Electromagnetic Lock Power Supplies

Altronix 8-trigger access power controllers are used for converting one 12 to 24VAC/VDC input into eight independently controlled fuse protected outputs. They are ideal for powering electromagnetically controlled doors, locks and electric strikes. They are equipped with a red LED that indicates triggered outputs and a green LED which indicates triggered FACP disconnects. Choose from a wide range of 8-trigger access power controllers, available in steel and fibreglass variants.
Raptor Supplies also offers multi output access power controllers for controlling 4 trigger inputs.

Altronix NetWay midspans / injectors provide pass data & power for PoE compliant cameras or edge devices, located up to 100 meters. They also provide auto detection & protection to legacy, non-PoE devices. They are compatible with the brand's NetWayXT repeater modules for extending distance up to 600 meters and offer up to 30W volt full power per port. These UL-listed devices enable programming of port monitoring & PoE shutdown during LAN or laptop connections and feature illuminated master power disconnect, circuit breakers with manual reset switches for default settings. Further, they have LED ports for proper point-to-point functioning and allow Cat5 cables for ethernet connections up to a distance of 100 meters, ensuring high speed transfers. Choose from a wide range of these devices, available in 8 and 16 port variants.

Altronix linear power supplies / chargers are ideal for access control and security applications. They convert a 115VAC, 50 / 60Hz input to a 12VDC, 2.5A, filtered & electronically regulated output. These power supplies / chargers facilitate automatic switching over to the stand-by battery in case of AC failure, and can be operated at temperatures ranging from 0 to 49 degrees C. The built-in charger stores gel or sealed lead acid batteries and ensures thermal overload & short circuit protection. Variants are available in enclosure heights of 12 and 15.5 inches.

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix access power controllers with power supplies / chargers are used for distributing power to access control systems and compatible accessories. These power controllers convert a 115VAC, 50 / 60Hz input into 16 independently controlled 12 or 24VDC controlled, fuse protected outputs. The outputs of these controllers are activated by normally closed or normally open dry trigger inputs from an access control system, PIR, card reader, keypad or push butto. They can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can withstand temperatures ranging from 32 to 120 degrees F.

Altronix sensitive relay modules are ideal for continuous duty operations in handling switching applications. They feature phenolic material to withstand humidity & high temperatures or have fiberglass construction, providing electrical insulation with chemical resistance. Choose from a wide range of these modules, operating on temperatures ranging from -25 degrees Celsius to 55 degrees Celsius and are available in widths of 1.9 & 2.75 inches.

Altronic video balun / combiners are UL listed accessories used to transmit video, data & power to 24VAC fixed or PTZ indoor / outdoor cameras. These units are compatible with HubWay and HubSat UTP transceiver hubs, for use with 24VAC cameras. These units feature a green power LED indicator to inform about the unit's running status. They are made of plastic and can handle temperatures ranging from 32 to 120 degrees Fahrenheit.

Altronix ACM Series power supplies / chargers are ideal for switching and distributing power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form C-contacts and are activated by open collector sinks or open dry trigger inputs from card readers, access control systems, push button and keypads. They route power to a variety of access control hardware devices including mag locks and magnetic door holders. The outputs operate in both Fail-Safe and Fail-Secure modes for an adjustable voltage output. The FACP (fire alarm control panel) interfaces enable emergency egress, alarm monitoring & to trigger other auxiliary devices. The fire alarm disconnects are individually selectable for any or all of the eight outputs along with relay indicators to prevent overvoltages & overcurrent faults.

Altronix AL1012ULX Series power supplies are designed for converting a 115VAC, 60 Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies feature AC fail supervision to monitor voltage and an alarm to indicate failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switchover to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL300ULX Series power supplies are used for converting a 115VAC, 60 Hz input into 1 / 4 / 8 / 16 fused or PTC protected outputs. These power supplies feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. They are integrated with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. They switch automatically over to stand-by battery in case of AC failure and are capable of being operated at temperatures ranging from 32 to 120 degrees F. They are available in enclosure heights of 13.5 & 15.5 inches.

Altronix AL400UX Series power supplies are used for converting a 115VAC, 60Hz input signal into four Class 2 rated 12 or 24VDC power limited outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are integrated with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. These UL listed power supplies facilitate automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL600ULX Series power supplies are designed for converting a 115VAC, 60Hz input into PTC protected or 1 / 4 / 8 / 16 fused outputs. These power supplies provide AC fail supervision to monitor voltage and sound an alarm upon failure. They are equipped with a built-in charger for gel or sealed lead acid batteries and ensure thermal overload & short circuit protection. They allow automatic switching over to the stand-by battery in case of AC failure and can be operated at temperatures ranging from 0 to 49 degrees C.