Electromagnetic Lock Power Supplies

Altronix open frame transformers are used to power heavy electronic equipment such as security, access control & surveillance devices. These step down transformers reduce voltage and increase amperage output proportionally. They are fitted inside steel angle frames for easy mounting on terminal blocks, rail terminals and stud connections. Choose from a wide range of these open frame transformers, also available with enclosure boxes for protection.

Altronix Pace Series long range ethernet receivers are designed to receive ethernet ports and transmit them further at a maximum transfer speed of 100 Mbps per port. These units are easy to install and provide effective transfer to IP devices over a distance of 500 meters. The ports are arranged in a gang of 4 outputs and 4 inputs. They are powered by CAT5e or higher cables in a PoE(+) compliant format and are equipped with LEDs for IP link status. Choose from a wide range of these ethernet receivers, available in 4, 8 & 16 port options on Raptor Supplies.

Altronix battery shelves allow the addition of two 12VDC / 12 AH batteries to enclosures, bringing the the total up to four 12VDC / 12 AH batteries. These units feature steel construction for handling high temperatures and offering excellent corrosion resistance. They are ideal for Altronix BC400G and BC400R power supply / battery enclosures.

Altronix Vertiline CCTV rack mount power supplies provide 16 fuse, protected power outputs in space saving, rack mount chassis that can also be wall or shelf mounted. They feature individually selectable, 24VAC or 28VAC power outputs with surge suppression to resist increasing temperatures. These UL-listed devices protect against short circuits & thermal overloads and provide filtered and regulated outputs for a smooth DC power supply. They offer illuminated, master power disconnect circuit breakers with manual reset switches for default settings and removable terminal blocks with locking screw flanges to secure the wires together. Choose from a wide range of these power supplies with operating temperatures of 0 to 49 degrees C and are available in 50Hz & 60Hz input frequencies.

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.

Altronix passive UTP transceiver hubs feature integral camera power to transmit UTP video, RS422 / RS485 data and power over a single CAT-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to protect from voltage spikes. The video transmission range is up to 750 ft per channel. They are compatible with AC and / or DC fixed or PTZ cameras when utilising Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi video baluns / combiners.

Altronix AL300ULX Series power supplies are used for converting a 115VAC, 60 Hz input into 1 / 4 / 8 / 16 fused or PTC protected outputs. These power supplies feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. They are integrated with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. They switch automatically over to stand-by battery in case of AC failure and are capable of being operated at temperatures ranging from 32 to 120 degrees F. They are available in enclosure heights of 13.5 & 15.5 inches.

Altronix AL600ULX Series power supplies are designed for converting a 115VAC, 60Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix backplanes are ideal for trove enclosures that accommodate & easily integrate power supplies / chargers with mercury power boards, access controllers & sub-assemblies. They feature galvanised steel construction for ease of inspection, tough coating & corrosion resistance and include mounting hardware for easy installation. Further, these backplanes simplify wire management & board layouts, as well as minimise labour costs & installation time.

Altronix NAC power extenders / supplies are cost-effective, voltage regulated, remote power extenders for notification appliance, circuit expansions and provide auxiliary power to support system accessories. They feature steel construction to reduce oxidation on the exposed surfaces and can connect to any 24V volt fire alarm control panel (FACP). These CE-approved extenders have 2-wire sync modes, allowing audible notification appliances (horns) and visual notification appliances (strobes) to be silenced or deactivated simultaneously. Additionally, they offer ground fall detections for preventing damage to the electrical components and the signal circuit, trouble memories help identify intermittent loop problems. These power supply devices utilise sealed, lead acid or gel type back up batteries for excellent heat conduction and the common trouble inputs or outputs for external, trouble signal tie-ins. These LED indicators turn on / off while carrying electricity and are available in 6, 8 & 10A output current ratings.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix power distribution modules are used for powering electromagnetic locks and installing / repairing electromagnetic door locks. They feature steel / phenolic / fibreglass construction for mechanical strength & resisting corrosion on exposed surfaces. These power distribution modules are integrated with LED indicators to show AC input & DC output. They provide relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These units additionally provide automatic detection and protection of legacy non-PoE cameras. These midspans have 8 or 16 ports in a space-saving, 19 inch rack mount chassis to allow easy rack and shelf mounting. They feature easy plug and play installation for user convenience and LED indicators to convey port status.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix offers offline power supply / chargers to convert a 115VAC, 50 / 60Hz input into a 12 or 24VDC output, continuous supply current. They provide filtered & electronically regulated output and automatically switch over to stand-by battery when AC fails. These units can limit overload and short circuit currents and are integrated with LED indicators to show AC input & DC output.