35SS Series Commercial Meter Stack Modules(14 Products)
EATON

• They have aluminium construction to resist corrosion on exposed surfaces.
• These stack modules come with a EUSERC-required test-bypass disconnect feature and ring type covers.
• These units have provisions for two-pole main tenant breakers and can exit top, back or bottom if used in outdoor applications.
• When applying 35SS (single-phase) stacks on 208Y / 120V, three-phase, four-wire and 240 / 120V, three-phase, four-wire delta systems, refer to suffixes for proper phase balancing.
• They are phase balanced at the plant (A-B, B-C or A-C) and cannot be field modified.

Q. Can the meters in a commercial meter stack be replaced or upgraded?

A. Yes, the meters in a commercial meter stack can be replaced or upgraded for enhanced accuracies or to try new updated versions. The process for upgrading / replacing the meters depends on the utility company's policies and the needs of the building.

Q. How much torque is used to bolt on the main bus joint in these commercial meter stacks?

A. 25 foot-pounds.

Q. What is the short circuit rating of these commercial meter stacks?

A. These commercial meter stacks can withstand short circuits up to 100A depending upon the required kAIC.