Parts

Dayton replacement shafts are used to change damaged or worn out shafts of Dayton pressure pumps to provide continuous operation and reduced downtime.

Dayton totally enclosed motors are used with the brand's 3E229A, 3E229B, 3E242A, 3E242B, 3E370A, 3E370B, 3E383A and 3E383B unit heaters. They provide a maximum speed of 1200 rpm and are available in 1/3 & 1/10 hp variants.

Stens replacement trimmer head spools serve as a string feeder for cutting easily through tough overgrowth. These spool heads make a whipping action to generate a powerful centrifugal force that makes precise cuts. These units are pre wound and can be easily replaced within seconds. These spool heads are bump feed type which means they release the string when the bump head is pressed to the ground, giving advantage to the operator to trim the lawn and eliminate the need for turning off the machine where work is not required. They are fit for use with 2- & 4-prong head configurations.

Stens tygon fuel lines maintain air tight seals on fittings in extreme temperatures. They feature clear yellow colour having translucent material for allowing visual inspection of media flow and come in 50 inch length. Further, these oil & gas resistant pipes prevent swelling & hardening and are used in small engine fuel lines, lubrication lines & recreational vehicles.

Little Giant Pumps impeller kits are used to install impellers on rotating shafts or replace damaged impellers for efficiently pumping out liquid. These kits include cast iron impellers with diffusers and mechanical seals.

SPEEDAIRE Air lubricator bowls are designed to add oil into compressed air systems with control to reduce friction. They increase the functionality, efficiency and work-life of the machinery. These bowls are made from polycarbonate and have a bowl guard to prevent them from breaking. These bowls are further equipped with an O-ring for leakproof operation. Choose between standard and compact lubricator bowls, available on Raptor Supplies.

Dayton ignitors are designed for use with direct-fired portable oil & kerosene torpedo heaters. These ignitors produce a spark that ignites the gas connected to heater while the thermostat propel to start the furnace.

Dayton pump shaft seals act as a barrier between rotatory and stationary components to retain lubricating fluids inside the rotary shaft and eliminate ingress of water or debris. These units tightly snug around the shaft by a helically wound garter spring for leak-proof assembly and allows smooth shaft rotation. Choose from awide range of these pump shaft seals, compatible with Dayton pedestal, sewage ejector and centrifugal type pumps.

Dayton spark plug kits are used to distribute electric current from an ignition system to the combustion chamber to ignite compressed fuels / air mixture. Choose from a range of these kits, designed for use with direct-fired portable oil & kerosene torpedo heaters.

Stens ignition switches are suitable for activating the main electrical system of a vehicle and actuating four functions - unlocking the steering wheel, switching on the electrical power and activating the power windows and seats. These mechanical switches are combined with an immobiliser to start the switch functions only when the key is inserted into the switch and a unique transponder signal is detected. When the transponder code in the key matches with the ones programmed in the vehicle, the engine is activated. Choose from a broad range of these starter switches available in magneto and battery type ignition options.