How to install a lock washer?

Place the lock washer between the threaded fastener (like a nut) and the screw / bolt head. Make sure that the lock washer press against the fastener & other adjacent surfaces and forms a tight connection. Press the fastener down to lock the grooves of a tooth lock washer with the grooves of the nut. Use a wrench or ratchet to tighten the nut or threaded fastener. Make sure that the teeth of the tooth lock washer are covered completely by the nut / fastener head, or that the split lock washer is slightly out of alignment to indicate tension on the threaded fastener. Users may loosen the nut / threaded fastener to adjust the washer if it is not operating correctly.

How to remove a lock washer?

After the operation is completed, the washer can be removed by simply removing the nut / threaded fastener that is holding the washer in place using a vise-grip or pipe wrench. Use a flat screwdriver to pry the lock washer off. When removing a split washer, the screwdriver head should be placed inside the split or beneath the washer and pushed. When removing a washer having teeth, the screwdriver head should be placed under a tooth and pushed up, repeating the procedure with more teeth if required. For other lock washer types, the screwdriver head can be placed below the washer and pushed up. The washer may break during removal, depending on the amount of pressure being applied. If the lock washer does not budge, use penetrating oil and repeat the previous step. Some lock washers can be used multiple times easily. Other washers (split lock) can be used only 1 or 2 times. Users should not reuse a split lock washer or other damaged washers. Do not use old washers in high-stress joint applications.

What is the difference between lock washers and flat washers?

Flat washers are suitable for increasing the surface area and distributing the applied force when tightening the fastener. They can be used on the fastener's bolt & nut sides, or used as spacers where using a bolt may not be suitable. Lock washers create tension during tightening to prevent the loosening of nuts. They are generally used on the fastener's nut side for applications involving vibrations.

Which type of lock washers has the highest vibration resistance?

Split Lock, Tooth Lock, Diamond-Coated Lock, Spring Lock and Wedge Lock type lock washers have vibration resistance in ascending or increasing order.

Lock Washers | Raptor Supplies United Kingdom

-

Delta Protect Steel Wedge Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Color	Price (inc. VAT)	Pkg. Qty.
A	1206	#5	0.13"	7/25"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£188.12	1
B	1512	#5	0.13"	7/25"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£24.19	1
C	1207	#6	0.15"	0.3"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£199.30	1
D	1513	#6	0.15"	0.3"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£21.07	20
E	1514	#6	0.15"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£21.07	20
F	1208	#6	0.15"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£201.24	1
G	1515	#8	0.17"	0.3"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£24.19	1
H	1212	#8	0.17"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£202.15	1
I	1516	#8	0.17"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£24.19	1
J	1209	#8	0.17"	0.3"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£155.34	1
K	1518	#10	0.21"	0.43"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£24.19	1
L	1218	#10	0.21"	0.43"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£202.20	1
M	1517	#10	0.21"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£21.05	20
N	1213	#10	0.21"	0.35"	Rockwell C46	0.071"	-0.01" to +0.01"	Silver	£155.34	1
O	1558	1 1/2"	1.59"	2.3"	Rockwell C46	0.26"	-0.02" to +0.02"	Silver	£21.44	1
P	GDP-113	1 1/2"	1.523"	2.196"	Rockwell C40-C55	0.256"	-	Silver	£295.07	25
Q	2806	1 1/2"	1.59"	2.3"	Rockwell C46	0.26"	-0.02" to +0.02"	Silver	£461.45	1
R	GDP-112	1 1/4"	1.275"	1 7/8"	Rockwell C40-C55	0.265"	-	Silver	£188.68	25
S	1555	1 1/4"	1.35"	2.3"	Rockwell C46	0.26"	-0.02" to +0.02"	Silver	£21.44	1
T	2717	1 1/4"	1.35"	1.91"	Rockwell C46	0.26"	-0.02" to +0.02"	Silver	£339.76	1
U	1554	1 1/4"	1.35"	1.91"	Rockwell C46	0.23"	-0.02" to +0.02"	Silver	£16.81	1
V	2742	1 1/4"	1.35"	2.3"	Rockwell C46	0.26"	-0.02" to +0.02"	Silver	£460.87	1
W	1552	1 1/8"	1 6/25"	1.85"	Rockwell C46	0.23"	-0.02" to +0.02"	Silver	£15.10	1
X	1341	1 1/8"	1 6/25"	1.85"	Rockwell C46	0.13"	-0.02" to +0.02"	Silver	£487.51	1
Y	GDP-111	1 1/8"	1.14"	1.715"	Rockwell C40-C55	0.256"	-	Silver	£183.02	1

NORD-LOCK -

Plain Grade 254 SMO Stainless Steel Wedge Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Color	Price (inc. VAT)	Pkg. Qty.
A	1560	#5	0.13"	7/25"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£33.89	1
B	1561	#6	0.15"	0.3"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£37.67	10
C	1562	#6	0.15"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£35.50	1
D	1564	#8	0.17"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£34.30	1
E	1563	#8	0.17"	0.3"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£37.88	1
F	1565	#10	0.21"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£31.48	1
G	1566	#10	0.21"	0.43"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£40.60	10
H	1604	1 1/2"	1.59"	2.3"	Rockwell C52	0.22"	-0.02" to +0.02"	Silver	£90.61	1
I	2834	1 1/4"	1.35"	1.91"	Rockwell C52	0.22"	-0.02" to +0.02"	Silver	£66.25	1
J	1600	1 1/8"	1 6/25"	1.85"	Rockwell C52	0.22"	-0.02" to +0.02"	Silver	£52.44	1
K	2835	1 3/8"	1.47"	2.17"	Rockwell C52	0.22"	-0.02" to +0.02"	Silver	£66.66	1
L	1597	1"	1.1"	1.91"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£50.23	1
M	1596	1"	1.1"	1.54"	Rockwell 52	0.13"	-0.01" to +0.01"	Silver	£51.91	1
N	1580	1/2"	0.53"	0.77"	Rockwell 52	2/25"	-0.01" to +0.01"	Silver	£49.39	1
O	1581	1/2"	0.53"	1"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£53.76	1
P	1569	1/4"	7/25"	0.45"	Rockwell 52	0.09"	-0.01" to +0.01"	Silver	£37.36	1
Q	1570	1/4"	7/25"	0.53"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£37.29	10
R	1588	3/4"	0.79"	1.21"	Rockwell 52	0.13"	-0.01" to +0.01"	Silver	£31.82	3
S	1589	3/4"	0.79"	1.54"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£49.67	1
T	1573	3/8"	0.41"	0.65"	Rockwell 52	2/25"	-0.01" to +0.01"	Silver	£50.38	10
U	1574	3/8"	0.41"	0.83"	Rockwell C52	2/25"	-0.01" to +0.01"	Silver	£41.82	6
V	1584	5/8"	0.67"	1"	Rockwell 52	3/25"	-0.01" to +0.01"	Silver	£46.04	1
W	1585	5/8"	0.67"	1.21"	Rockwell C52	0.1"	-0.01" to +0.01"	Silver	£51.48	1
X	1571	5/16"	0.34"	0.53"	Rockwell 52	2/25"	-0.01" to +0.01"	Silver	£36.85	1
Y	1572	5/16"	0.34"	0.65"	Rockwell C52	2/25"	-0.01" to +0.01"	Silver	£47.88	10

MIDWEST ACORN NUT -

Chrome Plated Steel Split Lock Washers

A

B

C

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Hardness	Thickness Tolerance	Type	Material	Price (inc. VAT)	Pkg. Qty.
A	MPB1000	1/4"	0.26"	0.487"	1/16"	Rockwell C38-C46	-0.01" to +0.01"	Split Lock	Steel	£51.93	50
B	MPB1002	3/8"	0.385"	17/25"	3/32"	Rockwell C38-C46	-0.01" to +0.01"	Split Lock	Steel	£47.89	50
C	MPB1001	5/16"	0.322"	0.583"	0.0781"	Rockwell C38-C46	-0.01" to +0.01"	Split Lock	Steel	£47.89	50

SUPER-STRUT -

Gold Galvanized Steel Split Lock Washers

A

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Type	Material	Finish
A	E148-1/2	1/2"	1/2"	-	-	Split Lock	Steel	Gold Galvanized	RFQ
A	E148-1/4	1/4"	0.26"	0.487"	1/16"	Split Lock	Steel	Gold Galvanized	RFQ
A	E148-3/8	3/8"	3/8"	-	-	Split Lock	Steel	Gold Galvanized	RFQ
A	E148-5/8	5/8"	0.641"	1.073"	0.156"	Split Lock	Steel	Gold Galvanized	RFQ
A	E148-5/16	5/16"	0.325"	0.586"	0.0781"	Split Lock	Steel	Gold Galvanized	RFQ

-

Yellow Zinc Plated Spring Steel Split Lock Washers

A

B

C

D

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Color	Class	Type	Material	Price (inc. VAT)	Pkg. Qty.
A	M37060.030.0001	M3	3.1 mm	6.2 mm	0.8 mm	Gray	-	Split Lock	Spring Steel	£5.06	1
A	M37060.040.0001	M4	4.1 mm	7.6 mm	0.9 mm	Gray	-	Split Lock	Spring Steel	£4.79	1
A	M37060.050.0001	M5	5.1 mm	9.2 mm	1.2 mm	Gray	-	Split Lock	Spring Steel	£8.62	100
B	M37060.060.0001	M6	6.1 mm	11.8 mm	1.6 mm	Silver	Not Applicable	Split Lock	Spring Steel	£10.09	1
A	M37060.070.0001	M7	7.1 mm	12.8 mm	1.6 mm	Gray	-	Split Lock	Spring Steel	£14.80	100
A	M37060.080.0001	M8	8.1 mm	14.8 mm	2 mm	Gray	-	Split Lock	Spring Steel	£9.28	100
C	M37060.100.0001	M10	10.2 mm	18.1 mm	2.2 mm	Silver	Not Applicable	Split Lock	Spring Steel	£13.67	1
A	M37060.120.0001	M12	12.2 mm	21.1 mm	2.5 mm	Gray	-	Split Lock	Spring Steel	£21.59	100
A	M37060.140.0001	M14	14.2 mm	24.1 mm	3 mm	Gray	-	Split Lock	Spring Steel	£38.22	1
D	M37060.160.0001	M16	16.2 mm	27.4 mm	3.5 mm	Silver	Not Applicable	Split Lock	Spring Steel	£25.60	50
A	M37060.180.0001	M18	18.2 mm	29.4 mm	3.5 mm	Gray	-	Split Lock	Spring Steel	£28.91	50
A	M37060.200.0001	M20	20.2 mm	33.6 mm	4 mm	Gray	-	Split Lock	Spring Steel	£15.41	25
A	M37060.220.0001	M22	22.5 mm	35.9 mm	4 mm	Gray	-	Split Lock	Spring Steel	£35.93	1

-

Zinc Plated Steel Wedge Lock Washers

A

B

C

D

E

F

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Color	Thickness Tolerance	Price (inc. VAT)	Pkg. Qty.
A	099-01	#8	0.175"	0.34"	Rockwell C40-C55	2/25"	Silver	-	£101.83	200
B	2397	1/2"	13/25"	0.768"	Rockwell C46	9/64"	Gray	-0.28 mm to +0.28 mm	£324.11	200
C	098-M1	3 mm	3.81 mm	8.6 mm	Rockwell C40-C55	2.03 mm	Silver	-	£89.27	200
B	2403	3/4"	0.779"	1.209"	Rockwell C46	0.2188"	Gray	-0.28 mm to +0.28 mm	£396.70	100
B	2393	3/8"	0.394"	0.654"	Rockwell C46	0.102"	Gray	-0.28 mm to +0.28 mm	£219.07	200
D	100-01	3/16"	0.203"	0.401"	Rockwell C40-C55	2/25"	Silver	-	£102.29	200
E	099-M1	4 mm	4.45 mm	8.6 mm	Rockwell C40-C55	2.03 mm	Silver	-	£92.40	200
F	100-M1	5 mm	5.15 mm	10.2 mm	Rockwell C40-C55	2.03 mm	Silver	-	£103.46	1
B	2618	6 mm	6.3 mm	13.5 mm	Rockwell C46	1.77 mm	Gray	-0.28 mm to +0.28 mm	£193.18	200
B	3303	6 mm	6.3 mm	10.8 mm	Rockwell C46	1.77 mm	Gray	-0.28 mm to +0.28 mm	£180.86	200
B	2373	8 mm	8.4 mm	13.5 mm	Rockwell C46	2.29 mm	Gray	-0.28 mm to +0.28 mm	£193.18	200
B	2374	8 mm	8.4 mm	16.6 mm	Rockwell C46	2.29 mm	Gray	-0.28 mm to +0.28 mm	£217.78	200
B	2375	10 mm	10.5 mm	16.6 mm	Rockwell C46	2.95 mm	Gray	-0.28 mm to +0.28 mm	£219.07	200
B	2621	10 mm	10.5 mm	21 mm	Rockwell C46	2.95 mm	Gray	-0.28 mm to +0.28 mm	£368.19	200
B	2376	12 mm	12.5 mm	19.5 mm	Rockwell C46	3.5 mm	Gray	-0.28 mm to +0.28 mm	£365.59	200
B	2377	12 mm	12.5 mm	25.4 mm	Rockwell C46	3.5 mm	Gray	-0.28 mm to +0.28 mm	£264.45	100
B	2399	14 mm	14.6 mm	23 mm	Rockwell C46	4.03 mm	Gray	-0.28 mm to +0.28 mm	£241.13	100
B	2379	16 mm	16.6 mm	30.7 mm	Rockwell C46	4.74 mm	Gray	-0.28 mm to +0.28 mm	£396.70	100
B	2378	16 mm	16.6 mm	25.4 mm	Rockwell C46	4.74 mm	Gray	-0.28 mm to +0.28 mm	£264.45	100
B	2380	20 mm	20.7 mm	30.7 mm	Rockwell C46	6.01 mm	Gray	-0.32 mm to +0.32 mm	£396.70	100

APPROVED VENDOR -

Furnace Black Steel Internal Tooth Lock Washers

A

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Class	Hardness	Type	Material	Price (inc. VAT)	Pkg. Qty.
A	M37320.030.0001	M3	3.2 mm	6 mm	0.4 mm to 0.8 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£5.81	1
A	M37320.040.0001	M4	4.3 mm	8 mm	0.5 mm to 1 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£5.07	1
A	M37320.050.0001	M5	5.3 mm	10 mm	0.6 mm to 1.2 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£6.88	1
A	M37320.060.0001	M6	6.4 mm	11 mm	0.7 mm to 1.4 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£6.53	1
A	M37320.080.0001	M8	8.4 mm	15 mm	0.8 mm to 1.6 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£10.02	100
A	M37320.100.0001	M10	10.5 mm	18 mm	0.9 mm to 1.8 mm	Not Applicable	Rockwell C35-C42	Internal Tooth Lock	Steel	£18.36	1

APPROVED VENDOR -

Furnace Black Steel Split Lock Washers

A

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Thickness Tolerance	Class	Hardness	Price (inc. VAT)
A	M37000.030.0001	M3	3.1 mm	6.2 mm	0.8 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£4.04
A	M37200.030.0001	M3	3.1 mm	5.6 mm	1 mm	-	Not Applicable	Rockwell C44-C51	£6.45
A	M37000.035.0001	M3.5	3.6 mm	6.7 mm	0.8 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£4.11
A	M37200.040.0001	M4	4.1 mm	7 mm	1.2 mm	-	Not Applicable	Rockwell C44-C51	£4.31
A	M37000.040.0001	M4	4.1 mm	7.6 mm	0.9 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£2.64
A	M37000.050.0001	M5	5.1 mm	9.2 mm	1.2 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£1.77
A	M37200.050.0001	M5	5.1 mm	8.8 mm	1.6 mm	-	Not Applicable	Rockwell C44-C51	£7.81
A	M37000.060.0001	M6	6.1 mm	11.8 mm	1.6 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£3.06
A	M37200.060.0001	M6	6.1 mm	9.9 mm	1.6 mm	-	Not Applicable	Rockwell C44-C51	£3.09
A	M37000.080.0001	M8	8.1 mm	14.8 mm	2 mm	-0.1 mm to +0.1 mm	Not Applicable	Rockwell C44-C51	£4.39
A	M37200.080.0001	M8	8.1 mm	12.7 mm	2 mm	-	Not Applicable	Rockwell C44-C51	£5.29
A	M37000.100.0001	M10	10.2 mm	18.1 mm	2.2 mm	-0.15 mm to +0.15 mm	Not Applicable	Rockwell C44-C51	£5.05
A	M37200.100.0001	M10	10.2 mm	16 mm	2.5 mm	-0.127 mm to +0.127 mm	Not Applicable	Rockwell C44-C51	£4.71

APPROVED VENDOR -

Zinc Plated Grade 1050-1065 Spring Steel Split Lock Washers

A

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Thickness Tolerance	Class	Hardness	Price (inc. VAT)	Pkg. Qty.
A	LWIS-100-100P	#10	1/5"	0.334"	0.047"	0.047" to 0.062"	Not Applicable	Rockwell C38-C46	£1.64	100
A	LWIS0250-100P	1/4"	0.26"	0.487"	1/16"	0.062" to 0.109"	Not Applicable	Rockwell C38-C46	£1.80	100
A	LWIS0370-100P	3/8"	0.385"	17/25"	3/32"	0.094" to 0.141"	Not Applicable	Rockwell C38-C46	£4.35	100

NORD-LOCK -

Plain Grade 316 Stainless Steel Wedge Lock Washers

A

B

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Color	Price (inc. VAT)	Pkg. Qty.
A	1069	#5	0.13"	7/25"	Rockwell C46	0.09"	-0.01" to +0.01"	Silver	£614.02	1
A	1070	#6	0.15"	0.3"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£623.96	1
B	1071	#6	0.15"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£656.95	1
B	1074	#8	0.17"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£614.57	1
A	1072	#8	0.17"	0.3"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£611.17	1
A	1075	#10	0.21"	0.35"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£602.10	1
B	1079	#10	0.21"	0.43"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£630.88	1
A	2807	1 1/2"	1.59"	2.3"	Rockwell C52	0.27"	-0.02" to +0.02"	Silver	£2,083.07	1
A	2733	1 1/4"	1.35"	1.91"	Rockwell C52	0.27"	-0.02" to +0.02"	Silver	£1,311.42	1
A	2722	1 1/8"	1 6/25"	1.85"	Rockwell C52	0.27"	-0.02" to +0.02"	Silver	£2,361.01	1
B	2745	1 1/8"	1 6/25"	2.3"	Rockwell C52	0.27"	-0.02" to +0.02"	Silver	£2,063.89	1
A	2902	1 3/4"	1.82"	2 19/25"	Rockwell C52	0.27"	-0.03" to +0.03"	Silver	£244.35	1
A	2732	1 3/8"	1.47"	2.17"	Rockwell C52	0.27"	-0.02" to +0.02"	Silver	£1,737.90	1
B	2746	1"	1.1"	1.91"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£2,528.08	1
A	2734	1"	1.1"	1.54"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£2,193.86	1
A	2149	1/2"	0.53"	0.77"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£1,031.10	1
B	1110	1/2"	0.53"	1"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£1,047.91	100
A	1085	1/4"	7/25"	0.45"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£634.25	1
B	1086	1/4"	7/25"	0.53"	Rockwell C52	0.09"	-0.01" to +0.01"	Silver	£700.97	1
A	2907	2 1/2"	2 16/25"	3.74"	Rockwell C52	0.35"	-0.03" to +0.03"	Silver	£758.45	1
A	2905	2 1/4"	2.33"	3.35"	Rockwell C52	0.35"	-0.03" to +0.03"	Silver	£703.03	1
A	2904	2"	2.11"	3.15"	Rockwell C52	0.35"	-0.03" to +0.03"	Silver	£691.66	1
A	2910	3"	3.11"	4.33"	Rockwell C52	0.35"	-0.03" to +0.03"	Silver	£825.41	1
A	1121	3/4"	0.79"	1.21"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£1,477.81	1
B	2740	3/4"	0.79"	1.54"	Rockwell C52	0.13"	-0.01" to +0.01"	Silver	£2,074.46	1

APPROVED VENDOR -

Zinc Plated Grade 2 Steel External Tooth Lock Washers

A

B

C

D

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Class	Color	Price (inc. VAT)	Pkg. Qty.
A	U37420.021.0001	#12	0.231"	0.475"	Rockwell C40-C50	0.027"	0.02" to 0.027"	Not Applicable	Silver	£6.97	100
B	U37420.100.0001	1"	1.025"	1.59"	Rockwell C38-C46	0.059"	0.059" to 0.067"	Not Applicable	Silver	£9.14	1
C	U37420.025.0001	1/4"	0.267"	0.51"	Rockwell C40-C50	0.028"	0.023" to 0.028"	Not Applicable	Silver	£7.05	100
D	U37420.087.0001	7/8"	0.897"	1.38"	Rockwell C38-C46	0.052"	0.052" to 0.06"	Not Applicable	Silver	£6.36	1

FABORY -

Plain Stainless Steel Internal Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Color	Price (inc. VAT)	Pkg. Qty.
A	B53462.025.0001	#2	0.256"	0.46"	-	0.023"	-	-	£1,310.90	25000
B	B53462.008.0001	#2	0.089"	0.172"	-	0.01"	-	-	£2,903.15	50000
C	B51462.011.0001	#2	0.115"	0.245"	Rockwell C45-C50	0.012"	0.012" to 0.018"	-	£1,588.42	50000
D	B53462.050.0001	#3	0.512"	0.867"	Rockwell C40	0.037"	-0.004" to +0.004"	-	£1,628.79	5000
E	B53462.009.0001	#3	0.102"	0.215"	-	0.01"	-	-	£3,289.74	50000
F	B53462.031.0001	#3	8/25"	0.594"	-	0.028"	-	-	£1,559.55	17200
G	B53462.037.0001	#4	0.384"	0.67"	-	0.032"	-	-	£1,616.52	13150
H	B51462.075.0001	#4	0.769"	1.22"	Rockwell C45-C50	0.047"	0.047" to 0.055"	-	£2,645.10	2500
I	B51462.013.0001	#4	0.141"	0.275"	-	0.016"	-	-	£2,621.81	50000
J	B53462.062.0001	#4	16/25"	1.045"	Rockwell C40	0.042"	-0.004" to +0.004"	-	£3,045.01	5000
K	B53462.011.0001	#4	0.115"	0.245"	Rockwell C40-C50	0.012"	0.012" to 0.018"	-	£2,591.86	50000
L	B53462.075.0001	#5	0.769"	1.22"	Rockwell C40	0.047"	-0.004" to +0.004"	-	£2,186.09	2500
M	B51462.016.0001	#6	0.168"	0.325"	Rockwell C45-C50	0.018"	0.018" to 0.023"	-	£2,972.22	50000
N	B51462.037.0001	#6	0.384"	0.67"	Rockwell C45-C50	0.032"	0.032" to 0.04"	-	£2,014.77	13150
O	B53462.013.0001	#6	0.141"	0.275"	Rockwell C40-C50	0.016"	0.016" to 0.022"	-	£1,966.36	50000
P	B55462.016.0001	#8	0.168"	0.325"	-	0.018"	-	-	£8,341.04	50000
Q	B53462.016.0001	#8	0.168"	0.325"	Rockwell C40-C50	0.018"	0.018" to 0.023"	-	£2,831.49	50000
R	B51462.019.0001	#8	0.195"	0.365"	Rockwell C45-C50	0.018"	0.018" to 0.024"	-	£2,492.77	50000
S	B53462.019.0001	#10	0.195"	0.365"	Rockwell C40-C50	0.018"	0.018" to 0.024"	-	£3,475.96	50000
M	B51462.025.0001	#10	0.256"	0.46"	Rockwell C20-C45	0.023"	0.023" to 0.028"	-	£1,447.46	25000
T	B51462.050.0001	#10	0.512"	0.867"	Rockwell C45-C50	0.037"	0.037" to 0.045"	-	£2,338.30	5000
U	B53462.021.0001	#12	0.221"	0.394"	Rockwell C40-C50	0.02"	0.02" to 0.027"	-	£1,194.24	25000
M	B55462.025.0001	1/4"	0.256"	0.46"	Rockwell B88	0.023"	-0.0025" to +0.0025"	-	£14,139.75	25000
V	B55462.037.0001	3/8"	0.384"	0.67"	-	0.032"	-	-	£1,612.99	13150
M	B55462.031.0001	5/16"	8/25"	0.594"	-	0.028"	-	-	£12,471.80	17200

APPROVED VENDOR -

Plain Grade A2 Stainless Steel Internal Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Class	Type	Material	Grade	Price (inc. VAT)	Pkg. Qty.
A	M51458.020.0001	M2	2.2 mm	4.5 mm	0.3 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£3.51	1
B	SIW7X0250-100P1	M2.5	2.7 mm	5.5 mm	0.4 mm to 0.8 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£6.60	100
B	SIW7X0260-100P1	M2.6	2.8 mm	5.5 mm	0.4 mm to 0.8 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£6.94	100
C	M51458.030.0001	M3	3.2 mm	6 mm	0.4 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£2.82	50
B	SIW7X0350-100P1	M3.5	3.7 mm	7 mm	0.5 mm to 1 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£7.14	100
D	M51458.040.0001	M4	4.3 mm	8 mm	0.5 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£2.98	1
E	M51458.050.0001	M5	5.3 mm	10 mm	0.6 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£2.82	1
F	M51458.060.0001	M6	6.4 mm	11 mm	0.7 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£4.43	1
G	M51458.080.0001	M8	8.4 mm	15 mm	0.8 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£5.93	1
H	M51458.100.0001	M10	10.5 mm	18 mm	0.9 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£7.47	1
I	M51458.120.0001	M12	13 mm	20.5 mm	1 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£3.82	1
J	M51458.140.0001	M14	15 mm	24 mm	1 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£5.36	1
K	M51458.160.0001	M16	17 mm	26 mm	1.2 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£4.39	1
L	M51458.200.0001	M20	21 mm	33 mm	1.4 mm	Not Applicable	Internal Tooth Lock	Stainless Steel	Grade A2	£4.57	1

-

Zinc Plated Steel Internal and External Tooth Lock Washers

A

B

C

D

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Class	Hardness	Type	Material	Price (inc. VAT)	Pkg. Qty.
A	B37590.050.0001	#4	0.512"	1.38"	0.052"	-	-	Internal And External Tooth Lock	Steel	£3,717.05	6750
B	B37590.037.0001	#12	0.384"	1 1/8"	0.042"	-	-	Internal And External Tooth Lock	Steel	£3,343.56	13150
C	U37590.050.0001	1/2"	0.512"	1.38"	0.052"	Not Applicable	Rockwell C40-C50	Internal And External Tooth Lock	Steel	£11.87	25
D	U37590.037.0001	3/8"	0.384"	1 1/8"	0.042"	Not Applicable	Rockwell C40-C50	Internal And External Tooth Lock	Steel	£10.94	50

-

Zinc Plated Steel External Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Class	Color	Price (inc. VAT)	Pkg. Qty.
A	B37420.013.0001	#2	0.141"	0.305"	-	0.016"	-	-	-	£959.36	90000
B	B37420.016.0001	#3	0.168"	0.365"	-	0.018"	-	-	-	£546.21	50000
C	B37420.019.0001	#4	0.195"	0.395"	-	0.018"	-	-	-	£860.42	50000
D	B37420.031.0001	#4	8/25"	0.588"	-	0.028"	-	-	-	£672.92	22700
E	U37420.011.0001	#4	0.123"	0.26"	Rockwell C40-C50	0.018"	-	Not Applicable	-	£1.74	1
F	B37420.062.0001	#4	0.641"	1.045"	-	0.042"	-	-	-	£879.84	5000
G	B37420.037.0001	#5	0.384"	0.67"	-	0.032"	-	-	-	£855.73	14450
H	U37420.013.0001	#6	0.15"	8/25"	Rockwell C40-C50	0.022"	-	Not Applicable	-	£1.44	1
I	B37420.075.0001	#6	0.768"	1.22"	-	0.047"	-	-	-	£868.94	3330
J	B37420.043.0001	#6	0.448"	0.74"	-	0.032"	-	-	-	£1,296.41	12500
K	6DZC4	#6	0.15"	8/25"	Rockwell C40-C50	0.022"	-0.006"	Not Applicable	-	£6.57	100
L	U37420.016.0001	#8	0.176"	0.381"	Rockwell C40-C50	0.023"	-	Not Applicable	-	£1.56	100
K	6DZC5	#8	0.176"	0.381"	Rockwell C40-C50	0.023"	-0.005"	Not Applicable	-	£4.02	100
M	B37420.050.0001	#8	0.513"	22/25"	-	0.037"	-	-	-	£679.46	6750
N	U37420.019.0001	#10	0.204"	0.41"	Rockwell C40-C50	0.024"	-	Not Applicable	-	£1.52	100
O	B37420.056.0001	#10	0.576"	24/25"	-	0.037"	-	-	-	£1,253.07	6325
P	B37420.011.0001	#12	0.115"	0.245"	-	0.012"	-	-	-	£987.09	90000
Q	U37420.050.0001	1/2"	0.513"	22/25"	Rockwell C40-C50	0.037"	-	Not Applicable	-	£3.67	1
R	U37420.075.0001	3/4"	0.768"	1.22"	Rockwell C40-C50	0.047"	-	Not Applicable	-	£4.14	10
S	U37420.037.0001	3/8"	0.384"	0.67"	Rockwell C40-C50	0.032"	-	Not Applicable	-	£4.34	1
T	U37420.062.0001	5/8"	0.641"	1.045"	Rockwell C40-C50	0.042"	-	Not Applicable	-	£2.80	10
U	U37420.031.0001	5/16"	0.332"	0.61"	Rockwell C40-C50	0.034"	-	Not Applicable	-	£4.60	1
V	U37420.043.0001	7/16"	0.448"	0.74"	Rockwell C40-C50	0.032"	-	Not Applicable	-	£2.24	25
W	U37420.056.0001	9/16"	0.576"	24/25"	Rockwell C40-C50	0.037"	-	Not Applicable	-	£4.26	25
X	M37420.030.0001	M3	3.2 mm	6 mm	Rockwell C38-C46	0.4 mm	-	Not Applicable	-	£6.99	1

APPROVED VENDOR -

Plain Grade 410 Stainless Steel External Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Class	Color	Price (inc. VAT)	Pkg. Qty.
A	1NY46	#4	0.123"	0.26"	Rockwell C40	0.018"	0.012" to 0.018"	Not Applicable	Silver	£5.60	100
B	U53460.011.0001	#4	0.115"	0.245"	Rockwell C40-C50	0.012"	0.012" to 0.018"	Not Applicable	-	£2.42	1
C	U53460.013.0001	#6	0.141"	0.305"	Rockwell C40	0.016"	0.016" to 0.022"	Not Applicable	-	£2.04	1
D	U53460.016.0001	#8	0.168"	0.365"	Rockwell C40	0.018"	-	Not Applicable	-	£3.18	1
E	U53460.019.0001	#10	0.195"	0.395"	Rockwell C40	0.018 ft.	-	Not Applicable	-	£4.58	1
F	U53460.050.0001	1/2"	0.513"	22/25"	Rockwell C40	0.037"	-	Not Applicable	-	£3.67	1
G	U53460.025.0001	1/4"	0.256"	0.494"	Rockwell C40	0.023"	0.023" to 0.028"	Not Applicable	-	£10.32	1
H	U53460.075.0001	3/4"	0.768"	1.22"	Rockwell C40	0.047"	-	Not Applicable	-	£6.15	1
I	U53460.037.0001	3/8"	0.398"	0.694"	Rockwell C40	1/25"	0.032" to 0.04"	Not Applicable	Silver	£15.57	1
J	U53460.062.0001	5/8"	0.641"	1.045"	Rockwell C40	0.042"	-	Not Applicable	-	£15.64	1
K	U53460.031.0001	5/16"	8/25"	0.588"	Rockwell C40	0.028"	-	Not Applicable	-	£8.85	1
L	U53460.043.0001	7/16"	0.448"	0.74"	Rockwell C40	0.032"	0.032" to 0.04"	Not Applicable	-	£11.40	1

-

Plain Phosphor Bronze Internal Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Class	Price (inc. VAT)	Pkg. Qty.
A	B50462.037.0001	#2	0.384"	0.67"	-	0.032"	-	-	£7,147.82	13150
B	B50462.008.0001	#2	0.089"	0.172"	-	0.01"	-	-	£5,670.45	90000
C	U50462.008.0001	#2	0.095"	1/5"	Rockwell B90	0.015"	0.01" to 0.016"	Not Applicable	£4.47	1
D	B50462.011.0001	#3	0.115"	0.245"	-	0.012"	-	-	£7,765.06	90000
E	B50462.050.0001	#3	0.512"	0.867"	-	0.037"	-	-	£7,747.12	6750
F	B50462.013.0001	#4	0.141"	0.275"	-	0.016"	-	-	£8,557.32	90000
G	U50462.011.0001	#4	0.123"	0.27"	Rockwell B90	0.018"	0.012" to 0.018"	Not Applicable	£9.15	1
H	U50462.013.0001	#6	0.15"	0.295"	Rockwell B90	0.02"	0.016" to 0.022"	Not Applicable	£8.46	1
I	B50462.016.0001	#6	0.168"	0.325"	-	0.018"	-	-	£5,058.83	50000
J	B50462.019.0001	#8	0.195"	0.365"	-	0.018"	-	-	£10,457.32	50000
K	U50462.016.0001	#8	0.176"	0.34"	Rockwell B90	0.023"	0.018" to 0.023"	Not Applicable	£8.68	1
L	U50462.019.0001	#10	0.204"	0.381"	Rockwell B90	0.024"	0.018" to 0.024"	Not Applicable	£20.84	1
M	B50462.031.0001	#12	8/25"	0.594"	-	0.028"	-	-	£10,755.14	17200
N	U50462.050.0001	1/2"	0.53"	0.9"	Rockwell B90	0.045"	0.037" to 0.045"	Not Applicable	£20.74	1
O	U50462.025.0001	1/4"	0.256"	0.46"	Rockwell B90	0.023"	0.023" to 0.028"	Not Applicable	£23.32	1
P	B50462.025.0001	1/4"	0.256"	0.46"	-	0.023"	-	-	£7,690.11	37000
Q	U50462.037.0001	3/8"	0.398"	0.692"	Rockwell B90	1/25"	0.032" to 0.04"	Not Applicable	£30.72	1
R	U50462.031.0001	5/16"	8/25"	0.594"	Rockwell C50	0.028"	-	Not Applicable	£75.15	1

-

Plain Silicon Bronze Split Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Thickness Tolerance	Class	Hardness	Price (inc. VAT)	Pkg. Qty.
A	B43150.025.0001	#4	0.252"	0.487"	1/16"	-	-	-	£2,672.34	9300
B	1NU87	#4	3/25"	0.209"	0.025"	+0.025"	Not Applicable	Rockwell B90	£5.14	1
C	B43150.037.0001	#6	0.377"	17/25"	3/32"	-	-	-	£2,243.80	3400
D	1NU88	#6	0.148"	1/4"	0.031"	+0.031"	Not Applicable	Rockwell B90	£7.34	100
E	U43150.013.0001	#6	0.141"	1/4"	0.031"	Not Rated	-	Rockwell B90	£8.45	1
E	U43150.016.0001	#8	0.167"	0.293"	1/25"	-	-	Rockwell B90	£16.82	100
F	B43150.050.0001	#8	0.502"	0.869"	1/8"	-	-	-	£4,070.57	1650
G	B43150.019.0001	#8	0.193"	0.334"	0.047"	-	-	-	£5,880.20	30300
H	B43150.062.0001	#10	0.628"	1.073"	0.156"	-	-	-	£4,461.03	900
I	B43150.021.0001	#10	0.22"	0.377"	0.056"	-	-	-	£7,277.80	16600
J	U43150.019.0001	#10	0.193"	0.334"	0.047"	-	Not Applicable	Rockwell B90	£45.48	100
E	U43150.021.0001	#12	0.22"	0.377"	0.056"	-	Not Applicable	Rockwell B90	£41.49	100
E	U43150.050.0001	1/2"	0.502"	0.869"	1/8"	-	Not Applicable	Rockwell B90	£50.95	1
K	1NU95	1/2"	0.641"	1.073"	1/8"	+0.156"	Not Applicable	Rockwell B90	£59.91	25
E	U43150.025.0001	1/4"	0.252"	0.487"	1/16"	-	Not Applicable	Rockwell B90	£81.41	1
L	U43150.037.0001	3/8"	0.377"	17/25"	3/32"	-	Not Applicable	Rockwell B90	£84.24	1
M	U43150.075.0001	5/8"	0.766"	1.265"	0.156"	+0.188"	Not Applicable	Rockwell B90	£43.75	1
E	U43150.062.0001	5/8"	0.628"	1.073"	0.156"	-	Not Applicable	Rockwell B90	£59.05	1
E	U43150.031.0001	5/16"	0.314"	0.583"	0.0781"	-	-	Rockwell B90	£62.61	1

-

Zinc Plated Steel Internal Tooth Lock Washers

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Hardness	Thickness	Thickness Tolerance	Class	Color	Price (inc. VAT)	Pkg. Qty.
A	B37480.008.0001	#2	0.089"	0.172"	-	0.01"	-	-	-	£1,676.36	90000
B	B37321.025.0001	#2	0.256"	1/2"	-	0.035"	-	-	-	£13,125.50	37000
C	U37480.008.0001	#2	0.095"	1/5"	Rockwell C40-C50	0.016"	-	Not Applicable	-	£1.43	100
D	B37321.031.0001	#3	8/25"	0.59"	-	1/25"	-	-	-	£5,596.46	17200
E	B37321.037.0001	#4	0.384"	0.7"	-	0.042"	-	-	-	£10,004.03	13150
F	B37480.050.0001	#4	0.512"	0.867"	-	0.037"	-	-	-	£1,007.48	6750
G	B37480.011.0001	#4	0.115"	0.245"	-	0.012"	-	-	-	£820.22	90000
H	U37480.011.0001	#4	0.123"	0.27"	Rockwell C40-C50	0.018"	-	Not Applicable	-	£1.28	1
I	6DZC6	#4	0.123"	0.27"	Rockwell C40-C50	0.018"	-0.006"	Not Applicable	-	£4.06	1
J	B37480.087.0001	#4	0.894"	1.364"	Rockwell C38-C46	0.052"	0.052" to 0.06"	-	-	£1,416.07	2500
K	B37480.056.0001	#6	0.576"	0.957"	Rockwell C38-C46	0.037"	0.037" to 0.045"	-	-	£1,026.73	5550
I	6DZC7	#6	0.15"	0.295"	Rockwell C40-C50	0.022"	-0.006"	Not Applicable	-	£4.00	100
L	B37480.013.0001	#6	0.141"	0.275"	-	0.016"	-	-	-	£1,011.93	90000
M	B37480.025.0001	#6	0.256"	0.46"	Rockwell C40-C50	0.023"	0.023" to 0.028"	-	-	£869.03	37000
N	U37480.013.0001	#6	0.15"	0.295"	Rockwell C40-C50	0.022"	-	Not Applicable	-	£1.44	1
O	B37321.050.0001	#6	0.512"	22/25"	-	0.055"	-	-	-	£9,420.24	6750
I	6DZC8	#8	0.176"	0.34"	Rockwell C40-C50	0.023"	-0.006"	Not Applicable	-	£6.23	100
P	U37480.016.0001	#8	0.176"	0.34"	Rockwell C40-C50	0.023"	-	Not Applicable	-	£1.52	1
Q	B37480.031.0001	#8	8/25"	0.594"	-	0.028"	-	-	-	£582.50	17200
R	B37480.016.0001	#8	0.168"	0.325"	-	0.018"	-	-	-	£518.90	50000
S	B37321.062.0001	#8	16/25"	1.1"	-	0.059"	-	-	-	£9,577.97	5000
T	B37480.062.0001	#8	16/25"	1.045"	-	0.042"	-	-	-	£879.14	5000
U	B37480.037.0001	#10	0.384"	0.67"	-	0.032"	-	-	-	£886.94	13150
V	B37480.019.0001	#10	0.195"	0.365"	-	0.018"	-	-	-	£606.29	50000
W	B37480.075.0001	#10	0.769"	1.22"	-	0.047"	-	-	-	£1,081.76	2970

FABORY -

Yellow Zinc Plated Alloy Steel Split Lock Washers

A

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Hardness	Color	Type	Material	Price (inc. VAT)	Pkg. Qty.
A	U37061.150.0001	1 1/2"	1.504"	2.419"	3/8"	-	Gray	Split Lock	Alloy Steel	£17.44	1
A	U37061.125.0001	1 1/4"	1.254"	2.036"	5/16"	-	Gray	Split Lock	Alloy Steel	£10.36	1
A	U37061.112.0001	1 1/8"	1.129"	1.847"	0.2813"	Rockwell C38	Gray	Split Lock	Alloy Steel	£19.65	1
A	U37061.137.0001	1 3/8"	1.379"	2.219"	0.3438"	Rockwell C38	Gray	Split Lock	Alloy Steel	£69.03	1
A	U37061.100.0001	1"	1.003"	1.656"	1/4"	-	Gray	Split Lock	Alloy Steel	£6.16	1
A	U37061.050.0001	1/2"	0.502"	0.869"	1/8"	-	Gray	Split Lock	Alloy Steel	£4.49	1
A	U37061.025.0001	1/4"	0.252"	0.487"	1/16"	-	Gray	Split Lock	Alloy Steel	£4.05	1
A	U37061.075.0001	3/4"	0.753"	1.265"	3/16"	-	Gray	Split Lock	Alloy Steel	£5.58	1
A	B37061.037.0001	3/8"	0.377"	17/25"	0.0938"	-	Gray	Split Lock	Alloy Steel	£217.33	3
A	U37061.037.0001	3/8"	0.377"	17/25"	0.0938"	-	Gray	Split Lock	Alloy Steel	£4.99	1
A	U37061.062.0001	5/8"	0.628"	1.073"	0.156"	-	Gray	Split Lock	Alloy Steel	£4.81	1
A	U37061.031.0001	5/16"	0.314"	0.583"	0.0781"	-	Gray	Split Lock	Alloy Steel	£5.47	1
A	U37061.087.0001	7/8"	0.878"	1.459"	0.2188"	-	Gray	Split Lock	Alloy Steel	£4.66	1
A	U37061.043.0001	7/16"	11/25"	0.77"	0.1094"	-	Gray	Split Lock	Alloy Steel	£4.07	1
A	U37061.056.0001	9/16"	0.564"	0.965"	9/64"	-	Gray	Split Lock	Alloy Steel	£5.90	1

FABORY -

Zinc Plated Spring Steel Split Lock Washers

A

B

Style	Model	Fits Bolt Sizes	Inside Dia.	Outside Dia.	Thickness	Color	Type	Material	Finish	Price (inc. VAT)	Pkg. Qty.
A	M37020.023.0001	M2.3	2.4 mm	4.9 mm	0.6 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£2.80	1
B	M37220.030.0001	M3	3.1 mm	5.6 mm	1 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£2.43	100
A	L37060.100.0001	M10	10.2 mm	18.1 mm	2.2 mm	Silver	Split Lock	Spring Steel	Zinc Plated	£593.61	4000
A	M37020.110.0001	M11	11.2 mm	18.2 mm	2.2 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£15.24	50
B	M37220.140.0001	M14	14.2 mm	21.1 mm	3 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£3.58	25
A	L37060.160.0001	M16	16.2 mm	27.4 mm	3.5 mm	Silver	Split Lock	Spring Steel	Zinc Plated	£641.49	1150
B	M37220.220.0001	M22	22.5 mm	32.9 mm	4.5 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£12.80	1
B	M37220.240.0001	M24	24.5 mm	35.9 mm	5 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£8.30	1
A	M37020.270.0001	M27	27.5 mm	43 mm	5 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£11.59	10
A	M37020.330.0001	M33	33.5 mm	55.2 mm	6 mm	Gray	Split Lock	Spring Steel	Zinc Plated	£3.15	2

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Lock Washers

Delta Protect Steel Wedge Lock Washers

Plain Grade 254 SMO Stainless Steel Wedge Lock Washers

Chrome Plated Steel Split Lock Washers

Gold Galvanized Steel Split Lock Washers

Yellow Zinc Plated Spring Steel Split Lock Washers

Zinc Plated Steel Wedge Lock Washers

Furnace Black Steel Internal Tooth Lock Washers

Furnace Black Steel Split Lock Washers

Zinc Plated Grade 1050-1065 Spring Steel Split Lock Washers

Plain Grade 316 Stainless Steel Wedge Lock Washers

Zinc Plated Grade 2 Steel External Tooth Lock Washers

Plain Stainless Steel Internal Tooth Lock Washers

Plain Grade A2 Stainless Steel Internal Tooth Lock Washers

Zinc Plated Steel Internal and External Tooth Lock Washers

Zinc Plated Steel External Tooth Lock Washers

Plain Grade 410 Stainless Steel External Tooth Lock Washers

Plain Phosphor Bronze Internal Tooth Lock Washers

Plain Silicon Bronze Split Lock Washers

Zinc Plated Steel Internal Tooth Lock Washers

Yellow Zinc Plated Alloy Steel Split Lock Washers

Zinc Plated Spring Steel Split Lock Washers

Lock Washers

Frequently Asked Questions

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Lock Washers

Lock Washers

Frequently Asked Questions

How to install a lock washer?

How to remove a lock washer?

What is the difference between lock washers and flat washers?

Which type of lock washers has the highest vibration resistance?

We are here to help!

Looking for a part not listed here?

Popular Search Queries

Explore More