Sign In

DOTCO General Air Pencil Grinder

Filter
Air Inlet: 1/4" NPT , Average CFM @ 15 Second Run Time: 2.3 , Bearings: Shielded , Duty: General , Exhaust Type: Rear , Hose Length: 60" , HP: 0.10 , Min. Hose Size: 3/16" , Required Pressure: 90 psi , Throttle: Twist , Variable Speed: Yes
StyleModelCFM @ Full LoadFree SpeedHousing MaterialOverall LengthTool WeightPrice
A
10R0400-18-G
0.960,000 rpmAluminum5 4/5"0.2 lb.£798.66
A
10R0401-18-G
0.960,000 rpmAluminum5 4/5"0.2 lb.£781.50
B
12R0380-18-G
9.080,000 rpmComposite5.5"0.3 lb.£857.06
C
12R0400-43-G
9.060,000 rpmComposite5 4/5"0.3 lb.£859.27
C
12R0410-18-G
9.060,000 rpmComposite5 4/5"0.3 lb.£772.82
C
12R0400-18-G
9.060,000 rpmComposite5.5"0.3 lb.£892.27

General Air Pencil Grinder

The general-duty Dotco precision pencil grinders are designed for metal removal and deburring applications. These rear-exhaust grinders comprise a 0.1 hp motor capable of delivering speeds up to 80000 rpm for a high material removal rate, a twist throttle to vary and control the speed, and a 1/4 inch NPT inlet port for air supply (90 psi). They also feature an aluminium / composite housing to withstand the harshest industrial abuse and shielded bearings for preventing the loss of lubricants. These Dotco grinders are supplied with an applicable collet, collet wrenches, a collet guard, a 5 ft air supply hose and a 1 ft overhose. Variants without collet guard are also available on Raptor Supplies.

We are here to help!

Looking for a part not listed here?