HinderRust Protector(15 Products)
FLUORAMICS

Fluoramics HinderRust protector sprays are designed using the brand's patented Tufoil technology to provide a non-flammable and solvent-free performance, as well as prevent the solution from getting evaporated. These rust inhibitor sprays easily spread across wide surfaces, by displacing the water, and bond to the affected surface immediately, without any lag. They provide a highly efficient surface film management by creating a thin film of anti-corrosion properties and serve as an obstacle to water and salts. Fluoramics HinderRust protector sprays are offered in three versions: The Temporary Rust Protector (R2.0), The Lubricating Rust Stopper (S4.0) and the long-term Rust Shield (HV100) serving to a wide range of applications, such as restoring a stiff and rusty bike and lubricating gearboxes, garage doors, outdoor equipment, furniture and hydraulic cylinder pistons.

• Shake the rust protector before use.
• Apply on a new or rusty metal surface by brushing or spraying. Evenly coat the surface with a thin, glossy layer.
• HinderRUST will wet & spread to penetrate between layers of metal for stopping corrosion.
• These rust shields are not conductive and hence can be brushed directly onto electrical connections.
• Equipment that are coated can be immediately used. HinderRUST corrosion preventers start protecting & lubricating the surface immediately upon application.

• Fluoramics HinderRUST protectors are scientifically-formulated corrosion inhibitors that last long and prevent corrosion.
• Tufoil technology used in this rust stoppers provide a non-flammable & solvent-free performance.
• They are silicone free for safe operation around paints.
• These rust shields do not evaporate to last longer than other inhibitors and require less reapplication.
• They are available in several variants namely, temporary rust protector (R2.0), lubricating rust stopper (S4.0), long-term rust shield (HV100) & industrial grade liquid-to-wax metal protection (HV500).
• Temporary rust protectors (R2.0) provide temporary surface protection for metallic items during transportation or after fabrication. They can be removed by washing for final finishing.
• Lubricating rust stoppers (S4.0) are the standard silicone-free self-repairing rust protectors & lubricants that stick aggressively to the surface while spreading actively into deep corners, cracks & crevasses. These rust protectors last longer and are very hard to remove due to exposure to normal weather elements.
• Long-term rust shields (HV100) are the heavy-duty version of these rust stoppers that thicken over time to create a gel-like shield, protecting from extreme conditions. They slowly self-polymerise after application without hardening to a solid surface.
• Industrial grade liquid-to-wax metal protections (HV500) are non-drying blackened versions of HinderRUST for stronger rust control while covering over rust. These industrial grade versions provide UV protection and contain thixotropic properties for outside exposure protection. These liquids thicken over time to produce a wax-like surface protectant.

Q. Why are HinderRUST products better than other rust inhibitors?

A.

• Surface Active Technology: HinderRUST products feature surface active compounds that use adsorption for spreading across the metal surface of metal & molecularly adhere to the surface. This creates a HinderRUST film on the metal surface that is difficult to wash off without applying high-pressure water or solvents.
• No Solvents: HinderRUST products being 100% solvent-free provide the safest rust prevention.
• Displaces Water: HinderRUST products displace moisture from metal surfaces for chemically bonding with them and preventing future moisture & oxygen exposure.
• Anti-Rust Lubricant: HinderRUST products act as a lubricant for the smooth operation of stalled, rusted or jammed equipment / tool.

Q. How often should users reapply HinderRUST to their tools?

A. Users should reapply these rust inhibitors as needed for long-lasting rust protection. The frequency of reapplication depends on usage, environment & storage conditions. Equipment stored in a dry, covered environment need less reapplication compared to those that are used / stored in humid & rainy conditions.

Q. Can users weld through a HinderRUST coated surface?

A. HinderRUST S4.0 rust protectors are weld-through approved for welding the coated products.