GRAINGER 13R507 Rolling Workbench, 13R507 x 32 x 34 Inch Size, 3400 lbs., Tan, Steel

This rolling workbench can carry loads in more than one way and offers plentiful storage with shelves & drawers.

Features:

• This rolling workbench comes with a heavy-duty top to provide a handy work surface of about 13 sq.ft.
• It features a 12-gauge steel body and 7-gauge bottom & top with fully arc-welded seams & powder-coated finish to ensure industrial-grade protection against corrosion & damage.
• This work surface supports the installation of multiple pipe threaders and vices.
• It has two 1 & 9-inch-deep drawers on the right side.
• This unit has drawers that glide on smooth ball bearings and have a load capacity of 100 lb.
• It comes incorporated with shelf runs through the left compartments and three front & back doors for easy access.
• This unit comes with recessed lock housing and a locking system with a 3-point foot release latch for theft prevention.
• It is equipped with 2 swivel and 2 rigid 8-inch casters for improved manoeuvrability.

Frequently Asked Questions:

Q. How is this mobile workbench installed?

A.

• Remove the handle kit from the cabinet.
• Attach the door handles.
• Insert one hole plug into each end of the push handle and attach the handle to the end with the swivel casters.
• Thread the black lift knob into the bottom of the slot in the door centerpost.
• Install the lock system properly.
• Remove the tape from the swivel casters.
• Using a mechanical lifting device, raise the cabinet slightly anf knock the honeycomb blocks off of the cabinet bottom using a rubber mallet.