammer. These units provide a friction fit to securely hold chisels on an air-powered hammer and feature metal coils that twist onto the hammer barrel. They hold the chisel bits in place to prevent them from flying off the tool during use.

Texas Pneumatic Tools side rod kits are suitable replacements for worn out parts in paving breakers used for demolition applications. These kits include fronhead bolt springs, hex nuts, lock washers and bolts.

Texas Pneumatic Tools square head plugs attach at the ends of pipes, shafts, tubes or connectors and provide safety in high-pressure air, water and natural gas systems. These threaded square plugs are made of high-quality metal for a steady performance and high thermal resistance. They further feature a galvanised zinc plating for rust protection and a simple design that requires little maintenance. Raptor Supplies offers an array of these hydraulic plugs in 1/4, 3/4, 3/8 and 1 inch sizes.

Texas Pneumatic Tools corrosion-resistant, galvanised pipe nipples are ideal for connecting two male or female fittings and transfer water, air, oil, steam or natural gas in low-pressure plumbing applications. They are configured with thread connections to provide an excellent watertight seal when connecting piping to other fittings, equipment or valves and are available in thread sizes of 1-1/2, 1/2, 3/4 and 1 inches.

Texas Pneumatic Tools lock nuts keep the fasteners from loosening under constant vibration, excessive pressure or torque. These nuts firmly grasp the bolt threads and provide extra friction to resist unwinding and are also called reversible lock nuts as they can be fastened on the bolt from either side. Some of the lock nuts are hex shaped with higher torque capabilities and are specifically designed for parts exposed to excessive jerks.

Texas Pneumatic Tools center plates fit in between the upper and lower valve blocks in a backfill tamper tool to provide support and allow rotary movement with respect to the body of the tool.

Texas Pneumatic Tools retainers provide a friction fit to hold chisels on an air-powered hammer. They feature a solid chuck design that securely grips bits into the barrel of an air-powered hammer while allowing tool-free bit changes. They thread onto the hammer barrel and have a spring-loaded collar that slides back to release the bits.

Texas Pneumatic Tools bolts are used for holding objects / materials together, or positioning objects. These metal fasteners offer structural rigidity and corrosion resistance. They comprise a head at one end & a chamfer at the other end, and have a shaft with an external helical ridge.

Texas Pneumatic Tools paving breakers are used to demolish concrete pavements for construction, renovation and repair work. They feature a T-shaped handle with a comfortable grip for reducing operator fatigue and a lever throttle for operation. These paving breakers are connected to the air supply hose via a swivel connector for easy manoeuvrability in all directions.

Texas Pneumatic Tools roll pins are used to fasten one shafts or flat faces of mating parts together. These pins are considered self-retaining fasteners owing to the force exerted by them against the hole they are placed in.

Texas Pneumatic Tools backhead bolts offer strong clamping force with the combination of nuts to create a strong bolted joint between the backhead and the driver chunk in tools like hammer drill. These units come with hexagonal heads that can be rotated from any angle for loosening or tightening in tight spaces with the help of a wrench. When mated with the compatible nuts, these bolts provide extra friction to resist unwinding due to external forces. Selected models come with nut and washer assembly for equally distributing the load of bolt and preventing self loosening due to vibrational effects.

Texas Pneumatic Tools needle springs are suitable replacements for worn out springs in scaling hammers used for cleaning castings, welding slags and de rusting metals. They have one piece construction that offers durability and prevents the spring from loosing tension over time.

Clamping screws from Texas Pneumatic Tools feature a full ball point contact for workpiece fixing and positioning. These screws feature threads in the form of a helix to allow transmission of lateral movement along the axis of the screw.

Texas Pneumatic Tools handle grips are easy to install and feature a non-slip rubber coating for easy gripping. They reduce the risk of injury to hands and wrists.

Texas Pneumatic Tools vacuum tube attachmentss for TX182 scaling hammers are used to collect dust and debris produced during operation. They include hoses and clamps for easy mounting. Choose from a wide range of these vacuum attachments, packed in a protective case.

Texas Pneumatic Tools replacement air tool filters are used to remove contaminants from compressed air (post compression), which might cause damage to internal components. They have a hex-shaped design with outer threads for easy installation and are available in male & female thread variants.

Texas Pneumatic Tools drill handles provide the leverage needed for controlling powerful drills. These drill handles feature an ergonomically designed grip to allow long hours of work. They make it easier to balance and manage heavy drills.

Texas Pneumatic Tools hardware assemblies include nuts, screwed securely onto the associated bolts for quick access at the time of need. The alloy steel forged units provide durability and added strength to the units. These threaded bolts create a positive engagement with the nuts when a rotational force is applied to them and prevent loosening or misplacement of components during storage, transit or operation.

Texas Pneumatic Tools air inlet screens provide long-lasting, weather-resistant & easy-clean external mesh filters to fit air handling units, blowers, fans, dry air coolers and air conditioning units. They stop debris such as pollen, leaves, insects, litter or other air contaminants from entering through the air inlets and clogging coils and internal components of the electrical equipment.

Texas Pneumatic Tools bolt retainers are designed to keep bolts & screws in place, in HVAC, automotive, construction and electrical applications. They feature a one-piece design to eliminate the need for multiple small parts, thereby reducing inventory space. They have inner teeth that bite onto the bolts or screws to ensure a secure, vibration-free connection.