STENS Parts

Comprises high-quality fuel / air / oil filters, bump feed heads, edger / lawn mower blades, closed spoons, engine stop switches, gas / fuel caps, kill-button switches, interlock switches and spec belts

Stens trimmer heads are designed to fit straight-shaft string trimmers and release small sections of string, under high whipping force, to easily cut through weeds, grass and tough overgrowth. Selected models have large bottom covers that tap on the ground to advance the string line and allow the head to glide easily while trimming (making precise cuts each time). They feature inner walls that resist accumulation of dirt particles, and split eyelets for an extended service life. These units are compatible with Ariens, Dolmar, Echo, Homelite, Honda, Husqvarna and Makita trimmer lines.

Stens mower blades are the cutting or trimming components of lawn mowers in agricultural applications. They feature sturdy materials to withstand high speed contacts and have a rounded center hole design for fitting bolts. Further, these blades are offered in standard and notched types for cutting tall and hard-to-lift grasses, respectively. Choose from a broad range of these mower blades available in medium-duty, heavy-duty and hi-lift application types.

Stens replacement mulching blades are suitable for cutting finer grass clippings that can be then left back on the ground to decompose and be used as natural fertilisers. These blades feature a curved design with an enhanced cutting edge that helps to cut the grass and take it back to the deck for several mulching operations. This saves the time taken during collection & transport of the freshly cut clippings and promotes a clear and well-trimmed landscape. Choose from a wide range of these lawn mower blades available in lengths ranging from 19.375 to 21.5 inches.

Stens OEM spec belts having width of 9/16 inch are designed for clutching actions in toro, tractors or wheel horses in drive applications. They feature raw edged or multi-ribbed belt types for dust & abrasion resistance and can be used under severe load fluctuations. Choose from a wide range of these spec belts, available in lengths of 33, 34 and 64 inches.

Stens interlock switches allow current to pass to the machines when they are safe to operate and prevent the start of machinery when the guards are open. They feature 2 or 4 terminal connectors for direct connection to the equipment in electrical applications and have double pole sockets to control two separate circuits, thereby ensuring safe isolation of the load circuit. Further, these switches come with normally open or normally closed types for off & on functions, respectively.

Stens gas caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. Choose from a wide range of these gas caps, available in outer diameters ranging from 1-3/16 to 2 inches.

Stens engine stop switches manually stop or shut off the power passing to the engines and are compatible with selected Honda engine models. They feature plates that include on / off indicators to start or shut down the engines and are configured with 3/4 inch mounting stems for easy installation.

Stens OEM spec belts with 3/8 inch width are suitable for clutching actions in toro, tractors or wheel horses in outdoor drive applications. They feature raw edged / V belt / cogged or multi-ribbed belt types for dust & abrasion resistance, as well as can be used under severe load fluctuations while minimising shock & vibration. Choose from a broad range of these belts, available in lengths of 22, 25, 29, 33 and 34 inches.

Stens replacement edger blades are designed to make crisp edges on the lawn against a sidewalk, curb or walkways; providing an appealing landscape. These 8-inch-long blades are made of high-grade steel with the facility of easily replacing dull or worn blades from time to time. Selected models feature heat-treated steel construction with a black paint coating for durability. They are available in 0.120, 0.125 and 0.098 inch thickness options.

Stens edger blades are compatible with ECHO edge trimmers / lawn edgers to neatly trim the edges of sidewalks, walkways or curbs around the grassy lawns. These 9-inch-wide blades are made of high-strength steel and feature sharpened edges on both sides (selected models) for cleaner & crisper lines, as compared to notched blades. Choose from a wide range of these replacement edger blades available in 1/2 and 5/8 inch center hole diameters.

Stens lawn edger blades are ideal for trimming grass, removing weeds and giving a sharp edge around flower beds, gardens and grassy landscapes. These 10-inch blades are made of high-strength steel and can be easily installed on lawn trimmers to replace worn or broken blades. Selected models feature sharpened edges on all the four sides to create a beveled edge (i.e., trimming the lawn at an angle); ideal for handling the perimeter of delicate flower beds. Choose from an array of these edger blades available in sharpened, smooth and angle-beveled blade edge options.

Stens transmission filters remove particles and contaminants from the transmission fluid and have anti-drain valves to allow oils to drain back into the engine. They are integrated with threads to permit required related accessories to be attached. The valves can operate at pressures ranging from 8 to 22 psi. Choose from a broad range of these transmission filters, available in 10 and 16 micron ratings for fine removal of particles.

Stens replacement trimmer head spools serve as a string feeder for cutting easily through tough overgrowth. These spool heads make a whipping action to generate a powerful centrifugal force that makes precise cuts. These units are pre wound and can be easily replaced within seconds. These spool heads are bump feed type which means they release the string when the bump head is pressed to the ground, giving advantage to the operator to trim the lawn and eliminate the need for turning off the machine where work is not required. They are fit for use with 2- & 4-prong head configurations.

Stens Star Edger blades are ideal for edging lawns running parallel to retaining walls or solid barriers. These non-sharpened blades are made of high carbon steel that is further heat treated for resisting bends, breakages and fractures, as well as for maximum durability. They feature 4-point edges to keep the hedges & shrubbery under control. These units can also be used as lawn aerators for making aerating holes before fertilising the lawns or spreading grass seeds. They are compatible with Trail Mate and Lesco edgers with a 9 inch outer diameter.

Stens ignition switches are suitable for activating the main electrical system of a vehicle and actuating four functions - unlocking the steering wheel, switching on the electrical power and activating the power windows and seats. These mechanical switches are combined with an immobiliser to start the switch functions only when the key is inserted into the switch and a unique transponder signal is detected. When the transponder code in the key matches with the ones programmed in the vehicle, the engine is activated. Choose from a broad range of these starter switches available in magneto and battery type ignition options.

Stens carburetors are used to replace damaged or faulty carburetors in engine blocks of gardening & lawn equipment and other machinery. They create an air-fuel mixture of varying concentrations for facilitating internal combustion inside an internal combustion engine. These carburetors vary depending engine size & air intake capacity and can handle fuel with a maximum of 10 % ethanol.

Stens tygon fuel lines maintain air tight seals on fittings in extreme temperatures. They feature clear yellow colour having translucent material for allowing visual inspection of media flow and come in 50 inch length. Further, these oil & gas resistant pipes prevent swelling & hardening and are used in small engine fuel lines, lubrication lines & recreational vehicles.

Stens fuel caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dusts & contaminants from going in to cause engine problems. They also help in increasing fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. Choose from a wide range of these gas caps, available in white and black colours for replacing fuel caps of different equipment.

Stens fuel caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. Selected models feature twist close & vented shutoff option for quick closing of the caps & pressure release from the tanks, respectively.

Stens fuel caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. These plastic caps feature threaded design for a liquid-tight seal and a fuel gauge to indicate the fuel level for timely refilling the fuel tanks. Choose from a wide range of these gas caps for fitting fuel tanks with depths ranging from 5 to 9 inches.

Stens fuel filters replace worn out and faulty filters to increase fuel efficiency of gardening & lawn equipment and other machinery. They protect the engines and other components from wearing out by filtering out dirt, rust particles & other contaminants from the fuel. These filters generally contain filter papers made into cartridges for supplying fuel to internal combustion engines through fuel lines. They can handle fuel with a maximum of 10 % ethanol. Choose from a wide range of these fuel filters, available in outer diameters ranging from 9/16 to 3/4 inches.

Stens inner air filters remove dirt & debris from entering the engine for improved functioning of the lawnmower systems. They feature battery-powered sources, thereby providing a long time operation and environment-friendly performance.

Stens OEM spec belts are used to replace broken or worn parts and for clutching actions in landscape & gardening applications. They can withstand high loads, vibration, shock & environmental exposures and are available in cogged, covered, double V, raw edge, banded and multi-ribbed belt variants having length up to 190 inches.

Stens replacement notched blades are ideal for cutting heavy crop residue or tough vegetation while plowing rocky soils. These straight-notched blades feature serrated edges for flawless trash cutting and deeper penetration, as compared to smooth-edged blades which sometimes skid over meaty roots in hard soil environments. Selected models have a high-lift design to facilitate improved air suction (lifting) & bagging (collecting) of grass clippings. They are ideal for use on tall & thicker grasses and are available in 16.375, 16.5, 17.5, 18 and 21 inch lengths.

Stens air filter combos help engines to run efficiently for a long time by blocking many contaminants such as dirt, pollen, insects & dust in small engine outdoor power equipment. They allow sufficient amounts of air to flow through the system and feature exact-fit design, thereby ensuring high-level protection for the engines & easy installation of the filters. Choose from a wide range of these combos, available in lengths up to 8 inches.

Stens PTO ( power take-off ) switches replace worn-out or faulty PTO switches in garden & lawn equipment. They transfer mechanical power of the engines to the attached equipment that do not have their own engines or motors like rotating cutting blades in lawnmowers. These switches feature either the push-pull mechanism with a snap mount or a 1/2 inch mounting stem for controlling the switches. Choose from a wide range of these switches, available in 2-position 5-terminal and 2-position 8-terminal variants.