What general safety instructions should be followed while operating Baldor motors?

Avoid overtightening of belts as this may cause shaft breakage or premature bearing failure.Allow clearance for end to end shaft movement.Direct coupled machines should be precisely aligned and the shaft should rotate smoothly without any binding.

What are the factors to consider while purchasing a motor?

A current powers the motor, but excessive current can damage the motor as well. For DC motors, stall and operating current are important. Stall current applies sufficient torque for the motor to run either at stall speed or 0 RPM. This is the maximum amount of current the motor can draw. Overcurrent may lead to a rise in heat, resulting in wire melting.Voltage is important as it keeps net current flowing in a single direction and overcomes back current. The higher the voltage, the higher the torque. Make sure that the recommended voltage is applied. If you apply very low voltage, the motor will not work, while applying too much voltage can lead to a short-circuit and consequently result in power loss or complete failure.Operating torque is the amount of torque produced by the motor, while stall torque generates when you apply power from stall speed. The user must look at the required operating torque, but some applications require knowing how far to push the motor. For example, with a wheeled robot, good torque means good acceleration, but you should make sure the stall torque is high enough to lift the weight of the robot. In this case, torque is more important than speed.Velocity or speed can be complex in regards to motors. Generally, a motor runs smoothly & efficiently at the highest speed, but it is not always possible if gearing is needed. Adding gears will reduce the motor efficiency, so reduce both the speed and torque simultaneously.

Farm Duty Motors

Filter

Farm duty motors work well in harsh & rugged operations and are ideal for agricultural settings. They feature enclosures that protect them from moisture. These motors are suitable for...Read more

U S MOTORS -

Farm Duty AC Motors

Style	Model	Item	Price (inc. VAT)
A	FD34CM2P	Farm Duty Motor	£540.74
B	FD1CM2P14	Farm Duty Motor	£945.98
A	FD32CM2P14	Farm Duty Motor	£635.44
C	FD12CM2PC	Motor	£632.80
D	FD12BA2P	Motor	£448.39
D	FD12BA2P9	Motor	£571.34
E	FD1CM2PZ	Motor	£622.70

MARATHON MOTORS -

Farm Duty/Agricultural, 1 Ph, TEAO, Direct Drive-Thru Bolt, 1 Spd

Style	Model	Nameplate RPM	Frame	Full Load Amps	RPM Range	Service Factor	Shaft Dia.	Shaft Length	Thermal Protection	Price (inc. VAT)
A	5KCP49UN9837S	850	56Y	3.7-3.6	Under 1000	1.0	5/8"	1.875"	Auto	£653.04
B	048S17T2004	1725	48Y	4	1701-1800	1.00	1/2"	1 9/16"	Manual	£246.67

LEESON -

Agricultural Duty Crop Dryer Motors, Single Phase, Drip Proof Air Over, Rigid Base

Style	Model	Power Factor	Duty	Frame	RPM	Type	Voltage	Full Load Amps	HP	Price (inc. VAT)
A	140640.00	82 / 94	Continuous	215TZ	3600 / 3600	KD	230 / 230	39.5 / 61.5	10 / 15	£1,901.36
B	131847.00	82.5	AIROVER	182TZ	3600	CD	230	27.2-35	5-7	£1,242.85
C	131848.00	93.5 / 96.5	AIROVER	182TZ	3600 / 3600	KD	230 / 230	31 / 42	7 1/2 / 10	£1,482.30
D	141084.00	97.5	Continuous	215TZ	3600 / 3600	KD	230 / 230	40 / 59	10 / 15	£1,901.36

LEESON -

Industry Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Style	Model	Full Load Amps	HP	kW	Motor Thermal Protection	Power Factor	Price (inc. VAT)
A	117878.00	6.6 / 3.1-3.3	1/3	0.25	MED4772	60	£489.60
B	117879.00	8.8 / 4.2-4.4	1/2	.37	MED3778	58	£551.48
C	117881.00	13.4 / 6.8-6.7	1	.75	CED3706	69.5	£1,381.55

LEESON -

Industry Agricultural Duty Motors, Single Phase, TEFC, Rigid Base

Style	Model	Type	Design	Frame	Voltage	Full Load Amps	HP	kW	Motor Thermal Protection	Price (inc. VAT)
A	117862.00	CF	N	56	115 / 208-230	6.6 / 3.1-3.3	1/3	0.25	MED4772	£438.66
B	117863.00	CF	L	56	115 / 208-230	8.8 / 4.2-4.4	1/2	.37	MED3778	£472.29
C	117865.00	CF	L	56	115 / 208-230	13.4 / 6.8-6.7	1	.75	CED3706	£640.30
D	117864.00	CF	L	56	115 / 208-230	11 / 5.4-5.5	3/4	0.56	CED2791	£569.10
E	117866.00	KF	L	56H	115 / 208-230	15.2 / 8.2-7.6	1.5	1.12	BRD2997	£778.58
F	117867.00	KF	L	56HZ	115 / 230	18.8 / 9.4	2	1.49	BRJ45DA	£890.12

LEESON -

High Torque Agricultural Duty Motors, Single Phase, TEFC, C Face With Base

Style	Model	Shaft Dia.	Design	Frame	Type	Voltage	Full Load Amps	HP	kW	Price (inc. VAT)
A	131994.00	1 1/8"	L	184TC	CF	230	19.0	3	2.24	£1,598.92
B	131995.00	1 1/8"	L	184TC	KF	230	20.5	5	3.7	£1,790.65
C	116489.00	5/8"	L	56HC	KF	115 / 208-230	17.2 / 8.8-8.6	1.5	1.12	£840.23
D	116488.00	5/8"	N	56C	CF	115 / 208-230	14 / 7	1	0.75	£708.48

LEESON -

60 Hertz Feed Auger Drive Agricultural Duty Motors, Single Phase, TEFC

Style	Model	kW	Assembly	Design	Length Less Shaft	Lubrication	Max. Ambient Temp.	Motor Shaft Design	Motor Thermal Protection	Price (inc. VAT)
A	101120.00	.37	LO101120	O	9 7/32"	Polyrex EM	104° F	Flat	Manual	£592.78
B	101119.00	.56	LO101119	N	9 31/32"	VERIFY	104° F	Keyed	Manual	£1,107.22
C	101159.00	.246	LO101159	-	8 31/32"	Polyrex EM	104° F	Keyed	Manual	£868.42
D	112615.00	0.75	LC-48	N	-	Polyrex EM	40	-	CED2797	£770.80

DAYTON -

General Purpose Farm Duty Motors, 3 Phase
Dayton general-purpose farm-duty motors are ideal for use in high-torque applications like air compressors, augers, pumps, conveyors and other farm equipment. These 3-phase motors have greater efficiency than single-phase motors of similar specifications and do not need running / starting capacitors or centrifugal starting switches that fail or wear out. They have rolled steel frame for strength and durability and keyed motor shafts to rotate clockwise or counter-clockwise for continuous duty cycles. These motors feature totally enclosed fan-cooled enclosure design for cooling the motor and protecting them from moisture. They have a rigid base for all angle / horizontal mounting. Choose from a wide range of these motors, available in power outputs ranging from 1/3 to 10 hp.

Style	Model	Motor Mounting Position	Finish	Frame	Mounting	Mounting Position	Nameplate RPM	Nominal Efficiency	Overall Length	Price (inc. VAT)
A	1EJR5	All Angle	Gray	56	Base	Horizontal or Vertical	1725	79.5%	11"	£551.17
B	1EJR4	All Angle	Gray	56	Base	Horizontal or Vertical	1725	72.7%	11"	£482.50
A	1EJR3	All Angle	Gray	56	Base	Horizontal or Vertical	1725	75.9%	11"	£536.03
C	35Z916	Horizontal	Dayton Grey	143T	Rigid Base	Horizontal	1760	85.5%	12.75"	£1,097.36
D	35Z920	Horizontal	Dayton Grey	184T	Rigid Base	Horizontal	1760	89.5%	14.875"	£2,003.50
E	35Z921	Horizontal	Dayton Grey	213T	Rigid Base	Horizontal	1765	91.7%	18.75"	£1,929.61
F	35Z917	Horizontal	Dayton Grey	145T	Rigid Base	Horizontal	1750	86.5%	13.25"	£960.58
G	35Z918	Horizontal	Dayton Grey	145T	Rigid Base	Horizontal	1745	86.5%	14.25"	£1,088.55
H	35Z919	Horizontal	Dayton Grey	182T	Rigid Base	Horizontal	1760	89.5%	13.875"	£1,466.87
I	35Z922	Horizontal	Dayton Grey	215T	Rigid Base	Horizontal	1765	91.7%	19.75"	£2,518.88

WORLDWIDE ELECTRIC -

Integral Farm Duty Motors

Style	Model	Price (inc. VAT)
A	FD10-18-215T	£1,777.33	RFQ
B	FD2-18-145T	£636.55	RFQ
C	FD7.5-18-215T	£1,524.89	RFQ
D	FD10-18-215TC	£1,851.38	RFQ
E	FD2-18-182T	£705.96	RFQ
F	FD2-18-182TC	£798.61	RFQ
G	FD3-18-184T	£840.03	RFQ
H	FD3-18-184TC	£875.03	RFQ
I	FD5-18-184T	£990.51	RFQ
J	FD5-18-184TC	£1,031.80	RFQ
K	FD7.5-18-215TC	£1,588.42	RFQ
L	FD7.5-18-215TZ	£1,524.89	RFQ

DAYTON -

Capacitor Start General Purpose Farm Duty Motors
Dayton capacitor-start general purpose farm duty motors are used to power silo unloaders, barn cleaners, conveyors, compressors and manure pumps. They feature a totally enclosed fan-cooled enclosure to prevent motor heating and are integrated with ball bearings for less rotational friction while running at a maximum speed of 1740 rpm. These motors have green baked enamel finish for corrosion resistance, and are available in shaft diameters of 5/8 & 7/8 inches.

Style	Model	Shaft Length	Frame	Full Load Amps	HP	Length Less Shaft	Motor Design	Overall Length	Shaft Dia.	Price (inc. VAT)
A	1TMW3	2 1/16"	56C	6.6/3.3	1/3	9 15/16"	Capacitor-Start	11 13/16"	5/8"	£571.16
B	1TMW5	2 1/16"	56C	8.8/4.4	1/2	9 15/16"	Capacitor-Start	11 13/16"	5/8"	£505.62
C	1TMW7	2 1/16"	56C	11.0/5.5	3/4	10.437"	Capacitor-Start	12 5/16"	5/8"	£579.50
D	1TMW9	2 1/16"	56HC	13.4/6.7	1	10 15/16"	Capacitor-Start	12 13/16"	5/8"	£706.85
E	1TMX2	2 1/16"	56HC	15.2/7.6	1.5	11 15/16"	Capacitor-Start/Run	13 13/16"	5/8"	£770.21
F	1TMW2	2.125"	145TC	18.8/9.4	2	12.75"	Capacitor-Start	14.875	7/8"	£1,009.89

BALDOR MOTOR -

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Single Phase, Totally Enclosed, Cooled

Style	Model	Power Factor	Amps	Break-down Torque	Service Factor	Speed	Voltage	Frame	Full Load Amps	Price (inc. VAT)
A	GDL2333T	96	69.0 A @ 208 V 61.0 A @ 230 V	144 LB-FT	1	1,740 rpm	208 V 230 V	256TZ	61.0 A	£12,640.09
A	GDL3770T	96	29.6 A	63 LB-FT	1.15	1,750 rpm	230 V	215TZ	29.6 A	£4,188.87
A	GDL3774T	98	38.0 A	78.7 LB-FT	1	1,740 rpm	230 V	215TZ	38.0 A	£4,844.91

BALDOR MOTOR -

Extra High Torque Farm Duty Motors, Single Phase, Foot Mounted

Style	Model	Power Factor	Amps	Break-down Torque	Revision	RPM	Type	Voltage	Frame	Price (inc. VAT)
A	FDL3611TM	67	28/14	23 LB-FT	Z	1725	3634L	115/230	182T	£3,472.07
A	FDL3611M	73	24.8/12.4	16 LB-FT	Z	1725	3634L	115/230	184	£3,562.28
B	FDL3610TM	76	15.5	32 LB-FT	T	1750	3640LC	230	184T	£4,127.04
B	FDL3610M	76	15.5	32 LB-FT	R	1750	3640LC	230	184	£4,228.96
C	FDL3612TM	88	23	43 LB-FT	B	1725	3646LC	230	184T	£4,330.90
B	FDL3619TM	90	13.2	22 LB-FT	AB	1725	3634LC	230	184T	£3,323.34
D	FDL3731M	93	20.5	50 LB-FT	-	1740	3730LC	230	215	£5,321.72
E	FDL3712TM	94	40	90 LB-FT	B	1725	3750LC	230	215T	£6,195.59
E	FDL3737TM	96	39	107.2 LB-FT	E	1730	3752LC	230	215T	£6,594.90
D	FDL3733TM	97	30	-	E	1730	3740LC	230	213T	£5,637.49
D	FDL3732M	97	30	-	-	1730	3740LC	230	213	£6,123.73

BALDOR MOTOR -

Super-E Farm Duty Motors, Three Phase

Style	Model	Motor Type	Amps	Break-down Torque	Number of Poles	Output	Overall Length	Phase	Power Factor	Price (inc. VAT)
A	FDEM3714T	-	-	-	-	-	20.52"	3 ph	-	£4,399.39
A	FDEM3611T	-	-	-	-	-	16.55"	3 ph	-	£2,484.59
A	FDEM3558	-	-	-	-	-	13.23"	3 ph	-	£2,177.15
A	FDEM4103T	-	-	-	-	-	27.76"	3 ph	-	£10,710.24
A	FDEM4104T	-	-	-	-	-	27.76"	3 ph	-	£12,678.54
A	FDEM2334T	-	-	-	-	-	23.66"	3 ph	-	£8,193.93
A	FDEM2333T	-	-	-	-	-	23.66"	3 ph	-	£6,778.70
A	FDEM3558T	-	-	-	-	-	13.31"	3 ph	-	£2,242.29
A	FDEM4110T	-	-	-	-	-	30.28"	3 ph	-	£16,678.60
A	FDEM3710T	-	-	-	-	-	19.02"	3 ph	-	£3,904.81
A	FDEM3615T	-	-	-	-	-	18.05"	3 ph	-	£2,713.48
A	FDEM2394T	0930M	38.0 A @ 208 V 35.0 A @ 230 V 17.5 A @ 460 V	105 LB-FT	2	15.000 hp	23.66"	3	87	£7,395.26
A	FDEM4106T	0936M	50.0 A @ 208 V 46.0 A @ 230 V 23.0 A @ 460 V	111 LB-FT	2	20.000 hp	23.66"	3	89	£8,108.71
A	FDEM4107T	0946M	62.0 A @ 208 V 58.0 A @ 230 V 29.0 A @ 460 V	124 LB-FT	2	25.000 hp	24.71"	3	87	£10,569.91
A	FDEM4108T	0950M	74.0 A @ 208 V 68.0 A @ 230 V 34.0 A @ 460 V	173 LB-FT	2	30.000 hp	24.71"	3	89	£12,533.18
A	FDEM4109T	1240M	100.0 A @ 208 V 92.0 A @ 230 V 46.0 A @ 460 V	230 LB-FT	2	40.000 hp	28.78"	3	88	£17,266.73
A	FDEM4114T	1252M	122.0 A @ 208 V 112.0 A @ 230 V 56.0 A @ 460 V	292 LB-FT	2	50.000 hp	28.78"	3	90	£18,864.06
A	FDEM4115T	1272M	128.0 A @ 208 V 116.0 A @ 230 V 58.0 A @ 460 V	396 LB-FT	4	50.000 hp	30.28"	3	85	£18,197.41
A	FDEM3546T	3520M	3.1 A @ 208 V 3.0 A @ 230 V 1.5 A @ 460 V	13.5 LB-FT	4	1.000 hp	12.31"	3	71	£2,105.29
A	FDEM3546	3520M	3.1 A @ 208 V 3.0 A @ 230 V 1.5 A @ 460 V	-	4	1.000 hp	12.23"	3	71	£2,076.88
A	FDEM3554	3526M	4.6 A @ 208 V 4.4 A @ 230 V 2.2 A @ 460 V	20.6 LB-FT	4	1.500 hp	13.23"	3	72	£2,123.67
A	FDEM3554T	3526M	4.6 A @ 208 V 4.4 A @ 230 V 2.2 A @ 460 V	20.6 LB-FT	4	1.500 hp	13.31"	3	72	£2,165.45
A	FDEM3610T	3540M	7.7 A @ 208 V 7.0 A @ 230 V 3.5 A @ 460 V	20.5 LB-FT	2	3.000 hp	16.52"	3	92	£2,574.82
A	FDEM3613T	3630M	11.8 A @ 230 V 5.9 A @ 460 V	33.7 LB-FT	2	5.000 hp	16.55"	3	91	£2,883.91
A	FDEM3709T	3728M	19.4 A @ 208 V 18.0 A @ 230 V 9.0 A @ 460 V	40.4 LB-FT	2	7.500 hp	17.89"	3	84	£4,305.82

BALDOR MOTOR -

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Three Phase, Totally Enclosed Cooled

Style	Model	Overall Length	Amps	Break-down Torque	Power Factor	Speed	Voltage	Frame	Frame Material	Price (inc. VAT)
A	EGDM3665T	16.42"	14.0 A @ 208 V 13.2 A @ 230 V 6.6 A @ 460 V	53.9 LB-FT	79	1,750 rpm	208 V 230 V 460 V	184TZ	Iron	£2,460.90
A	EGDM3661T	16.42"	8.6 A @ 208 V 8.2 A @ 230 V 4.1 A @ 460 V	33.1 LB-FT	77	1,755 rpm	208 V 230 V 460 V	182TZ	Iron	£2,159.56
A	EGDM3615T	19.05"	13.9 A @ 208 V 13.4 A @ 230 V 6.7 A @ 460 V	52.2 LB-FT	78	1,750 rpm	208 V 230 V 460 V	184TZ	Steel	£3,871.40
A	EGDM3770T	19.45"	19.8 A @ 208 V 19.0 A @ 230 V 9.5 A @ 460 V	57.4 LB-FT	81	1,770 rpm	208 V 230 V 460 V	213TZ	Iron	£3,027.48
A	EGDM3710T	20.03"	20.0 A @ 208 V 19.0 A @ 230 V 9.5 A @ 460 V	-	80	1,770 rpm	230 V 460 V	213TZ	Steel	£4,765.32
A	EGDM3714T	21.53"	25.4 A @ 208 V 24.0 A @ 230 V 12.0 A @ 460 V	134 LB-FT	85	1,770 rpm	230 V 460 V	215TZ	Steel	£6,919.07
A	EGDM2333T	24.66"	38.0 A @ 208 V 36.2 A @ 230 V 18.1 A @ 460 V	-	83	1,765 rpm	230 V 460 V	254TZ	Iron	£9,335.13
A	EGDM2334T	24.66"	52.0 A @ 208 V 48.0 A @ 230 V 24.0 A @ 460 V	232 LB-FT	83	1,770 rpm	230 V 460 V	256TZ	Iron	£9,883.18
A	EGDM4103T	28.76"	64.0 A @ 208 V 62.0 A @ 230 V 31.0 A @ 460 V	262 LB-FT	81	1,775 rpm	230 V 460 V	284TZ	Iron	£12,444.60
A	EGDM4104T	28.76"	78.0 A @ 208 V 76.0 A @ 230 V 38.0 A @ 460 V	330 LB-FT	80	1,760 rpm	230 V 460 V	286TZ	Iron	£14,588.34
A	EGDM4115T	31.28"	128.0 A @ 208 V 116.0 A @ 230 V 58.0 A @ 460 V	396 LB-FT	85	1,775 rpm	230 V 460 V	326TZ	Iron	£20,005.28
A	EGDM4110T	31.28"	102.0 A @ 208 V 96.0 A @ 230 V 48.0 A @ 460 V	386 LB-FT	82	1,775 rpm	230 V 460 V	324TZ	Iron	£19,341.96

MARATHON MOTORS -

Farm Duty/Agriculture Motors, High Torque, Single Phase, TEFC, C Face Footed

Style	Model	Frame	Full Load Amps	HP	kW	NEMA Design	Price (inc. VAT)
A	056C17F5912	56C	8.8/4.2-4.4	1/2	0.37	N	£466.83
B	056C17F5358	56C	6.6/3.1-3.3	1/3	0.25	N	£398.99
C	056C17F5914	56C	13.4/6.8-6.7	1	0.75	N	£583.28
D	056C17F5913	56C	11/5.4-5.5	3/4	0.56	L	£535.13
E	056B17F5584	56HC	15.2/8.2-7.6	1.5	1.12	N	£672.28

MARATHON MOTORS -

Farm Duty/Agriculture Motors, Auger Drive, Single Phase, TEFC, N Flange

Style	Model	Frame	Full Load Amps	HP	Hz	RPM	Service Factor	Voltage	Price (inc. VAT)
A	5KH39QN9508Y	48NY	5.3/2.7A	1/3	60 Hz	-	1	115/230V AC	£1,337.09
B	5KC46JN0076U	56NY	8.4/4.0-4.2	1/2	50/60	1725/1425	1.25	115/208-230	£536.75
C	5KCR49WN0295U	56NY	14.5/7.1-7.3	1.5	60	1725	1.15	115/208-230	£761.14
D	5KCR49PN0077U	56NY	8.4/4.5-4.2	3/4	50/60	1725/1425	1.25	115/208-230	£633.56

LEESON -

Catfish Pond Agricultural Duty Motors, Single And Three Phase, TEFC, C Face With Base

Style	Model	Voltage	Full Load Amps	Hz	Phase	Power Factor	Rotation	RPM	Type	Price (inc. VAT)
A	140705.00	230	40	60	1	95	SELECTIVE CCW	1800	KF	£2,564.88
A	140833.00	230 / 460	26.8 / 13.4	50/60	3	77 / 79	REV	1800 / 1500	TF	£1,877.28

DAYTON -

Agricultural & Poultry Fan Motors, Permanent Split Capacitor
Dayton agricultural fan motors or poultry fan motors feature high starting torque to start under heavy loads. They provide reliable performance in rough & dirty environments, and are ideal for poultry equipment, crop drying, manure pumps, conveyors & augurs. These CSA certified motors feature rolled steel frame construction to resist corrosion and have totally enclosed, air-over enclosures to protect against dampness & airborne particles. They are equipped with ball bearings to increase motor performance, thereby preventing lubricant leaks. These UL listed motors have a rigid base and permanent split capacitor design for load distribution & high efficiency, respectively. They include extended thru bolts, shaft adapters, gasketed capticator covers & shaft slingers, and operate on continuous duty cycle to deliver constant power to the machinery & tools, without experiencing downtime. Choose from a wide range of these motors, available in stud, base and face mounting styles.

Style	Model	Mounting Position	Frame	Full Load Amps	Nameplate RPM	Overall Length	Rotation	RPM Range	Service Factor	Price (inc. VAT)
A	1YBA7	All Angle	56CZ	5.8	850	14.375"	CWSE	Under 1000	1.0	£674.67
B	1YBA1	All Angle	56CZ	5.8	850	15.125"	CWSE	Under 1000	1.0	£666.03
C	1YBA5	Horizontal or Vertical	48Y	3.6/1.8	1100	8.75"	CW/CCW	1001-1100	1.0	£375.47
D	1YBA4	Horizontal or Vertical	48Y	3.6/1.8	1100	9.75"	CW/CCW	1001-1100	1.0	£778.82
E	1YBA6	Horizontal or Vertical	56Z	6.6/3.3	850	12"	CW/CCW	Under 1000	1.0	£854.52
F	1YAZ3	Horizontal or Vertical	48Y	6.0/3.0	850	10 13/16"	CW/CCW	Under 1000	1.25	£386.40

MARATHON MOTORS -

Farm Duty/Agricultural Motors, Single Phase, TEAO, Direct Drive-Thru Bolt, Two Speed

Style	Model	Frame	Full Load Amps	HP	Length Less Shaft	Nominal Efficiency	Overall Length	Price (inc. VAT)
A	048S17T366	48	4.1 / 2.5	1/4, 1/12	8.5"	62%	11 1/16"	£457.51
B	048S17T365	48Y	5.3 / 2.9	1/3, 1/8	8.75"	64%	11 15/16"	£528.73

DAYTON -

Aeration Fan Motors, Permanent Split Capacitors
Dayton aeration fan motors are used in high torque installations such as silo unloaders, conveyors, compressors, barn cleaners and manure pumps, enabling them to start under heavy load conditions. They feature rolled steel frame construction to resist corrosion and have totally enclosed air over enclosures to protect against dampness & airborne particles. These UL recognised motors have a permanent split capacitor design for high efficiency and a rigid base for balanced load distribution. They include capacitor covers, gasketed conduit boxes and rubber boots over the manual protector reset buttons to seal the motor against contaminants & weather. These CSA certified motors have shaft slingers to seal & protect shaft bearings by blocking dust & other particles, while retaining lubricants. The integrated ball bearings increase motor performance and operate on a continuous duty cycle to deliver constant power to machinery & tools, without experiencing downtime. They mount horizontally or at all angle positioning and offer cradle / stud / yoke mounting types. Choose from a broad range of these motors, available in torque speeds of 1/2, 1/3 and 1/4 hp.

Style	Model	Overall Length	Full Load Amps	HP	RPM Range	Length Less Shaft	Motor Mounting Position	Mounting	Mounting Position	Price (inc. VAT)
A	1YAZ8	9.5"	3.6/1.8	1/3	1701-1800	7"	All Angle	Yoke	All Angle	£425.12
B	1YAZ5	9.5"	3.6/1.8	1/3	1701-1800	7"	Horizontal	Cradle/Stud	Horizontal	£324.61
C	1YAZ7	9.5"	3.4/1.7	1/4	1601-1700	7"	All Angle	Yoke	All Angle	£401.28
D	1YAZ4	9.5"	3.4/1.7	1/4	1601-1700	7"	Horizontal	Cradle/Stud	Horizontal	£354.31
E	1YAZ6	10.875"	5.5/2.8	1/2	1601-1700	8.375"	Horizontal	Cradle/Stud	Horizontal	£463.08
F	1YAZ9	10.875"	5.5/2.8	1/2	1601-1700	8.375"	All Angle	Yoke	All Angle	£457.26

DAYTON -

Capacitor Start Auger Drive Motors
Dayton capacitor start auger drive motors are used for powering grain augers found in poultry raising operations. These motors feature frames made of rolled steel for structural rigidity and resisting corrosion on exposed surfaces. They have totally enclosed fan-cooled enclosures to prevent overheating of the motor, and are equipped with ball bearings for low rotational friction while running at a maximum speed of 1725 rpm. These motors allow flange / base mounting for easy installation, and are available in 1/2, 3/4 & 1 hp variants.

Style	Model	Mounting	Finish	Frame	Overall Length	Service Factor	Shaft Dia.	Shaft Length	Full Load Amps	Price (inc. VAT)
A	3K995	Flange	-	56YZ	11 9/16"	1.0	1/2"	1.75"	7.2/3.6	£419.45
B	3K996	Flange	-	56YZ	12 9/16"	1.0	1/2"	1.75"	9.1/4.6	£553.58
C	5K046	Flange/Base	Green Baked On Enamel	56YZ	12.593	1.0	1/2"	1.75"	9.1/4.6	£596.79
D	4K997	Flange/Base	Dayton Farm Duty green	56Y	12 15/16"	1.15	5/8"	2.125"	12.6/6.3	£694.16
E	5K044	Flange/Base	-	56YZ	-	1.0	1/2"	1.75"	7.2/3.6	£510.30

12 3 4

Farm Duty Motors

Farm duty motors produce high starting torque and facilitate moderate starting current for conveyors, barn cleaners, compressors and manure pumps. These pre-lubricated units feature an epoxy finish for resistance against high temperature & moisture, offering smooth movement of the motor components. Raptor Supplies offers a wide range of these farm duty motors from brands like Baldor, Century, Dayton, Marathon Motors and Leeson. Baldor farm motors feature double-sealed bearings to reduce the frictional losses and prevent overheating. These farm duty motors are also integrated with a condensate drain valve to remove the excess moisture condensed by cooling of the motor, which may lead to corrosion of motor parts and bursting of the pump when the water freezes. Dayton farm duty motors are capable of delivering continuous-duty operations in applications like aeration fans, auger drives, grain stirrers, irrigation tower drives and crop driers. These agricultural motors feature steel frame construction for structural rigidity and withstanding heavy impact loads. They further come equipped with a totally enclosed non-ventilated enclosure with gasketed capacitor covers, junction boxes and shaft slinger for preventing the ingress of external contaminants and motor damage. Totally enclosed farm duty motors from these brands prevent the entrance of insects, rodents and other foreign materials.

Uses

These farm duty motors are suitable for low to high starting torque applications in the aggregate & cement, air handling, food & beverage, chemical, oil and gas industries.

Features

Dayton Farm Duty Motors

Dayton farm duty motors keep fans moving under heavy load conditions.
They have totally enclosed, fan-cooled motor design to prevent the motor from contamination.
These farm duty motors comprise a fan that blows outside over the motor, keeping it cool rather than permitting outside air to circulate freely inside the motor.
They come equipped with a rolled steel frame for enhanced durability and have ball bearings to prevent overheating.
The units are available in horizontal, vertical and all angle installation positions with cradle / stud / yoke / base / flange mounting options, especially designed for operations including hatchery & poultry applications.
These farm duty motors are supplied in single or 3 phase units for efficient and robust performance.

Baldor Super-E & 1 ph Farm Duty Motors

Baldor motors are used on vane axial fan crop dryers with a soft start and deliver full load efficiency on a voltage up to 460V.
These units protect against noise & vibration problems from motor regeneration and are also less sensitive to voltage variations.
They have tan epoxy paint for harsh environments.
Baldor motors provides moisture resistant grease, capable of withstanding temperatures of Class F insulation (up to 155 degrees Celsius).
Baldor 1 ph farm duty motors are made of steel for structural rigidity.

Century Motors

Century agricultural fan motors, featuring high starting torque, provide dependable service during dirty & rough services, such as crop drying, running poultry equipment, manure pumps, augers or conveyors.
They feature double shielded bearings for extended service life.
Further, most of the Century motors have automatic reset thermal protectors to prevent power overload.
The moderate starting torque of motors enables reduction in fan stresses.
They come in a gasketed conduit box to protect wiring from dust entry.

General Purpose Leeson Farm Duty Motors

Leeson general purpose farm duty motors are ideal for rugged use in commercial and industrial settings and are widely used in pumps, compressors, blowers and fans.
The brand's single and three-phase AC motors are explosion proof and designed for continuous duty applications in agriculture, woodworking and metallurgy industries.
They feature double sealed ball bearings for prolonged service life and a gasket capacitor case having a conduit box cover to prevent the entry of foreign contaminants.
These units are available in single and 3 phase motor designs for powerful performance.

Marathon Farm Duty Motors

Marathon farm duty motors are suitable for power generating applications in the automotive, food & beverage, marine and oil & gas industries.
These high torque motors are single-phase units having one / two speed operation.
They have totally enclosed fan cooled, totally enclosed air over or totally enclosed non ventilated enclosures to suit multiple applications.
Further, these units are supplied with thru bolts for quick and secure fastening.
These motors have a direct drive option (incorporating auger drive in selected models), providing maximum speed and positional & dynamic accuracy.

Working Mechanism

Farm duty AC motors work on the principle of magnetism as they contain two fixed magnets and a coil of wire surrounding a shaft. When an electric charge is applied to the coil of wire, it becomes an electromagnet, hence generating a magnetic field. The equipped stator includes a loop of wire, solid metal axle, coil, squirrel cage made of metal bars and some other freely rotating metal parts that are capable of conducting electricity. In an AC motor, sending power to the outer coils make up the stator & the coils energise in sequence & pairs, generating a magnetic field that rotates around the motor.

Standards and Approvals

Dayton motors are manufactured in compliance with ISO industry standard to deliver high quality product services.
Baldor motors are UL listed, NEMA rated and also comply with CSA & CE certifications.
Century farm duty motors are UL listed and adheres to CSA standards.
Leeson duty AC motors are UL and CSA recognised.
Marathon motors have NEMA ratings to guarantee a degree of protection of the equipment inside the enclosure against ingress of foreign objects.

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Farm Duty Motors

Farm Duty AC Motors

Farm Duty/Agricultural, 1 Ph, TEAO, Direct Drive-Thru Bolt, 1 Spd

Agricultural Duty Crop Dryer Motors, Single Phase, Drip Proof Air Over, Rigid Base

Industry Agricultural Duty Motors, Single Phase, TEFC, C Face Less Base

Industry Agricultural Duty Motors, Single Phase, TEFC, Rigid Base

High Torque Agricultural Duty Motors, Single Phase, TEFC, C Face With Base

60 Hertz Feed Auger Drive Agricultural Duty Motors, Single Phase, TEFC

Integral Farm Duty Motors

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Single Phase, Totally Enclosed, Cooled

Extra High Torque Farm Duty Motors, Single Phase, Foot Mounted

Super-E Farm Duty Motors, Three Phase

Grain Dryer/ Centrifugal Fan Farm Duty Motors, Three Phase, Totally Enclosed Cooled

Farm Duty/Agriculture Motors, High Torque, Single Phase, TEFC, C Face Footed

Farm Duty/Agriculture Motors, Auger Drive, Single Phase, TEFC, N Flange

Catfish Pond Agricultural Duty Motors, Single And Three Phase, TEFC, C Face With Base

Farm Duty/Agricultural Motors, Single Phase, TEAO, Direct Drive-Thru Bolt, Two Speed

Farm Duty Motors

Uses

We are here to help!

Looking for a part not listed here?

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

Farm Duty Motors

Farm Duty Motors

Uses

Features

Working Mechanism

Standards and Approvals

Frequently Asked Questions

What general safety instructions should be followed while operating Baldor motors?

What are the factors to consider while purchasing a motor?

We are here to help!

Looking for a part not listed here?

Explore More