Greenlee Hydraulic Crimping Tool System | Raptor Supplies United Kingdom

GREENLEE Hydraulic Crimping Tool System

Ideal for crimping spiral, braided, thermoplastic & teflon hoses, lugs, C & H taps, and overhead tension sleeves. Powered in both retract and advance directions to prevent hang-ups. Can withstand pressures up to 10000 psi and are offered in jaw lengths of 1.65 & 3.65 inches

Filter

Greenlee crimping tools are suitable for crimping spiral, braided, thermoplastic & Teflon hoses, lugs, C & H taps and overhead tension sleeves. These crimping tools can be powered in both retract and advance directions to prevent hang-ups and withstand pressures up to 10000 psi.
GREENLEE -

Hydraulic Crimp Tool 6.2 Ton

StyleModelCapacityHeightLengthWidthPrice (inc. VAT)
ARK06AT500 kcmil2.625"10"5"£3,219.13
BRK06FT750 kcmil2.5"10.625"5.25"£4,872.89

Frequently Asked Questions

What is the difference between crimping and swaging?

Crimping and swaging produce airtight and watertight seals around components like hydraulic hoses. Crimping requires using a powerful crimping machine to apply pressure in all directions to a hose coupling for creating a tight seal, whereas swaging involves rapid and constant closures to shape an angular coupling down to a smaller, sealed circular shape.

What is a hydraulic crimper used for?

Hydraulic crimpers are used for industrial applications like electrical wiring, plumbing and automotive assembly. They are also used to make a permanent coupling attaching a hydraulic hose to a hose fitting. These crimpers are suitable for wide-scale production lines where manual labour costs are high.

What are the two types of crimping?

Crimp types fall into two groups: compression crimps and stab crimps. The cup and tab type crimper is an example of a stab crimp and features a U shaped crimp point on one jaw and a short, extended projection on the other.

We are here to help!

Looking for a part not listed here?